Re: [PATCH v3 2/2] mmc: card: Adding support for Sanitize in eMMC v4.5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/21/2012 11:00 PM, Yaniv Gardi wrote:

> Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
> 
> ---
>  drivers/mmc/card/block.c |   58 ++++++++++++++++++++++++++++++++++++++-------
>  drivers/mmc/card/queue.c |   12 ++++++++-
>  include/linux/mmc/card.h |    7 +++++
>  include/linux/mmc/host.h |    1 +
>  4 files changed, 68 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
> index 0c959c9..5be77e6 100644
> --- a/drivers/mmc/card/block.c
> +++ b/drivers/mmc/card/block.c
> @@ -830,6 +830,9 @@ static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
>  	from = blk_rq_pos(req);
>  	nr = blk_rq_sectors(req);
>  
> +	/* 1ST priority is DISCARD.
> +	   2ND is TRIM
> +	   3RD is ERASE */
>  	if (mmc_can_discard(card))
>  		arg = MMC_DISCARD_ARG;
>  	else if (mmc_can_trim(card))
> @@ -868,18 +871,11 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
>  	unsigned int from, nr, arg;
>  	int err = 0, type = MMC_BLK_SECDISCARD;
>  
> -	if (!(mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))) {
> +	if (!(mmc_can_secure_erase_trim(card))) {
>  		err = -EOPNOTSUPP;
>  		goto out;
>  	}
>  
> -	/* The sanitize operation is supported at v4.5 only */
> -	if (mmc_can_sanitize(card)) {
> -		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> -				EXT_CSD_SANITIZE_START, 1, 0);
> -		goto out;
> -	}
> -
>  	from = blk_rq_pos(req);
>  	nr = blk_rq_sectors(req);
>  
> @@ -922,6 +918,44 @@ out:
>  	return err ? 0 : 1;
>  }
>  
> +int mmc_blk_issue_sanitize_rq(struct mmc_queue *mq,
> +			       struct request *req)
> +{
> +	struct mmc_blk_data *md = mq->data;
> +	struct mmc_card *card = md->queue.card;
> +	int err = 0;
> +
> +	if (!(mmc_can_sanitize(card) && (mq->card->host->caps2 & MMC_CAP2_SANITIZE))) {

if (!mmc_can_sanitize(card) && card->host->caps2 & MMC_CAP2_SANITIZE)?

> +		pr_err("%s: SANITIZE is not supported", __func__);
> +		err = -EOPNOTSUPP;
> +		goto out;
> +	}
> +
> +	pr_info("%s: SANITIZE is supported", __func__);
> +
> +	mmc_sd_card_set_sanitize_in_progress(card);
> +
> +	pr_info("%s: issueing SANITIZE command...", __func__);
> +
> +	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> +					 EXT_CSD_SANITIZE_START, 1, 0);
> +
> +	pr_info("%s: SANITIZE command returned...", __func__);

Too many pr_info()..i think that need not the message..

> +
> +	if (err)
> +		pr_err("%s: mmcblk: mmc_switch() failed. err=%d\n",
> +		       __func__, err);

how about using mmcblkX instead of just mmcblk?

> +
> +	mmc_sd_card_set_sanitize_completed(card);
> +
> +out:
> +	spin_lock_irq(&md->lock);
> +	__blk_end_request(req, err, blk_rq_bytes(req));
> +	spin_unlock_irq(&md->lock);
> +
> +	return err ? 0 : 1;
> +}
> +
>  static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req)
>  {
>  	struct mmc_blk_data *md = mq->data;
> @@ -1379,7 +1413,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
>  		goto out;
>  	}
>  
> -	if (req && req->cmd_flags & REQ_DISCARD) {
> +	if (req && req->cmd_flags & REQ_SANITIZE) {
> +		/* complete ongoing async transfer before issuing discard */

Issuing Sanitize, not discard. typo.

> +		if (card->host && card->host->areq)
> +			mmc_blk_issue_rw_rq(mq, NULL);
> +		ret = mmc_blk_issue_sanitize_rq(mq, req);
> +	} else if (req && req->cmd_flags & REQ_DISCARD) {
>  		/* complete ongoing async transfer before issuing discard */
>  		if (card->host->areq)
>  			mmc_blk_issue_rw_rq(mq, NULL);
> @@ -1396,6 +1435,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
>  		ret = mmc_blk_issue_rw_rq(mq, req);
>  	}
>  
> +
>  out:
>  	if (!req)
>  		/* release host only when there are no more requests */
> diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
> index dcad59c..6946ac1 100644
> --- a/drivers/mmc/card/queue.c
> +++ b/drivers/mmc/card/queue.c
> @@ -140,10 +140,15 @@ static void mmc_queue_setup_discard(struct request_queue *q,
>  	/* granularity must not be greater than max. discard */
>  	if (card->pref_erase > max_discard)
>  		q->limits.discard_granularity = 0;
> -	if (mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))
> +	if (mmc_can_secure_erase_trim(card))
>  		queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q);
>  }
>  
> +static void mmc_queue_setup_sanitize(struct request_queue *q)
> +{
> +	queue_flag_set_unlocked(QUEUE_FLAG_SANITIZE, q);
> +}
> +
>  /**
>   * mmc_init_queue - initialise a queue structure.
>   * @mq: mmc queue
> @@ -181,6 +186,11 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
>  	if (mmc_can_erase(card))
>  		mmc_queue_setup_discard(mq->queue, card);
>  
> +	if ((mmc_can_sanitize(card) && (host->caps2 & MMC_CAP2_SANITIZE)))
> +		mmc_queue_setup_sanitize(mq->queue);
> +	else
> +		pr_info("%s - card doesn't support sanitize", __func__);
> +
>  #ifdef CONFIG_MMC_BLOCK_BOUNCE
>  	if (host->max_segs == 1) {
>  		unsigned int bouncesz;
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 9478a6b..0890e9c 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -236,6 +236,9 @@ struct mmc_card {
>  #define MMC_POWEROFF_SHORT		2
>  #define MMC_POWEROFF_LONG		3
>  
> +/* card is in sanitize progress */
> +#define MMC_STATE_SANITIZE_IN_PROGRESS (1<<9)
> +
>  	unsigned int		erase_size;	/* erase size in sectors */
>   	unsigned int		erase_shift;	/* if erase unit is power 2 */
>   	unsigned int		pref_erase;	/* in sectors */
> @@ -388,6 +391,10 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
>  #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
>  #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
>  #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
> +#define mmc_sd_card_set_sanitize_in_progress(c) ((c)->state |= \
> +		MMC_STATE_SANITIZE_IN_PROGRESS)
> +#define mmc_sd_card_set_sanitize_completed(c) ((c)->state &= \
> +		~MMC_STATE_SANITIZE_IN_PROGRESS)
>  #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
>  #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
>  
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 9a03d03..93210aa 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -242,6 +242,7 @@ struct mmc_host {
>  #define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
>  #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2)	/* Notify poweroff supported */
>  #define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
> +#define MMC_CAP2_SANITIZE	(1<<4)		/* Support Sanitize */
>  
>  	mmc_pm_flag_t		pm_caps;	/* supported pm features */
>  	unsigned int        power_notify_type;


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux