This patch is change to use the sdhci-pltfm.c
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-s3c.c | 218 ++++++++++++++----------------------------
1 files changed, 71 insertions(+), 147 deletions(-)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 1af756e..a651c1e 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -26,6 +26,7 @@
#include <plat/sdhci.h>
#include <plat/regs-sdhci.h>
+#include "sdhci-pltfm.h"
#include "sdhci.h"
#define MAX_BUS_CLK (4)
@@ -41,9 +42,7 @@
* @clk_bus: The clocks that are available for the SD/MMC bus clock.
*/
struct sdhci_s3c {
- struct sdhci_host *host;
struct platform_device *pdev;
- struct resource *ioarea;
struct s3c_sdhci_platdata *pdata;
unsigned int cur_clk;
int ext_cd_irq;
@@ -53,11 +52,6 @@ struct sdhci_s3c {
struct clk *clk_bus[MAX_BUS_CLK];
};
-static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
-{
- return sdhci_priv(host);
-}
-
/**
* get_curclk - convert ctrl2 register to clock source number
* @ctrl2: Control2 register value.
@@ -72,7 +66,8 @@ static u32 get_curclk(u32 ctrl2)
static void sdhci_s3c_check_sclk(struct sdhci_host *host)
{
- struct sdhci_s3c *ourhost = to_s3c(host);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_s3c *ourhost = pltfm_host->priv;
u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
if (get_curclk(tmp) != ourhost->cur_clk) {
@@ -92,13 +87,13 @@ static void sdhci_s3c_check_sclk(struct sdhci_host *host)
*/
static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
{
- struct sdhci_s3c *ourhost = to_s3c(host);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_s3c *ourhost = pltfm_host->priv;
struct clk *busclk;
unsigned int rate, max;
int clk;
/* note, a reset will reset the clock source */
-
sdhci_s3c_check_sclk(host);
for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
@@ -163,7 +158,8 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
*/
static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
{
- struct sdhci_s3c *ourhost = to_s3c(host);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_s3c *ourhost = pltfm_host->priv;
unsigned int best = UINT_MAX;
unsigned int delta;
int best_src = 0;
@@ -233,7 +229,8 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
*/
static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
{
- struct sdhci_s3c *ourhost = to_s3c(host);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_s3c *ourhost = pltfm_host->priv;
unsigned int delta, min = UINT_MAX;
int src;
@@ -251,27 +248,27 @@ static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
{
- struct sdhci_s3c *ourhost = to_s3c(host);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], UINT_MAX);
+ return clk_round_rate(pltfm_host->clk, UINT_MAX);
}
/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
{
- struct sdhci_s3c *ourhost = to_s3c(host);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
/*
* initial clock can be in the frequency range of
* 100KHz-400KHz, so we set it as max value.
*/
- return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], 400000);
+ return clk_round_rate(pltfm_host->clk, 400000);
}
/* sdhci_cmu_set_clock - callback on clock change.*/
static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
{
- struct sdhci_s3c *ourhost = to_s3c(host);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
/* don't bother if the clock is going off */
if (clock == 0)
@@ -279,7 +276,7 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
sdhci_s3c_set_clock(host, clock);
- clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+ clk_set_rate(pltfm_host->clk, clock);
host->clock = clock;
}
@@ -382,52 +379,50 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
}
}
+static struct sdhci_pltfm_data sdhci_s3c_pdata = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_NO_BUSY_IRQ |
+ SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
+ SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE,
+ .ops = &sdhci_s3c_ops,
+};
+
static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
{
struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_pltfm_data *pltfm_pdata = &sdhci_s3c_pdata;
struct sdhci_host *host;
struct sdhci_s3c *sc;
- struct resource *res;
- int ret, irq, ptr, clks;
-
- if (!pdata) {
- dev_err(dev, "no device data specified\n");
- return -ENOENT;
- }
+ int ret, ptr, clks;
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "no irq specified\n");
- return irq;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "no memory specified\n");
- return -ENOENT;
- }
-
- host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
+ host = sdhci_pltfm_init(pdev, pltfm_pdata);
if (IS_ERR(host)) {
dev_err(dev, "sdhci_alloc_host() failed\n");
return PTR_ERR(host);
}
- sc = sdhci_priv(host);
+ sc = kzalloc(sizeof(struct sdhci_s3c), GFP_KERNEL);
+ if (!sc) {
+ ret = -ENOMEM;
+ goto err_alloc_host;
+ }
+
+ pltfm_host = sdhci_priv(host);
+ pltfm_host->priv = sc;
- sc->host = host;
sc->pdev = pdev;
- sc->pdata = pdata;
+ sc->pdata = pdev->dev.platform_data;
sc->ext_cd_gpio = -1; /* invalid gpio number */
- platform_set_drvdata(pdev, host);
-
sc->clk_io = clk_get(dev, "hsmmc");
if (IS_ERR(sc->clk_io)) {
dev_err(dev, "failed to get io clock\n");
ret = PTR_ERR(sc->clk_io);
- goto err_io_clk;
+ goto err_alloc_host;
}
/* enable the local io clock and keep it running for the moment. */
@@ -439,9 +434,8 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
snprintf(name, 14, "mmc_busclk.%d", ptr);
clk = clk_get(dev, name);
- if (IS_ERR(clk)) {
+ if (IS_ERR(clk))
continue;
- }
clks++;
sc->clk_bus[ptr] = clk;
@@ -450,7 +444,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
* save current clock index to know which clock bus
* is used later in overriding functions.
*/
- sc->cur_clk = ptr;
+ pltfm_host->clk = clk;
clk_enable(clk);
@@ -464,53 +458,17 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
goto err_no_busclks;
}
- sc->ioarea = request_mem_region(res->start, resource_size(res),
- mmc_hostname(host->mmc));
- if (!sc->ioarea) {
- dev_err(dev, "failed to reserve register area\n");
- ret = -ENXIO;
- goto err_req_regs;
- }
-
- host->ioaddr = ioremap_nocache(res->start, resource_size(res));
- if (!host->ioaddr) {
- dev_err(dev, "failed to map registers\n");
- ret = -ENXIO;
- goto err_req_regs;
- }
-
/* Ensure we have minimal gpio selected CMD/CLK/Detect */
- if (pdata->cfg_gpio)
- pdata->cfg_gpio(pdev, pdata->max_width);
-
- host->hw_name = "samsung-hsmmc";
- host->ops = &sdhci_s3c_ops;
- host->quirks = 0;
- host->irq = irq;
-
- /* Setup quirks for the controller */
- host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
- host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+ if (sc->pdata->cfg_gpio)
+ sc->pdata->cfg_gpio(pdev, sc->pdata->max_width);
#ifndef CONFIG_MMC_SDHCI_S3C_DMA
-
/* we currently see overruns on errors, so disable the SDMA
* support as well. */
host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
- /* It seems we do not get an DATA transfer complete on non-busy
- * transfers, not sure if this is a problem with this specific
- * SDHCI block, or a missing configuration that needs to be set. */
- host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
-
- /* This host supports the Auto CMD12 */
- host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
-
- /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
- host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
-
if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
@@ -518,17 +476,14 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
host->mmc->caps = MMC_CAP_NONREMOVABLE;
+ /* It supports additional host capabilities if needed */
if (pdata->host_caps)
- host->mmc->caps |= pdata->host_caps;
-
- if (pdata->pm_caps)
- host->mmc->pm_caps |= pdata->pm_caps;
+ host->mmc->caps |= sc->pdata->host_caps;
- host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
- SDHCI_QUIRK_32BIT_DMA_SIZE);
+ host->mmc->caps2 |= MMC_CAP2_BROKEN_VOLTAGE;
- /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
- host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+ if (pdata->pm_caps)
+ host->mmc->pm_caps |= sc->pdata->pm_caps;
/*
* If controller does not have internal clock divider,
@@ -540,10 +495,6 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
}
- /* It supports additional host capabilities if needed */
- if (pdata->host_caps)
- host->mmc->caps |= pdata->host_caps;
-
ret = sdhci_add_host(host);
if (ret) {
dev_err(dev, "sdhci_add_host() failed\n");
@@ -561,24 +512,21 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
return 0;
- err_add_host:
- release_resource(sc->ioarea);
- kfree(sc->ioarea);
-
- err_req_regs:
+err_add_host:
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
if (sc->clk_bus[ptr]) {
clk_disable(sc->clk_bus[ptr]);
clk_put(sc->clk_bus[ptr]);
}
}
-
- err_no_busclks:
+err_no_busclks:
clk_disable(sc->clk_io);
clk_put(sc->clk_io);
- err_io_clk:
- sdhci_free_host(host);
+ kfree(sc);
+err_alloc_host:
+ sdhci_pltfm_free(pdev);
+ dev_err(&pdev->dev, "%s failed %d\n", __func__, ret);
return ret;
}
@@ -587,8 +535,9 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
{
struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
struct sdhci_host *host = platform_get_drvdata(pdev);
- struct sdhci_s3c *sc = sdhci_priv(host);
- int ptr;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_s3c *sc = pltfm_host->priv;
+ int ptr, ret;
if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
@@ -599,9 +548,9 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
if (gpio_is_valid(sc->ext_cd_gpio))
gpio_free(sc->ext_cd_gpio);
- sdhci_remove_host(host, 1);
+ ret = sdhci_pltfm_unregister(pdev);
- for (ptr = 0; ptr < 3; ptr++) {
+ for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
if (sc->clk_bus[ptr]) {
clk_disable(sc->clk_bus[ptr]);
clk_put(sc->clk_bus[ptr]);
@@ -610,54 +559,29 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
clk_disable(sc->clk_io);
clk_put(sc->clk_io);
- iounmap(host->ioaddr);
- release_resource(sc->ioarea);
- kfree(sc->ioarea);
-
- sdhci_free_host(host);
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-
-static int sdhci_s3c_suspend(struct device *dev)
-{
- struct sdhci_host *host = dev_get_drvdata(dev);
-
- return sdhci_suspend_host(host);
-}
-
-static int sdhci_s3c_resume(struct device *dev)
-{
- struct sdhci_host *host = dev_get_drvdata(dev);
-
- return sdhci_resume_host(host);
+ return ret;
}
-static const struct dev_pm_ops sdhci_s3c_pmops = {
- .suspend = sdhci_s3c_suspend,
- .resume = sdhci_s3c_resume,
-};
-
-#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
-
-#else
-#define SDHCI_S3C_PMOPS NULL
-#endif
-
static struct platform_driver sdhci_s3c_driver = {
.probe = sdhci_s3c_probe,
.remove = __devexit_p(sdhci_s3c_remove),
.driver = {
.owner = THIS_MODULE,
.name = "s3c-sdhci",
- .pm = SDHCI_S3C_PMOPS,
},
};
-module_platform_driver(sdhci_s3c_driver);
+static int __init sdhci_s3c_init(void)
+{
+ return platform_driver_register(&sdhci_s3c_driver);
+}
+module_init(sdhci_s3c_init);
+
+static void __exit sdhci_s3c_exit(void)
+{
+ platform_driver_unregister(&sdhci_s3c_driver);
+}
+module_exit(sdhci_s3c_exit);
MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
MODULE_AUTHOR("Ben Dooks, <ben@xxxxxxxxxxxx>");
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
