Re: mmc sdhci mmcblk0: error -110 sending status command, retrying

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 13, 2012 at 12:41 PM, Jeff Chua <jeff.chua.linux@xxxxxxxxx> wrote:
> I ran tests for frequency that works dd out 1G of data from 8MHz to
> 16MHz, and it seems frequency less than 8.4MHz can only transfer at
> rate of 14.3MB/s and above 8.4MHz, speed goes up to 18.3 MB/s. Above
> 17MHz, errors encounters.
>
> hz1  8000000  73.5029 s  14.3 MB/s
> hz2  8000000  73.4740 s  14.3 MB/s
> hz3  8000000  73.3982 s  14.3 MB/s
> hz1  8200000  71.9677 s  14.6 MB/s
> hz2  8200000  73.4936 s  14.3 MB/s
> hz3  8200000  73.3462 s  14.3 MB/s
> hz1  8400000  56.6296 s  18.5 MB/s
> hz2  8400000  56.7616 s  18.5 MB/s
> hz3  8400000  56.7926 s  18.5 MB/s
> hz1  8600000  56.6622 s  18.5 MB/s
> hz2  8600000  56.7201 s  18.5 MB/s
> hz3  8600000  56.6476 s  18.5 MB/s
> hz1  8800000  56.8846 s  18.4 MB/s
> hz2  8800000  56.8226 s  18.5 MB/s
> hz3  8800000  56.7070 s  18.5 MB/s

I've turned on write, and there's no error writing. But speed is
slower than accessing it via USB2 SD card reader. Same SD.

Via SD PCI
8.779 sec  4.04 %cpu
Via USB Reader
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux