Hi Mr.Jeon.
On 02/06/2012 01:19 PM, Namjae Jeon wrote:
> Hi. Jaehoon.
>
> I have questions.
>
> 1. Would you explain why we need on/off function of this CMD23 at runtime ?
Now..operation mode is set at compile time..That means if we use the pre-defined mode,
must always use the pre-defined mode.
Packed-cmd, Data-tag, Context-Id..etc..almost features need to use CMD23.
But in vendor side, some card need to use the open-ended in order to update the firmware code.
(or not)
If we use the cmd23, to update the firmware code maybe need to rebuild..it's worthless.
So i added this patch.
> 2. While frequently reading/writing, Have you tested by being
> enabling/disbling CMD23 using this function ?
Yes..i tested that case..and working well.
> 3. Why is irq disable needed when calling mmc_change_operation_mode ?
> If are we just using spin_lock ?
that value is how we process the request, so i think that need spin_lock_irq().
Well..spin_lock()? i think that..
> 4. When do we use host->pre_defined_op value after setting it ?
Just the setting value..to show the value..any other opinion.
If you have the other approach, i will change.
Best Regards,
Jaehoon Chung
>
> Thanks.
>
> 2012/2/6 Jaehoon Chung <jh80.chung@xxxxxxxxxxx>:
>> This patch is support the sysfs for operation mode.
>>
>> There are two operation modes(open-ended/pre-defined).
>> Now, operation mode is selected only one at the compile time.
>>
>> But using this patch, we can change the operation mode with node at runtime.
>>
>> * pre-defined mode
>> echo 1 > /sys/class/mmc_host/mmc0/pre_defined_op
>> * open-ended mode
>> echo 0 > /sys/class/mmc_host/mmc0/pre_defined_op
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
>> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>> ---
>> Changelog V4:
>> - Add the explanation in Documentation/mmc/mmc-dev-attrs.txt
>> Changelog V3:
>> - Add the mmc_change_operation_mode()
>> Changelog v2:
>> - Add the check point in mmc_cmd23_store()
>> (If host controller didn't support CMD23, need not to change the ops-mode.)
>>
>> Documentation/mmc/mmc-dev-attrs.txt | 16 ++++++++++++++
>> drivers/mmc/card/block.c | 19 +++++++++++++++++
>> drivers/mmc/core/host.c | 39 +++++++++++++++++++++++++++++++++++
>> include/linux/mmc/card.h | 1 +
>> include/linux/mmc/host.h | 3 ++
>> 5 files changed, 78 insertions(+), 0 deletions(-)
>>
>> diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
>> index 22ae844..e7ba3b6 100644
>> --- a/Documentation/mmc/mmc-dev-attrs.txt
>> +++ b/Documentation/mmc/mmc-dev-attrs.txt
>> @@ -74,3 +74,19 @@ This attribute appears only if CONFIG_MMC_CLKGATE is enabled.
>> clkgate_delay Tune the clock gating delay with desired value in milliseconds.
>>
>> echo <desired delay> > /sys/class/mmc_host/mmcX/clkgate_delay
>> +
>> +SD and MMC Operation Mode Attribute
>> +==========================================
>> +
>> +SD and MMC can support the two operation mode.
>> +(Pre-defined(CMD23)/Open-ended operation mode)
>> +
>> +This attribute can change the operation mode at runtime if card is supported the CMD23.
>> +
>> + pre_defined_op Support the pre-defined mode if set 1.
>> +
>> +1) Open-ended mode
>> +echo 0 > /sys/class/mmc_host/mmcX/pre_defined_op
>> +
>> +2) Pre-defined mode
>> +echo 1 > /sys/class/mmc_host/mmcX/pre_defined_op
>> diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
>> index a7c75d8..2c1981c 100644
>> --- a/drivers/mmc/card/block.c
>> +++ b/drivers/mmc/card/block.c
>> @@ -1766,6 +1766,25 @@ static const struct mmc_fixup blk_fixups[] =
>> END_FIXUP
>> };
>>
>> +void mmc_change_operation_mode(struct mmc_card *card, int val)
>> +{
>> + struct mmc_blk_data *md = mmc_get_drvdata(card);
>> +
>> + if (mmc_host_cmd23(card->host)) {
>> + if (mmc_card_mmc(card) ||
>> + (mmc_card_sd(card) &&
>> + card->scr.cmds & SD_SCR_CMD23_SUPPORT)) {
>> + if (val) {
>> + md->flags |= MMC_BLK_CMD23;
>> + card->host->pre_defined_op = val;
>> + } else {
>> + md->flags &= ~MMC_BLK_CMD23;
>> + card->host->pre_defined_op = val;
>> + }
>> + }
>> + }
>> +}
>> +
>> static int mmc_blk_probe(struct mmc_card *card)
>> {
>> struct mmc_blk_data *md, *part_md;
>> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
>> index 30055f2..7dab0dc 100644
>> --- a/drivers/mmc/core/host.c
>> +++ b/drivers/mmc/core/host.c
>> @@ -293,6 +293,41 @@ static inline void mmc_host_clk_sysfs_init(struct mmc_host *host)
>>
>> #endif
>>
>> +static ssize_t mmc_cmd23_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct mmc_host *host = cls_dev_to_mmc_host(dev);
>> + return snprintf(buf, PAGE_SIZE, "%d\n", host->pre_defined_op);
>> +}
>> +
>> +static ssize_t mmc_cmd23_store(struct device *dev,
>> + struct device_attribute *attr, const char *buf, size_t count)
>> +{
>> + struct mmc_host *host = cls_dev_to_mmc_host(dev);
>> + int value;
>> + unsigned long flags;
>> +
>> + if (kstrtoint(buf, 0, &value))
>> + return -EINVAL;
>> +
>> + spin_lock_irqsave(&host->lock, flags);
>> + mmc_change_operation_mode(host->card, value);
>> + spin_unlock_irqrestore(&host->lock, flags);
>> + return count;
>> +}
>> +
>> +static inline void mmc_host_cmd23_sysfs_init(struct mmc_host *host)
>> +{
>> + host->pre_defined_attr.show = mmc_cmd23_show;
>> + host->pre_defined_attr.store = mmc_cmd23_store;
>> + sysfs_attr_init(&host->pre_defined_attr.attr);
>> + host->pre_defined_attr.attr.name = "pre_defined_op";
>> + host->pre_defined_attr.attr.mode = S_IRUGO | S_IWUSR;
>> + if (device_create_file(&host->class_dev, &host->pre_defined_attr))
>> + pr_err("%s: Failed to create pre_defined_op sysfs entry\n",
>> + mmc_hostname(host));
>> +}
>> +
>> /**
>> * mmc_alloc_host - initialise the per-host structure.
>> * @extra: sizeof private data structure
>> @@ -381,6 +416,10 @@ int mmc_add_host(struct mmc_host *host)
>> #endif
>> mmc_host_clk_sysfs_init(host);
>>
>> + if (host->caps & MMC_CAP_CMD23)
>> + host->pre_defined_op = 1;
>> + mmc_host_cmd23_sysfs_init(host);
>> +
>> mmc_start_host(host);
>> register_pm_notifier(&host->pm_notify);
>>
>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>> index 1a1ca71..b36d408 100644
>> --- a/include/linux/mmc/card.h
>> +++ b/include/linux/mmc/card.h
>> @@ -489,5 +489,6 @@ extern void mmc_unregister_driver(struct mmc_driver *);
>>
>> extern void mmc_fixup_device(struct mmc_card *card,
>> const struct mmc_fixup *table);
>> +extern void mmc_change_operation_mode(struct mmc_card *card, int val);
>>
>> #endif /* LINUX_MMC_CARD_H */
>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
>> index 20d7c82..59a30bf 100644
>> --- a/include/linux/mmc/host.h
>> +++ b/include/linux/mmc/host.h
>> @@ -259,6 +259,9 @@ struct mmc_host {
>> MMC_CAP2_HS200_1_2V_SDR)
>> #define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */
>>
>> + struct device_attribute pre_defined_attr;
>> + int pre_defined_op; /* CMD23 should be use or not */
>> +
>> mmc_pm_flag_t pm_caps; /* supported pm features */
>> unsigned int power_notify_type;
>> #define MMC_HOST_PW_NOTIFY_NONE 0
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
