Re: [Bug 39822] SDHC cards no longer recognized on AT91 based board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19:37 Sat 28 Jan     , Douglas Gilbert wrote:
> On 11-10-24 09:54 PM, Douglas Gilbert wrote:
> >On 11-07-28 07:48 PM, Chris Ball wrote:
> >>Hi, thanks for the bug report. Adding linux-mmc@ and some atmel driver
> >>folks to CC.
> >>
> >>On Thu, Jul 28 2011, bugzilla-daemon@xxxxxxxxxxxxxxxxxxx wrote:
> >>>Prior to 3.0.0 the FoxG20 board (Atmel AT91SAM9G20) could boot and use
> >>>both micro SD and SDHC card to contain its root file system. With the
> >>>advent of the 3.0.0 kernel the micro SDHC card is unable to mount the
> >>>root file system.
> >>>
> >>>Comparing the relevant part of dmesg for 2.6.38.6 (and it worked on
> >>>2.6.39):
> >>>...
> >>>Waiting for root device /dev/mmcblk0p2...
> >>>mmc0: host does not support reading read-only switch. assuming write-enable.
> >>>at91_mci at91_mci: Timeout waiting end of packet
> >>>mmc0: new SDHC card at address 1234
> >>>mmcblk0: mmc0:1234 SA04G 3.67 GiB
> >>>mmcblk0: p1 p2 p3
> >>>...
> >>>
> >>>to the same dmesg section for 3.0.0 :
> >>>...
> >>>Waiting for root device /dev/mmcblk0p2...
> >>>mmc0: error -110 whilst initialising SD card
> >>>at91_mci at91_mci: Timeout waiting end of packet
> >>>mmc0: error -110 whilst initialising SD card
> >>>[no further progress]
> >>>
> >>>Non "HC" SD cards work as expected in 3.0.0
> >>
> >>If no-one on the CC list has any ideas, would you be interested in
> >>trying to bisect this change?
> >>
> >>Another possibility would be adding printks before all of the -ETIMEDOUT
> >>lines in core/* and host/at*, in order to see which one you're hitting
> >>(and therefore which operation is causing the initialization to fail).
> >>But a full bisection would be more conclusive.
> >
> >Still broken in lk 3.1.0, same errors in dmesg.
> 
> Still broken in lk 3.2.0, same errors in dmesg.
> 
> The solution (hack) up to lk 3.1.0 has been to take
> linux-2.6.38/drivers/mmc/core/sd.c file and overwrite
> the defective sd.c . That worked in lk 3.0.* and 3.1.* .
> In lk 3.2.0 the old sd.c no longer compiles but
> by adding "#include <linux/stat.h>" is does and thereafter
> that SDHC card can be read again.
> 
> My test system is a FoxG20 card which is based on the
> AT91SAM9G20 SOC. The card's BIOS can read the 4 GB
> microSD (HC) card in all cases; the problem is with
> SDHC cards and all drivers/mmc/core/sd.c from and
> including lk 3.0.0
can you test it on atmel_mci?

at91_mci is deprecated and will be drop soon

Best Regards,
J.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux