If dma is enabled, it'll be cleared when reset all is performed, this can be observed on some platforms, such as P2041 which has a version 2.3 controller, but platform like P4080 which has a version 2.2 controller, does not suffer this, so we will check if the dma is enabled, we should restore it after reset all. Signed-off-by: Shaohui Xie <Shaohui.Xie@xxxxxxxxxxxxx> --- based on http://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git, branch 'for-linus'. drivers/mmc/host/sdhci.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 19ed580..22033c3 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -29,6 +29,7 @@ #include <linux/mmc/host.h> #include "sdhci.h" +#include "sdhci-esdhc.h" #define DRIVER_NAME "sdhci" @@ -176,6 +177,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) { unsigned long timeout; u32 uninitialized_var(ier); + u32 uninitialized_var(dma); if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & @@ -189,6 +191,8 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) if (host->ops->platform_reset_enter) host->ops->platform_reset_enter(host, mask); + dma = sdhci_readl(host, ESDHC_DMA_SYSCTL); + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); if (mask & SDHCI_RESET_ALL) @@ -214,6 +218,9 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET) sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier); + + if ((dma & ESDHC_DMA_SNOOP) && (mask & SDHCI_RESET_ALL)) + sdhci_writel(host, dma, ESDHC_DMA_SYSCTL); } static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); -- 1.6.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
