Re: [PATCH V7 1/2] mmc: core: HS200 mode support for eMMC 4.5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21 December 2011 12:04, Subhash Jadavani <subhashj@xxxxxxxxxxxxxx> wrote:
>
>
>> -----Original Message-----
>> From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc-
>> owner@xxxxxxxxxxxxxxx] On Behalf Of Girish K S
>> Sent: Wednesday, December 21, 2011 9:43 AM
>> To: linux-mmc@xxxxxxxxxxxxxxx
>> Cc: patches@xxxxxxxxxx; linux-samsung-soc@xxxxxxxxxxxxxxx; Girish K S;
>> Chris Ball
>> Subject: [PATCH V7 1/2] mmc: core: HS200 mode support for eMMC 4.5
>>
>> This patch adds the support of the HS200 bus speed for eMMC 4.5
>> devices.
>> The eMMC 4.5 devices have support for 200MHz bus speed. The function
>> prototype of the tuning function is modified to handle the tuning
>> command
>> number which is different in sd and mmc case.
>>
>> cc: Chris Ball <cjb@xxxxxxxxxx>
>> Signed-off-by: Girish K S <girish.shivananjappa@xxxxxxxxxx>
>> ---
>>  drivers/mmc/core/bus.c     |    3 +-
>>  drivers/mmc/core/debugfs.c |    3 +
>>  drivers/mmc/core/mmc.c     |  142
>> +++++++++++++++++++++++++++++++++++++++++---
>>  drivers/mmc/core/sd.c      |    3 +-
>>  drivers/mmc/core/sdio.c    |    4 +-
>>  include/linux/mmc/card.h   |    3 +
>>  include/linux/mmc/mmc.h    |   66 ++++++++++++++++++++-
>
> Looks like you have missed to add change in "include/linux/mmc/host.h" in
> this patch.
yes
>
>
>
>>  7 files changed, 211 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
>> index f8a228a..5d011a3 100644
>> --- a/drivers/mmc/core/bus.c
>> +++ b/drivers/mmc/core/bus.c
>> @@ -303,10 +303,11 @@ int mmc_add_card(struct mmc_card *card)
>>                       mmc_card_ddr_mode(card) ? "DDR " : "",
>>                       type);
>>       } else {
>> -             printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
>> +             pr_info("%s: new %s%s%s%s card at address %04x\n",
>>                       mmc_hostname(card->host),
>>                       mmc_card_uhs(card) ? "ultra high speed " :
>>                       (mmc_card_highspeed(card) ? "high speed " : ""),
>> +                     (mmc_card_hs200(card) ? "HS200 " : ""),
>>                       mmc_card_ddr_mode(card) ? "DDR " : "",
>>                       type, card->rca);
>>       }
>> diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
>> index 027615d..9ab5b17 100644
>> --- a/drivers/mmc/core/debugfs.c
>> +++ b/drivers/mmc/core/debugfs.c
>> @@ -135,6 +135,9 @@ static int mmc_ios_show(struct seq_file *s, void
>> *data)
>>       case MMC_TIMING_UHS_DDR50:
>>               str = "sd uhs DDR50";
>>               break;
>> +     case MMC_TIMING_MMC_HS200:
>> +             str = "mmc high-speed SDR200";
>> +             break;
>>       default:
>>               str = "invalid";
>>               break;
>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>> index f0a9f1f..4de3416 100644
>> --- a/drivers/mmc/core/mmc.c
>> +++ b/drivers/mmc/core/mmc.c
>> @@ -286,6 +286,27 @@ static int mmc_read_ext_csd(struct mmc_card *card,
>> u8 *ext_csd)
>>       }
>>       card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
>>       switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
>> +     case EXT_CSD_CARD_TYPE_SDR_ALL:
>> +     case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V:
>> +     case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V:
>> +     case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52:
>> +             card->ext_csd.hs_max_dtr = 200000000;
>> +             card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200;
>> +             break;
>> +     case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52:
>> +             card->ext_csd.hs_max_dtr = 200000000;
>> +             card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V;
>> +             break;
>> +     case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V:
>> +     case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52:
>> +             card->ext_csd.hs_max_dtr = 200000000;
>> +             card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V;
>> +             break;
>>       case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
>>            EXT_CSD_CARD_TYPE_26:
>>               card->ext_csd.hs_max_dtr = 52000000;
>> @@ -700,6 +721,58 @@ static int mmc_select_powerclass(struct mmc_card
>> *card,
>>  }
>>
>>  /*
>> + * Selects the desired buswidth and switch to the HS200 mode
>> + * if bus width set without error
>> + */
>> +static int mmc_select_hs200(struct mmc_card *card)
>> +{
>> +     int err = 0;
>> +     struct mmc_host *host;
>> +     u32 bus_width = MMC_BUS_WIDTH_4;
>> +
>> +     BUG_ON(!card);
>> +
>> +     host = card->host;
>> +
>> +     if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V)
>> +             && (host->caps2 & MMC_CAP2_HS200_1_2V_SDR))
>> +             err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120,
>> 0);
>> +
>> +     /*
>> +      * Host is capable of 8bit transfer, then switch
>> +      * the device to work in 8bit transfer mode. If the
>> +      * mmc switch command returns error then switch to
>> +      * 4bit transfer mode. On success set the corresponding
>> +      * bus width on the host.
>> +      */
>> +     if (!err && host->caps & MMC_CAP_8_BIT_DATA) {
>> +             err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> +                              EXT_CSD_BUS_WIDTH,
>> +                              EXT_CSD_BUS_WIDTH_8,
>> +                              card->ext_csd.generic_cmd6_time);
>> +             bus_width = MMC_BUS_WIDTH_8;
>> +     }
>> +
>> +     /* If the 8bit mode fails switch to 4 bit mode */
>> +     if (err) {
>> +             err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> +                              EXT_CSD_BUS_WIDTH,
>> +                              EXT_CSD_BUS_WIDTH_4,
>> +                              card->ext_csd.generic_cmd6_time);
>> +             bus_width = MMC_BUS_WIDTH_4;
>> +     }
>> +
>> +     /* switch to HS200 mode if bus width set successfully */
>> +     if (!err) {
>> +             mmc_set_bus_width(card->host, bus_width);
>> +             err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> +                              EXT_CSD_HS_TIMING, 2, 0);
>> +     }
>> +
>> +     return err;
>> +}
>> +
>> +/*
>>   * Handle the detection and initialisation of a card.
>>   *
>>   * In the case of a resume, "oldcard" will contain the card
>> @@ -905,11 +978,15 @@ static int mmc_init_card(struct mmc_host *host,
>> u32 ocr,
>>       /*
>>        * Activate high speed (if supported)
>>        */
>> -     if ((card->ext_csd.hs_max_dtr != 0) &&
>> -             (host->caps & MMC_CAP_MMC_HIGHSPEED)) {
>> -             err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> -                              EXT_CSD_HS_TIMING, 1,
>> -                              card->ext_csd.generic_cmd6_time);
>> +     if (card->ext_csd.hs_max_dtr != 0) {
>> +             err = 0;
>> +             if ((card->ext_csd.hs_max_dtr > 52000000) &&
>> +                 (host->caps2 & MMC_CAP2_HS200))
>> +                     err = mmc_select_hs200(card);
>> +             else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
>> +                     err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>> +                                      EXT_CSD_HS_TIMING, 1, 0);
>> +
>>               if (err && err != -EBADMSG)
>>                       goto free_card;
>>
>> @@ -918,8 +995,15 @@ static int mmc_init_card(struct mmc_host *host,
>> u32 ocr,
>>                              mmc_hostname(card->host));
>>                       err = 0;
>>               } else {
>> -                     mmc_card_set_highspeed(card);
>> -                     mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
>> +                     if ((card->ext_csd.hs_max_dtr > 52000000) &&
>> +                         (host->caps2 & MMC_CAP2_HS200)) {
>> +                             mmc_card_set_hs200(card);
>> +                             mmc_set_timing(card->host,
>> +                                            MMC_TIMING_MMC_HS200);
>> +                     } else {
>> +                             mmc_card_set_highspeed(card);
>> +                             mmc_set_timing(card->host,
> MMC_TIMING_MMC_HS);
>> +                     }
>>               }
>>       }
>>
>> @@ -944,7 +1028,7 @@ static int mmc_init_card(struct mmc_host *host,
>> u32 ocr,
>>        */
>>       max_dtr = (unsigned int)-1;
>>
>> -     if (mmc_card_highspeed(card)) {
>> +     if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
>>               if (max_dtr > card->ext_csd.hs_max_dtr)
>>                       max_dtr = card->ext_csd.hs_max_dtr;
>>       } else if (max_dtr > card->csd.max_dtr) {
>> @@ -970,9 +1054,49 @@ static int mmc_init_card(struct mmc_host *host,
>> u32 ocr,
>>       }
>>
>>       /*
>> +      * Indicate HS200 SDR mode (if supported).
>> +      */
>> +     if (mmc_card_hs200(card)) {
>> +             u32 ext_csd_bits;
>> +             u32 bus_width = card->host->ios.bus_width;
>> +
>> +             /*
>> +              * For devices supporting HS200 mode, the bus width has
>> +              * to be set before executing the tuning function. If
>> +              * set before tuning, then device will respond with CRC
>> +              * errors for responses on CMD line. So for HS200 the
>> +              * sequence will be
>> +              * 1. set bus width 4bit / 8 bit (1 bit not supported)
>> +              * 2. switch to HS200 mode
>> +              * 3. set the clock to > 52Mhz <=200MHz and
>> +              * 4. execute tuning for HS200
>> +              */
>> +             if ((host->caps2 & MMC_CAP2_HS200) &&
>> +                 card->host->ops->execute_tuning)
>> +                     err = card->host->ops->execute_tuning(card->host,
>> +                                     MMC_SEND_TUNING_BLOCK_HS200);
>> +             if (err) {
>> +                     pr_warning("tuning execution failed\n");
>> +                     goto err;
>> +             }
>> +
>> +             ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
>> +                                     EXT_CSD_BUS_WIDTH_8 :
>> +                                     EXT_CSD_BUS_WIDTH_4;
>> +             err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
>> +             if (err) {
>> +                     pr_err("%s: power class selection to bus width"
>> +                            "%d failed\n", mmc_hostname(card->host),
>> +                            1 << bus_width);
>> +                     goto err;
>> +             }
>> +     }
>> +
>> +     /*
>>        * Activate wide bus and DDR (if supported).
>>        */
>> -     if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
>> +     if (!mmc_card_hs200(card) &&
>> +         (card->csd.mmca_vsn >= CSD_SPEC_VER_3) &&
>>           (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
>>               static unsigned ext_csd_bits[][2] = {
>>                       { EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
>> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
>> index 6f27d35..a775131 100644
>> --- a/drivers/mmc/core/sd.c
>> +++ b/drivers/mmc/core/sd.c
>> @@ -661,7 +661,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card
>> *card)
>>
>>       /* SPI mode doesn't define CMD19 */
>>       if (!mmc_host_is_spi(card->host) && card->host->ops-
>> >execute_tuning)
>> -             err = card->host->ops->execute_tuning(card->host);
>> +             err = card->host->ops->execute_tuning(card->host,       \
>> +
> MMC_SEND_TUNING_BLOCK);
>>
>>  out:
>>       kfree(status);
>> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
>> index b77f770..bd7bacc 100644
>> --- a/drivers/mmc/core/sdio.c
>> +++ b/drivers/mmc/core/sdio.c
>> @@ -14,6 +14,7 @@
>>
>>  #include <linux/mmc/host.h>
>>  #include <linux/mmc/card.h>
>> +#include <linux/mmc/mmc.h>
>>  #include <linux/mmc/sdio.h>
>>  #include <linux/mmc/sdio_func.h>
>>  #include <linux/mmc/sdio_ids.h>
>> @@ -556,7 +557,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card
>> *card)
>>
>>       /* Initialize and start re-tuning timer */
>>       if (!mmc_host_is_spi(card->host) && card->host->ops-
>> >execute_tuning)
>> -             err = card->host->ops->execute_tuning(card->host);
>> +             err = card->host->ops->execute_tuning(card->host,
>> +
> MMC_SEND_TUNING_BLOCK);
>>
>>  out:
>>
>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>> index 9478a6b..9f22ba5 100644
>> --- a/include/linux/mmc/card.h
>> +++ b/include/linux/mmc/card.h
>> @@ -216,6 +216,7 @@ struct mmc_card {
>>  #define MMC_STATE_ULTRAHIGHSPEED (1<<5)              /* card is in ultra
>> high speed mode */
>>  #define MMC_CARD_SDXC                (1<<6)          /* card is SDXC */
>>  #define MMC_CARD_REMOVED     (1<<7)          /* card has been
>> removed */
>> +#define MMC_STATE_HIGHSPEED_200      (1<<8)          /* card is in
>> HS200 mode */
>>       unsigned int            quirks;         /* card quirks */
>>  #define MMC_QUIRK_LENIENT_FN0        (1<<0)          /* allow SDIO FN0
>> writes outside of the VS CCCR range */
>>  #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func-
>> >cur_blksize */
>> @@ -374,6 +375,7 @@ static inline void __maybe_unused
>> remove_quirk(struct mmc_card *card, int data)
>>  #define mmc_card_present(c)  ((c)->state & MMC_STATE_PRESENT)
>>  #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
>>  #define mmc_card_highspeed(c)        ((c)->state & MMC_STATE_HIGHSPEED)
>> +#define mmc_card_hs200(c)    ((c)->state & MMC_STATE_HIGHSPEED_200)
>>  #define mmc_card_blockaddr(c)        ((c)->state & MMC_STATE_BLOCKADDR)
>>  #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR)
>>  #define mmc_card_uhs(c)              ((c)->state &
>> MMC_STATE_ULTRAHIGHSPEED)
>> @@ -384,6 +386,7 @@ static inline void __maybe_unused
>> remove_quirk(struct mmc_card *card, int data)
>>  #define mmc_card_set_present(c)      ((c)->state |= MMC_STATE_PRESENT)
>>  #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
>>  #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
>> +#define mmc_card_set_hs200(c)        ((c)->state |=
>> MMC_STATE_HIGHSPEED_200)
>>  #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
>>  #define mmc_card_set_ddr_mode(c) ((c)->state |=
>> MMC_STATE_HIGHSPEED_DDR)
>>  #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
>> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
>> index 665548e..2c8cc69 100644
>> --- a/include/linux/mmc/mmc.h
>> +++ b/include/linux/mmc/mmc.h
>> @@ -51,6 +51,7 @@
>>  #define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1
>> */
>>  #define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1
>> */
>>  #define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1
>> */
>> +#define MMC_SEND_TUNING_BLOCK_HS200  21      /* adtc R1  */
>>
>>    /* class 3 */
>>  #define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1
>> */
>> @@ -339,13 +340,76 @@ struct _mmc_csd {
>>
>>  #define EXT_CSD_CARD_TYPE_26 (1<<0)  /* Card can run at 26MHz */
>>  #define EXT_CSD_CARD_TYPE_52 (1<<1)  /* Card can run at 52MHz */
>> -#define EXT_CSD_CARD_TYPE_MASK       0xF     /* Mask out reserved bits */
>> +#define EXT_CSD_CARD_TYPE_MASK       0x3F    /* Mask out reserved bits */
>>  #define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz
>> */
>>                                            /* DDR mode @1.8V or 3V I/O */
>>  #define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz
>> */
>>                                            /* DDR mode @1.2V I/O */
>>  #define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
>>                                       | EXT_CSD_CARD_TYPE_DDR_1_2V)
>> +#define EXT_CSD_CARD_TYPE_SDR_1_8V   (1<<4)  /* Card can run at
>> 200MHz */
>> +#define EXT_CSD_CARD_TYPE_SDR_1_2V   (1<<5)  /* Card can run at
>> 200MHz */
>> +                                             /* SDR mode @1.2V I/O */
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_200    (EXT_CSD_CARD_TYPE_SDR_1_8V     \
>> +                                     | EXT_CSD_CARD_TYPE_SDR_1_2V)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_ALL    (EXT_CSD_CARD_TYPE_SDR_200      \
>> +                                     | EXT_CSD_CARD_TYPE_52          \
>> +                                     | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define      EXT_CSD_CARD_TYPE_SDR_1_2V_ALL
>>       (EXT_CSD_CARD_TYPE_SDR_1_2V     \
>> +                                     | EXT_CSD_CARD_TYPE_52          \
>> +                                     | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define      EXT_CSD_CARD_TYPE_SDR_1_8V_ALL
>>       (EXT_CSD_CARD_TYPE_SDR_1_8V     \
>> +                                     | EXT_CSD_CARD_TYPE_52          \
>> +                                     | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V
>>       (EXT_CSD_CARD_TYPE_SDR_1_2V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_8V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V
>>       (EXT_CSD_CARD_TYPE_SDR_1_8V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_8V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V
>>       (EXT_CSD_CARD_TYPE_SDR_1_2V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_2V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V
>>       (EXT_CSD_CARD_TYPE_SDR_1_8V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_2V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52
>>       (EXT_CSD_CARD_TYPE_SDR_1_2V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52
>>       (EXT_CSD_CARD_TYPE_SDR_1_8V  \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V
>>       (EXT_CSD_CARD_TYPE_SDR_200   \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_8V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V
>>       (EXT_CSD_CARD_TYPE_SDR_200   \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_1_2V
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>> +
>> +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52     (EXT_CSD_CARD_TYPE_SDR_200
>> \
>> +                                             | EXT_CSD_CARD_TYPE_DDR_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_52
> \
>> +                                             | EXT_CSD_CARD_TYPE_26)
>>
>>  #define EXT_CSD_BUS_WIDTH_1  0       /* Card is in 1 bit mode */
>>  #define EXT_CSD_BUS_WIDTH_4  1       /* Card is in 4 bit mode */
>> --
>> 1.7.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux