Re: [PATCH] mmc: core: Fix voltage select in DDR mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Chris,
can you add this in your pull request. Its been Acked by the authors
for the correction

regards
Girish K S

On 19 December 2011 22:49, Philip Rakity <prakity@xxxxxxxxxxx> wrote:
>
> On Dec 15, 2011, at 9:06 AM, Subhash Jadavani wrote:
>
>>
>>
>>> -----Original Message-----
>>> From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc-
>>> owner@xxxxxxxxxxxxxxx] On Behalf Of Girish K S
>>> Sent: Thursday, December 15, 2011 5:28 PM
>>> To: linux-mmc@xxxxxxxxxxxxxxx
>>> Cc: patches@xxxxxxxxxx; linux-samsung-soc@xxxxxxxxxxxxxxx; Girish K S;
>>> Philip Rakity; Arindam Nath; Chris Ball
>>> Subject: [PATCH] mmc: core: Fix voltage select in DDR mode
>>>
>>> This patch fixes the wrong comparison before setting the interface
>>> voltage in DDR mode.
>>>
>>> The assignment to the variable ddr before comaprison is either
>>> ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the
>>> comparison
>>> is done wth the extended csd value if (ddr ==
>>> EXT_CSD_CARD_TYPE_DDR_1_2V)
>>>
>>> cc: Philip Rakity <prakity@xxxxxxxxxxx>
>>> cc: Arindam Nath <arindam.nath@xxxxxxx>
>>> cc: Chris Ball <cjb@xxxxxxxxxx>
>>> Signed-off-by: Girish K S <girish.shivananjappa@xxxxxxxxxx>
>>> ---
>>> drivers/mmc/core/mmc.c |    2 +-
>>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>>> index 006e932..f0a9f1f 100644
>>> --- a/drivers/mmc/core/mmc.c
>>> +++ b/drivers/mmc/core/mmc.c
>>> @@ -1058,7 +1058,7 @@ static int mmc_init_card(struct mmc_host *host,
>>> u32 ocr,
>>>                       *
>>>                       * WARNING: eMMC rules are NOT the same as SD DDR
>>>                       */
>>> -                    if (ddr == EXT_CSD_CARD_TYPE_DDR_1_2V) {
>>> +                    if (ddr == MMC_1_2V_DDR_MODE) {
>>
>> Looks fine.
>> Acked-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
>
> Acked-by: Philip Rakity <prakity@xxxxxxxxxxx>
>
> NOTE:  standard sdhci controller (version 3.0) does not support 1.2v signaling.
>
>>
>>>                              err = mmc_set_signal_voltage(host,
>>>                                      MMC_SIGNAL_VOLTAGE_120, 0);
>>>                              if (err)
>>> --
>>> 1.7.1
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux