Re: [PATCH] mmc: core: Add packed command for eMMC4.5 device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 10/27/2011 4:24 PM, Seungwon Jeon wrote:

+static int mmc_blk_packed_err_check(struct mmc_card *card,
+			     struct mmc_async_req *areq)
+{
+	struct mmc_queue_req *mq_mrq = container_of(areq, struct mmc_queue_req,
+						    mmc_active);
+	int err, check, status;
+	u8 ext_csd[512];
+
+	check = mmc_blk_err_check(card, areq);
+
+	if (check == MMC_BLK_SUCCESS)
+		return check;
+
+	if (check == MMC_BLK_PARTIAL) {
+		err = get_card_status(card,&status, 0);
+		if (err)
+			return MMC_BLK_ABORT;
+
+		if (status&  R1_EXP_EVENT) {
+			err = mmc_send_ext_csd(card, ext_csd);
+			if (err)
+				return MMC_BLK_ABORT;
+
+			if ((ext_csd[EXT_CSD_EXP_EVENTS_STATUS + 0]&
+						EXT_CSD_PACKED_FAILURE)&&
+					(ext_csd[EXT_CSD_PACKED_CMD_STATUS]&
+					 EXT_CSD_PACKED_GENERIC_ERROR)) {
+				if (ext_csd[EXT_CSD_PACKED_CMD_STATUS]&
+						EXT_CSD_PACKED_INDEXED_ERROR) {
+					/* Make be 0-based */
+					mq_mrq->packed_fail_idx =
+						ext_csd[EXT_CSD_PACKED_FAILURE_INDEX] - 1;
+					return MMC_BLK_PARTIAL;
+				} else {
+					return MMC_BLK_RETRY;
+				}
+			}
+		} else {
+			return MMC_BLK_RETRY;
+		}
+	}
+
+	if (check != MMC_BLK_ABORT)
+		return MMC_BLK_RETRY;
+	else
+		return MMC_BLK_ABORT;

The current code does not return other errors (MMC_BLK_CMD_ERR, MMC_BLK_ECC_ERR and MMC_BLK_DATA_ERR) returned by mmc_blk_err_check(). Why not return check here?

+}
+
  static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
  			       struct mmc_card *card,
  			       int disable_multi,
@@ -1126,6 +1187,207 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
  	mmc_queue_bounce_pre(mqrq);
  }

+static u8 mmc_blk_chk_packable(struct mmc_queue *mq, struct request *req)
+{
+	struct request_queue *q = mq->queue;
+	struct mmc_card *card = mq->card;
+	struct request *cur = req, *next = NULL;
+	struct mmc_blk_data *md = mq->data;
+	bool en_rel_wr = card->ext_csd.rel_param&  EXT_CSD_WR_REL_PARAM_EN;
+	unsigned int req_sectors = 0, phys_segments = 0;
+	unsigned int max_blk_count, max_phys_segs;
+	u8 max_packed_rw = 0;
+	u8 reqs = 0;
+
+	if (!(md->flags&  MMC_BLK_CMD23)&&
+			!card->ext_csd.packed_event_en)
+		goto no_packed;
+
+	if (rq_data_dir(cur) == READ)
+		max_packed_rw = card->ext_csd.max_packed_reads;
+	else
+		max_packed_rw = card->ext_csd.max_packed_writes;
+
+	if (max_packed_rw == 0)
+		goto no_packed;
+
+	if (mmc_req_rel_wr(cur)&&
+			(md->flags&  MMC_BLK_REL_WR)&&
+			!en_rel_wr) {
+		goto no_packed;
+	}
+
+	max_blk_count = min(card->host->max_blk_count,
+			card->host->max_req_size>>  9);
+	max_phys_segs = queue_max_segments(q);
+	req_sectors += blk_rq_sectors(cur);
+	phys_segments += req->nr_phys_segments;
+
+	if (rq_data_dir(cur) == WRITE) {
+		req_sectors++;
+		phys_segments++;
+	}
+
+	while (reqs<  max_packed_rw - 1) {

What if the number of requests exceeds the packed header size defined?

+		next = blk_fetch_request(q);
+		if (!next)
+			break;
+
+		if (rq_data_dir(cur) != rq_data_dir(next)) {
+			blk_requeue_request(q, next);
+			break;
+		}
+
+		if (mmc_req_rel_wr(next)&&
+				(md->flags&  MMC_BLK_REL_WR)&&
+				!en_rel_wr) {
+			blk_requeue_request(q, next);
+			break;
+		}
+
+		req_sectors += blk_rq_sectors(next);
+		if (req_sectors>  max_blk_count) {
+			blk_requeue_request(q, next);
+			break;
+		}
+
+		phys_segments +=  next->nr_phys_segments;
+		if (phys_segments>  max_phys_segs) {
+			blk_requeue_request(q, next);
+			break;
+		}
+
+		list_add_tail(&next->queuelist,&mq->mqrq_cur->packed_list);
+		cur = next;
+		reqs++;
+	}
+
+	if (reqs>  0) {
+		list_add(&req->queuelist,&mq->mqrq_cur->packed_list);
+		return (reqs + 1);
+	}
+
+no_packed:
+	mq->mqrq_cur->packed_cmd = MMC_PACKED_NONE;
+	return reqs;
+}
+

  static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
  			   struct mmc_blk_request *brq, struct request *req,
  			   int ret)
@@ -1163,15 +1425,33 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
  	int ret = 1, disable_multi = 0, retry = 0, type;
  	enum mmc_blk_status status;
  	struct mmc_queue_req *mq_rq;
-	struct request *req;
+	struct request *req, *prq;
  	struct mmc_async_req *areq;
+	u8 reqs = 0;

  	if (!rqc&&  !mq->mqrq_prev->req)
  		return 0;

+	if (rqc)
+		reqs = mmc_blk_chk_packable(mq, rqc);
+
  	do {
  		if (rqc) {
-			mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
+			if (reqs>= 2) {
+				mmc_blk_packed_hdr_wrq_prep(mq->mqrq_cur, card, mq, reqs);
+				if (rq_data_dir(rqc) == READ) {
+					areq =&mq->mqrq_cur->mmc_active;
+					mmc_wait_for_req(card->host, areq->mrq);
+					status = mmc_blk_packed_err_check(card, areq);
+					if (status == MMC_BLK_SUCCESS) {
+						mmc_blk_packed_rrq_prep(mq->mqrq_cur, card, mq);
+					} else {
+						goto check_status;
+					}
+				}
+			} else {
+				mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);

We must use disable_multi variable instead of directly calling this function with 0 value because there are some cases where disable_multi is set to 1 (for example, it is set for error case MMC_BLK_ECC_ERR).

+			}
  			areq =&mq->mqrq_cur->mmc_active;
  		} else
  			areq = NULL;
@@ -1179,6 +1459,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
  		if (!areq)
  			return 0;

+check_status:
  		mq_rq = container_of(areq, struct mmc_queue_req, mmc_active);
  		brq =&mq_rq->brq;
  		req = mq_rq->req;
@@ -1192,10 +1473,32 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
  			 * A block was successfully transferred.
  			 */
  			mmc_blk_reset_success(md, type);
-			spin_lock_irq(&md->lock);
-			ret = __blk_end_request(req, 0,
+
+			if (mq_rq->packed_cmd != MMC_PACKED_NONE) {
+				int idx = mq_rq->packed_fail_idx, i = 0;
+				while (!list_empty(&mq_rq->packed_list)) {
+					prq = list_entry_rq(mq_rq->packed_list.next);
+					if (idx == i) {
+						/* retry from error index */
+						reqs -= idx;
+						mq_rq->req = prq;
+						ret = 1;
+						break;
+					}
+					list_del_init(&prq->queuelist);
+					spin_lock_irq(&md->lock);
+					ret = __blk_end_request(prq, 0, blk_rq_bytes(prq));
+					spin_unlock_irq(&md->lock);
+					i++;
+				}
+				break;
+			} else {
+				spin_lock_irq(&md->lock);
+				ret = __blk_end_request(req, 0,
  						brq->data.bytes_xfered);
-			spin_unlock_irq(&md->lock);
+				spin_unlock_irq(&md->lock);
+			}
+
  			/*
  			 * If the blk_end_request function returns non-zero even
  			 * though all data has been transferred and no errors
@@ -1254,7 +1557,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
  			break;
  		}

-		if (ret) {
+		if (ret&&  (mq_rq->packed_cmd == MMC_PACKED_NONE)) {
  			/*
  			 * In case of a incomplete request
  			 * prepare it again and resend.
@@ -1267,13 +1570,37 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
  	return 1;

   cmd_abort:
-	spin_lock_irq(&md->lock);
-	while (ret)
-		ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
-	spin_unlock_irq(&md->lock);
+	if (mq_rq->packed_cmd != MMC_PACKED_NONE) {
+		spin_lock_irq(&md->lock);
+		while (ret)
+			ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req));
+		spin_unlock_irq(&md->lock);
+	} else {
+		while (!list_empty(&mq_rq->packed_list)) {
+			prq = list_entry_rq(mq_rq->packed_list.next);
+			list_del_init(&prq->queuelist);
+			spin_lock_irq(&md->lock);
+			__blk_end_request(prq, -EIO, blk_rq_bytes(prq));
+			spin_unlock_irq(&md->lock);
+		}
+	}

   start_new_req:
  	if (rqc) {
+		/*
+		 * If current request is packed, it need to put back.
+		 */
+		if (mq->mqrq_cur->packed_cmd != MMC_PACKED_NONE) {
+			while (!list_empty(&mq->mqrq_cur->packed_list)) {
+				prq = list_entry_rq(mq->mqrq_cur->packed_list.prev);
+				if (prq->queuelist.prev !=&mq->mqrq_cur->packed_list) {
+					list_del_init(&prq->queuelist);
+					blk_requeue_request(mq->queue, prq);
+				} else {
+					list_del_init(&prq->queuelist);
+				}
+			}
+		}
  		mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);

We must use disable_multi variable instead of directly calling this function with 0 value because there are some cases where disable_multi is set to 1.

  		mmc_start_req(card->host,&mq->mqrq_cur->mmc_active, NULL);

I think these two statements must come under else part of above if condition. Please check.

Thanks,
Sahitya.
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum.


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux