On Fri, Nov 4, 2011 at 5:39 PM, Tanmay Upadhyay
<tanmay.upadhyay@xxxxxxxxxxxxxx> wrote:
> v2 - clock register for SDHCI are not common across all MMP SoCs.
> So, move PXA168 implementation to pxa168.c
>
> Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@xxxxxxxxxxxxxx>
> ---
> arch/arm/mach-mmp/clock.c | 1 +
> arch/arm/mach-mmp/clock.h | 1 +
> arch/arm/mach-mmp/include/mach/pxa168.h | 20 +++++++++++++
> arch/arm/mach-mmp/pxa168.c | 46 +++++++++++++++++++++++++++++++
> 4 files changed, 68 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
> index 7c6f95f..eefefea 100644
> --- a/arch/arm/mach-mmp/clock.c
> +++ b/arch/arm/mach-mmp/clock.c
> @@ -14,6 +14,7 @@
> #include <linux/io.h>
>
> #include <mach/regs-apbc.h>
> +#include <mach/regs-apmu.h>
> #include "clock.h"
>
> static void apbc_clk_enable(struct clk *clk)
> diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
> index 3143e99..1243e4d 100644
> --- a/arch/arm/mach-mmp/clock.h
> +++ b/arch/arm/mach-mmp/clock.h
> @@ -27,6 +27,7 @@ struct clk {
>
> extern struct clkops apbc_clk_ops;
> extern struct clkops apmu_clk_ops;
> +extern struct clkops sdh_clk_ops;
>
> #define APBC_CLK(_name, _reg, _fnclksel, _rate) \
> struct clk clk_##_name = { \
> diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
> index 7f00584..390a550 100644
> --- a/arch/arm/mach-mmp/include/mach/pxa168.h
> +++ b/arch/arm/mach-mmp/include/mach/pxa168.h
> @@ -15,6 +15,7 @@ extern void pxa168_clear_keypad_wakeup(void);
> #include <plat/pxa27x_keypad.h>
> #include <mach/cputype.h>
> #include <linux/pxa168_eth.h>
> +#include <linux/platform_data/pxa_sdhci.h>
>
> extern struct pxa_device_desc pxa168_device_uart1;
> extern struct pxa_device_desc pxa168_device_uart2;
> @@ -34,6 +35,10 @@ extern struct pxa_device_desc pxa168_device_nand;
> extern struct pxa_device_desc pxa168_device_fb;
> extern struct pxa_device_desc pxa168_device_keypad;
> extern struct pxa_device_desc pxa168_device_eth;
> +extern struct pxa_device_desc pxa168_device_sdh0;
> +extern struct pxa_device_desc pxa168_device_sdh1;
> +extern struct pxa_device_desc pxa168_device_sdh2;
> +extern struct pxa_device_desc pxa168_device_sdh3;
>
> static inline int pxa168_add_uart(int id)
> {
> @@ -125,4 +130,19 @@ static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)
> {
> return pxa_register_device(&pxa168_device_eth, data, sizeof(*data));
> }
> +
> +static inline int pxa168_add_sdh(int id, struct sdhci_pxa_platdata *data)
> +{
> + struct pxa_device_desc *d = NULL;
> +
> + switch (id) {
> + case 0: d = &pxa168_device_sdh0; break;
> + case 1: d = &pxa168_device_sdh1; break;
> + case 2: d = &pxa168_device_sdh2; break;
> + case 3: d = &pxa168_device_sdh3; break;
> + default:
> + return -EINVAL;
> + }
> + return pxa_register_device(d, data, sizeof(*data));
> +}
> #endif /* __ASM_MACH_PXA168_H */
> diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
> index 0156f53..868605d 100644
> --- a/arch/arm/mach-mmp/pxa168.c
> +++ b/arch/arm/mach-mmp/pxa168.c
> @@ -43,6 +43,14 @@ static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
>
> #define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
>
> +/* Offset defined in arch/arm/mach-mmp/include/mach/regs-apmu.h are for MMP2
> + * PXA168 has different offset */
> +#undef APMU_SDH2
> +#undef APMU_SDH3
> +
> +#define APMU_SDH2 APMU_REG(0xe0)
> +#define APMU_SDH3 APMU_REG(0xe4)
> +
> static void __init pxa168_init_gpio(void)
> {
> int i;
> @@ -63,6 +71,31 @@ void __init pxa168_init_irq(void)
> pxa168_init_gpio();
> }
>
> +static void sdh_clk_enable(struct clk *clk)
> +{
> + unsigned long clk_reg_offset = (unsigned long) clk->clk_rst;
> +
> + /* Can't see any clean way to do this: Bits 3 & 0 in registers
> + * for host 0 & 2 should be set for host 1 & 3 also */
> + if (clk_reg_offset == APMU_SDH0 || clk_reg_offset == APMU_SDH1)
> + __raw_writel(__raw_readl(APMU_SDH0) | 0x9, APMU_SDH0);
> + if (clk_reg_offset == APMU_SDH2 || clk_reg_offset == APMU_SDH3)
> + __raw_writel(__raw_readl(APMU_SDH2) | 0x9, APMU_SDH2);
> +
> + __raw_writel(__raw_readl(clk->clk_rst) | clk->enable_val, clk->clk_rst);
> +}
> +
> +static void sdh_clk_disable(struct clk *clk)
> +{
> + __raw_writel(__raw_readl(clk->clk_rst) & ~(clk->enable_val),
> + clk->clk_rst);
> +}
> +
> +struct clkops sdh_clk_ops = {
> + .enable = sdh_clk_enable,
> + .disable = sdh_clk_disable,
> +};
> +
> /* APB peripheral clocks */
> static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
> static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
> @@ -84,6 +117,11 @@ static APMU_CLK(nand, NAND, 0x19b, 156000000);
> static APMU_CLK(lcd, LCD, 0x7f, 312000000);
> static APMU_CLK(eth, ETH, 0x09, 0);
>
> +static APMU_CLK_OPS(sdh0, SDH0, 0x12, 48000000, &sdh_clk_ops);
> +static APMU_CLK_OPS(sdh1, SDH1, 0x12, 48000000, &sdh_clk_ops);
> +static APMU_CLK_OPS(sdh2, SDH2, 0x12, 48000000, &sdh_clk_ops);
> +static APMU_CLK_OPS(sdh3, SDH3, 0x12, 48000000, &sdh_clk_ops);
> +
> /* device and clock bindings */
> static struct clk_lookup pxa168_clkregs[] = {
> INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
> @@ -104,6 +142,10 @@ static struct clk_lookup pxa168_clkregs[] = {
> INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
> INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
> INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
> + INIT_CLKREG(&clk_sdh0, "sdhci-pxav1.0", "PXA-SDHCLK"),
> + INIT_CLKREG(&clk_sdh1, "sdhci-pxav1.1", "PXA-SDHCLK"),
> + INIT_CLKREG(&clk_sdh2, "sdhci-pxav1.2", "PXA-SDHCLK"),
> + INIT_CLKREG(&clk_sdh3, "sdhci-pxav1.3", "PXA-SDHCLK"),
> };
>
> static int __init pxa168_init(void)
> @@ -169,3 +211,7 @@ PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
> PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
> PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
> PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
> +PXA168_DEVICE(sdh0, "sdhci-pxav1", 0, SDH1, 0xd4280000, 0x100);
> +PXA168_DEVICE(sdh1, "sdhci-pxav1", 1, SDH1, 0xd4281000, 0x100);
> +PXA168_DEVICE(sdh2, "sdhci-pxav1", 2, SDH2, 0xd427e000, 0x100);
> +PXA168_DEVICE(sdh3, "sdhci-pxav1", 3, SDH2, 0xd427f000, 0x100);
Sorry Tanmay for late response.
The problem is that I didn't seem to find sdhci-pxav1 though in drivers/mmc.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
