Hi Adrian, On Wed, Nov 9, 2011 at 10:34 AM, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote: > On 09/11/11 06:31, Sujit Reddy Thumma wrote: >> Kill block requests when the host knows that the card is >> removed from the slot and is sure that subsequent requests >> are bound to fail. Do this silently so that the block >> layer doesn't output unnecessary error messages. >> >> This patch implements suggestion from Adrian Hunter, >> http://thread.gmane.org/gmane.linux.kernel.mmc/2714/focus=3474 >> >> Signed-off-by: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx> >> --- > > > It is safer to have zero initialisations so I suggest inverting > the meaning of the state bit i.e. > > #define MMC_STATE_CARD_GONE (1<<7) /* card removed from the slot */ > > > Also it would be nice is a request did not start if the card is > gone. For the non-async case, that is easy: > As far as I understand Sujit's patch it will stop new requests from being issued, blk_fetch_request(q) returns NULL. > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c > index 5278ffb..91d7721 100644 > --- a/drivers/mmc/core/core.c > +++ b/drivers/mmc/core/core.c > @@ -259,7 +259,7 @@ static void mmc_wait_for_req_done(struct mmc_host *host, > wait_for_completion(&mrq->completion); > > cmd = mrq->cmd; > - if (!cmd->error || !cmd->retries) > + if (!cmd->error || !cmd->retries || mmc_card_gone(host->card)) host->card will be NULL static void mmc_remove(struct mmc_host *host) { BUG_ON(!host); BUG_ON(!host->card); mmc_remove_card(host->card); host->card = NULL; } card is not freed until later. > break; > > pr_debug("%s: req failed (CMD%u): %d, retrying...\n", > @@ -374,6 +374,10 @@ EXPORT_SYMBOL(mmc_start_req); > */ > void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq) > { > + if (mmc_card_gone(host->card)) { > + mrq->cmd->error = -ENODEV; > + return; > + } > __mmc_start_req(host, mrq); > mmc_wait_for_req_done(host, mrq); > } > > > > The async case is harder... > I can help out with the non-async code if we go for your proposal. > >> drivers/mmc/card/queue.c | 5 +++++ >> drivers/mmc/core/bus.c | 2 ++ >> include/linux/mmc/card.h | 3 +++ >> 3 files changed, 10 insertions(+), 0 deletions(-) >> >> diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c >> index dcad59c..f8a3298 100644 >> --- a/drivers/mmc/card/queue.c >> +++ b/drivers/mmc/card/queue.c >> @@ -29,6 +29,8 @@ >> */ >> static int mmc_prep_request(struct request_queue *q, struct request *req) >> { >> + struct mmc_queue *mq = q->queuedata; >> + >> /* >> * We only like normal block requests and discards. >> */ >> @@ -37,6 +39,9 @@ static int mmc_prep_request(struct request_queue *q, struct request *req) >> return BLKPREP_KILL; >> } >> >> + if (mq && mq->card && !mmc_card_inserted(mq->card)) >> + return BLKPREP_KILL; >> + >> req->cmd_flags |= REQ_DONTPREP; >> >> return BLKPREP_OK; >> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c >> index 46b6e84..ea3be5d 100644 >> --- a/drivers/mmc/core/bus.c >> +++ b/drivers/mmc/core/bus.c >> @@ -308,6 +308,7 @@ int mmc_add_card(struct mmc_card *card) >> mmc_card_ddr_mode(card) ? "DDR " : "", >> type, card->rca); >> } >> + mmc_card_set_inserted(card); >> >> #ifdef CONFIG_DEBUG_FS >> mmc_add_card_debugfs(card); >> @@ -340,6 +341,7 @@ void mmc_remove_card(struct mmc_card *card) >> pr_info("%s: card %04x removed\n", >> mmc_hostname(card->host), card->rca); >> } >> + card->state &= ~MMC_STATE_INSERTED; >> device_del(&card->dev); >> } >> >> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h >> index b7a8cb1..be4125a 100644 >> --- a/include/linux/mmc/card.h >> +++ b/include/linux/mmc/card.h >> @@ -209,6 +209,7 @@ struct mmc_card { >> #define MMC_STATE_HIGHSPEED_DDR (1<<4) /* card is in high speed mode */ >> #define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */ >> #define MMC_CARD_SDXC (1<<6) /* card is SDXC */ >> +#define MMC_STATE_INSERTED (1<<7) /* card present in the slot */ >> unsigned int quirks; /* card quirks */ >> #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ >> #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ >> @@ -362,6 +363,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) >> #define mmc_card_sdio(c) ((c)->type == MMC_TYPE_SDIO) >> >> #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) >> +#define mmc_card_inserted(c) ((c)->state & MMC_STATE_INSERTED) >> #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) >> #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) >> #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) >> @@ -370,6 +372,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) >> #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) >> >> #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) >> +#define mmc_card_set_inserted(c) ((c)->state |= MMC_STATE_INSERTED) >> #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) >> #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) >> #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html