On 18 October 2011 10:49, Girish K S <girish.shivananjappa@xxxxxxxxxx> wrote:
> On 18 October 2011 10:46, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
>> Hi Girish.
>>
>> This patch is merged on mmc-next..did you know that?
>> And if deleted commit id bd3151f6c55c553bed2c0df72792841457b75bb5,
>> I will re-work for eMMC feature4.5.
>> git://git.infradead.org/users/kmpark/linux-2.6-samsung emmc4.5
>>
>> To Chris.
>> If you re-commit this patch, i also change "git pull request".
>> there are duplicated code in Notify patch, so i didn't add to cache patch.
>>HI Jaehoon,
> I have already bought it to the notice of Chris. After discussing
> with Chris i am resending the complete patch.
>> Regards,
>> Jaehoon Chung
>>Adding to it. In your mail with subject "[GIT PULL v2] Add eMMC4.5 feature for v3.2", for version 2 changes it is mentioned
that power notify feature is removed. Thats the reason i rebased my
patch to Chris's mmc-next branch and resent.
>> On 10/18/2011 02:05 PM, Girish K S wrote:
>>
>>> This patch adds the support for power off notify feature, available in
>>> eMMC 4.5 devices. If the the host has support for this feature, then the
>>> mmc core will notify it to the device by setting the POWER_OFF_NOTIFICATION
>>> byte in the extended csd register with a value 1(POWER_ON).
>>>
>>> For suspend mode short timeout is used, whereas for the normal poweroff long
>>> timeout is used.
>>>
>>> cc: Chris Ball <cjb@xxxxxxxxxx>
>>> Signed-off-by: Girish K S <girish.shivananjappa@xxxxxxxxxx>
>>> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
>>> ---
>>> Changes in V9:
>>> Removed the macros not related with the PowerOff notify feature.
>>> The previous patch with commit id
>>> bd3151f6c55c553bed2c0df72792841457b75bb5 should be deleted before
>>> applying this patch.
>>> Changes in V8:
>>> Updated with review comments of Chris Ball and rebased to
>>> chris-mmc/mmc-next branch.
>>> Changes in V7:
>>> Rebased to chris-mmc/mmc-next branch. merged to patches to single
>>> patch.
>>> Changes in V6:
>>> Fixes checkpatch errors. The patches are generated after rebasing to
>>> chris's mmc-next branch.
>>> Changes in V5:
>>> This patch version fixes the problem with power off notify function,
>>> when called for the first time and card is not yet initialised.
>>> Changes in V4:
>>> Updated with review comments of Jeon
>>> Changes in V2:
>>> Adds poweroff notification handling in suspend/normal.
>>>
>>> drivers/mmc/core/core.c | 34 ++++++++++++++++++++++++++++++++++
>>> drivers/mmc/core/mmc.c | 23 +++++++++++++++++++++--
>>> drivers/mmc/host/sdhci.c | 9 +++++++++
>>> include/linux/mmc/card.h | 6 ++++++
>>> include/linux/mmc/host.h | 5 +++++
>>> include/linux/mmc/mmc.h | 6 ++++++
>>> 6 files changed, 81 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
>>> index 61d7730..b1eca96 100644
>>> --- a/drivers/mmc/core/core.c
>>> +++ b/drivers/mmc/core/core.c
>>> @@ -1212,11 +1212,43 @@ static void mmc_power_up(struct mmc_host *host)
>>>
>>> void mmc_power_off(struct mmc_host *host)
>>> {
>>> + struct mmc_card *card;
>>> + unsigned int notify_type;
>>> + unsigned int timeout;
>>> + int err;
>>> +
>>> mmc_host_clk_hold(host);
>>>
>>> + card = host->card;
>>> host->ios.clock = 0;
>>> host->ios.vdd = 0;
>>>
>>> + if (card && mmc_card_mmc(card) &&
>>> + card->poweroff_notify_state == MMC_POWERED_ON) {
>>> +
>>> + if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
>>> + notify_type = EXT_CSD_POWER_OFF_SHORT;
>>> + timeout = card->ext_csd.generic_cmd6_time;
>>> + card->poweroff_notify_state = MMC_POWEROFF_SHORT;
>>> + } else {
>>> + notify_type = EXT_CSD_POWER_OFF_LONG;
>>> + timeout = card->ext_csd.power_off_longtime;
>>> + card->poweroff_notify_state = MMC_POWEROFF_LONG;
>>> + }
>>> +
>>> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>>> + EXT_CSD_POWER_OFF_NOTIFICATION,
>>> + notify_type, timeout);
>>> +
>>> + if (err && err != -EBADMSG)
>>> + pr_err("Device failed to respond within %d poweroff "
>>> + "time. Forcefully powering down the device\n",
>>> + timeout);
>>> +
>>> + /* Set the card state to no notification after the poweroff */
>>> + card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
>>> + }
>>> +
>>> /*
>>> * Reset ocr mask to be the highest possible voltage supported for
>>> * this mmc host. This value will be used at next power up.
>>> @@ -2208,6 +2240,7 @@ int mmc_pm_notify(struct notifier_block *notify_block,
>>>
>>> spin_lock_irqsave(&host->lock, flags);
>>> host->rescan_disable = 1;
>>> + host->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
>>> spin_unlock_irqrestore(&host->lock, flags);
>>> cancel_delayed_work_sync(&host->detect);
>>>
>>> @@ -2231,6 +2264,7 @@ int mmc_pm_notify(struct notifier_block *notify_block,
>>>
>>> spin_lock_irqsave(&host->lock, flags);
>>> host->rescan_disable = 0;
>>> + host->power_notify_type = MMC_HOST_PW_NOTIFY_LONG;
>>> spin_unlock_irqrestore(&host->lock, flags);
>>> mmc_detect_change(host, 0);
>>>
>>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>>> index 4e869d3..f8ea938 100644
>>> --- a/drivers/mmc/core/mmc.c
>>> +++ b/drivers/mmc/core/mmc.c
>>> @@ -458,10 +458,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
>>> else
>>> card->erased_byte = 0x0;
>>>
>>> - if (card->ext_csd.rev >= 6)
>>> + if (card->ext_csd.rev >= 6) {
>>> card->ext_csd.generic_cmd6_time = 10 *
>>> ext_csd[EXT_CSD_GENERIC_CMD6_TIME];
>>> - else
>>> + card->ext_csd.power_off_longtime = 10 *
>>> + ext_csd[EXT_CSD_POWER_OFF_LONG_TIME];
>>> + } else
>>> card->ext_csd.generic_cmd6_time = 0;
>>>
>>> out:
>>> @@ -846,6 +848,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
>>> }
>>>
>>> /*
>>> + * If the host supports the power_off_notify capability then
>>> + * set the notification byte in the ext_csd register of device
>>> + */
>>> + if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) &&
>>> + (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) {
>>> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
>>> + EXT_CSD_POWER_OFF_NOTIFICATION,
>>> + EXT_CSD_POWER_ON,
>>> + card->ext_csd.generic_cmd6_time);
>>> + if (err && err != -EBADMSG)
>>> + goto free_card;
>>> + }
>>> +
>>> + if (!err)
>>> + card->poweroff_notify_state = MMC_POWERED_ON;
>>> +
>>> + /*
>>> * Activate high speed (if supported)
>>> */
>>> if ((card->ext_csd.hs_max_dtr != 0) &&
>>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>>> index 2cc3ffa..91fdaed 100644
>>> --- a/drivers/mmc/host/sdhci.c
>>> +++ b/drivers/mmc/host/sdhci.c
>>> @@ -2739,6 +2739,15 @@ int sdhci_add_host(struct sdhci_host *host)
>>> if (caps[1] & SDHCI_DRIVER_TYPE_D)
>>> mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
>>>
>>> + /*
>>> + * If Notify capability is enabled by the host, set notify to
>>> + * short power off notify timeout value.
>>> + */
>>> + if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY)
>>> + mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
>>> + else
>>> + mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE;
>>> +
>>> /* Initial value for re-tuning timer count */
>>> host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
>>> SDHCI_RETUNING_TIMER_COUNT_SHIFT;
>>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>>> index 30d493c..fce88b3 100644
>>> --- a/include/linux/mmc/card.h
>>> +++ b/include/linux/mmc/card.h
>>> @@ -54,6 +54,7 @@ struct mmc_ext_csd {
>>> unsigned int part_time; /* Units: ms */
>>> unsigned int sa_timeout; /* Units: 100ns */
>>> unsigned int generic_cmd6_time; /* Units: 10ms */
>>> + unsigned int power_off_longtime; /* Units: ms */
>>> unsigned int hs_max_dtr;
>>> unsigned int sectors;
>>> unsigned int card_type;
>>> @@ -209,6 +210,11 @@ struct mmc_card {
>>> #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */
>>> #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */
>>> /* byte mode */
>>> + unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */
>>> +#define MMC_NO_POWER_NOTIFICATION 0
>>> +#define MMC_POWERED_ON 1
>>> +#define MMC_POWEROFF_SHORT 2
>>> +#define MMC_POWEROFF_LONG 3
>>>
>>> unsigned int erase_size; /* erase size in sectors */
>>> unsigned int erase_shift; /* if erase unit is power 2 */
>>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
>>> index aed5bc7..07c0abf 100644
>>> --- a/include/linux/mmc/host.h
>>> +++ b/include/linux/mmc/host.h
>>> @@ -239,8 +239,13 @@ struct mmc_host {
>>> unsigned int caps2; /* More host capabilities */
>>>
>>> #define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */
>>> +#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */
>>>
>>> mmc_pm_flag_t pm_caps; /* supported pm features */
>>> + unsigned int power_notify_type;
>>> +#define MMC_HOST_PW_NOTIFY_NONE 0
>>> +#define MMC_HOST_PW_NOTIFY_SHORT 1
>>> +#define MMC_HOST_PW_NOTIFY_LONG 2
>>>
>>> #ifdef CONFIG_MMC_CLKGATE
>>> int clk_requests; /* internal reference counter */
>>> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
>>> index cd63c2d..8b0e0a7 100644
>>> --- a/include/linux/mmc/mmc.h
>>> +++ b/include/linux/mmc/mmc.h
>>> @@ -271,6 +271,7 @@ struct _mmc_csd {
>>> */
>>>
>>> #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
>>> +#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
>>> #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
>>> #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
>>> #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
>>> @@ -346,6 +347,11 @@ struct _mmc_csd {
>>> #define EXT_CSD_RST_N_EN_MASK 0x3
>>> #define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */
>>>
>>> +#define EXT_CSD_NO_POWER_NOTIFICATION 0
>>> +#define EXT_CSD_POWER_ON 1
>>> +#define EXT_CSD_POWER_OFF_SHORT 2
>>> +#define EXT_CSD_POWER_OFF_LONG 3
>>> +
>>> #define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */
>>> #define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */
>>> #define EXT_CSD_PWR_CL_8BIT_SHIFT 4
>>
>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
