Hi Shashidhar.
I tested dual-buffer descriptor with applied your patch.
Actually, i didn't see to improve the performance. Dose it relate with
the performance? i didn't sure..
And you used #ifdef CHAIN_DESC and #ifdef DUAL_BUFFER_DESC.
I think if you use CHAIN_DESC by default, need not #ifdef CHAIN_DESC.
Because if you didn't select DUAL_BUFFER_DESC, should be work with
CHAIN_DESC. (i think good that using #ifdef..#else..#endif)
Regards,
Jaehoon Chung
On 09/27/2011 08:39 PM, Shashidhar Hiremath wrote:
> This Patch adds the support for Dual Buffer Descriptor mode of
> Operation for the dw_mmc driver.The patch also provides the configurability
> Option for choosing DUAL_BUFFER mode or the chained modes through menuconfig.
> The Menuconfig option for selecting Dual Buffer mode or chained mode
> is selected only if Internal DMAC is enabled.
>
> Signed-off-by: Shashidhar Hiremath <shashidharh@xxxxxxxxxxxxxxx>
> ---
> v2:
> * As per suggestions by Will Newton and James Hogan
> -Config symbol Names prefixed with MMC_DW
> -Added more Description for Config parameters added
> -Removed unnecessary config opion IDMAC_DESC_MODE
> -IDMAC_SET_BUFFER_SIZE chenged IDMAC_SET_BUFFER_SIZES
> -fixed typos and indented commments correctly
> -if ((i +1) <= sg_len changed to ((i +1) < sg_len
> -duplication "desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC" line removed
> -fixed bug in making DSL value zero
> -removed ANDing the des1 with zero before writing buffer lengths to it
> -Added proper multiline comments
> v3:
> * As per suggestions by James Hogan
> -Modified Config Symbol Names in the Driver File
> -Fixed Bug in Clearing the DSL field of BMOD register
> -Fixed bug in IDMAC_SET_BUFFER_SIZES
> v4:
> * After Testing the Dual Buffer Support
> -Modified the dma_init sequence to support Dual Buffer Mode
>
> drivers/mmc/host/Kconfig | 19 ++++++++++++++
> drivers/mmc/host/dw_mmc.c | 58 ++++++++++++++++++++++++++++++++++++++++----
> drivers/mmc/host/dw_mmc.h | 2 +
> 3 files changed, 73 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 8c87096..dd0df83 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -534,6 +534,25 @@ config MMC_DW_IDMAC
> Designware Mobile Storage IP block. This disables the external DMA
> interface.
>
> +choice
> + prompt "select IDMAC Descriptors Mode"
> + depends on MMC_DW_IDMAC
> +
> +config MMC_DW_CHAIN_DESC
> + bool "Chain Descriptor Structure"
> + help
> + Select this option to enable Chained Mode of Operation and the
> + Chained Mode operates in a mode where only one Buffer will be used
> + for each descriptor when the transfer is happening in DMA mode.
> +
> +config MMC_DW_DUAL_BUFFER_DESC
> + bool "Dual Buffer Descriptor Structure"
> + help
> + Select this option to enable Dual Buffer Desc Mode of Operation and
> + Dual Buffer Descriptor Mode or the Ring Mode indicates that two
> + buffers can be used for each descriptor during DMA mode transfer.
> +endchoice
> +
> config MMC_SH_MMCIF
> tristate "SuperH Internal MMCIF support"
> depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE)
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index ff0f714..ba54bb8 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -63,6 +63,8 @@ struct idmac_desc {
> u32 des1; /* Buffer sizes */
> #define IDMAC_SET_BUFFER1_SIZE(d, s) \
> ((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
> +#define IDMAC_SET_BUFFER_SIZES(d, s1, s2) \
> + (d->des1 = (((s1) & 0x1fff) | (((s2) & 0x1fff) << 13)))
>
> u32 des2; /* buffer 1 physical address */
>
> @@ -347,18 +349,45 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
> int i;
> struct idmac_desc *desc = host->sg_cpu;
>
> +#ifdef CONFIG_MMC_DW_DUAL_BUFFER_DESC
> + for (i = 0; i < sg_len; i += 2, desc++) {
> +#endif
> +#ifdef CONFIG_MMC_DW_CHAIN_DESC
> for (i = 0; i < sg_len; i++, desc++) {
> - unsigned int length = sg_dma_len(&data->sg[i]);
> - u32 mem_addr = sg_dma_address(&data->sg[i]);
> +#endif
> + unsigned int length1 = sg_dma_len(&data->sg[i]);
> + u32 mem_addr1 = sg_dma_address(&data->sg[i]);
> +#ifdef CONFIG_MMC_DW_DUAL_BUFFER_DESC
> + unsigned int length2 = 0;
> + u32 mem_addr2;
> +
> + if ((i+1) < sg_len) {
> + length2 = sg_dma_len(&data->sg[(i+1)]);
> + mem_addr2 = sg_dma_address(&data->sg[i+1]);
> + }
> +
> + /* Set the OWN bit and disable interrupts for this descriptor
> + * and disable the Chained Mode
> + */
> + desc->des0 = (IDMAC_DES0_OWN | IDMAC_DES0_DIC) & (~IDMAC_DES0_CH);
> + /* Buffer length1 and length2 */
> + IDMAC_SET_BUFFER_SIZES(desc, length1, length2);
> +#endif
> +#ifdef CONFIG_MMC_DW_CHAIN_DESC
>
> /* Set the OWN bit and disable interrupts for this descriptor */
> desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH;
>
> - /* Buffer length */
> - IDMAC_SET_BUFFER1_SIZE(desc, length);
> + /* Buffer length1 */
> + IDMAC_SET_BUFFER1_SIZE(desc, length1);
> +#endif
>
> /* Physical address to DMA to/from */
> - desc->des2 = mem_addr;
> + desc->des2 = mem_addr1;
> +#ifdef CONFIG_MMC_DW_DUAL_BUFFER_DESC
> + if ((i+1) < sg_len)
> + desc->des3 = mem_addr2;
> +#endif
> }
>
> /* Set first descriptor */
> @@ -366,8 +395,14 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
> desc->des0 |= IDMAC_DES0_FD;
>
> /* Set last descriptor */
> +#ifdef CONFIG_MMC_DW_DUAL_BUFFER_DESC
> + desc = host->sg_cpu + ((i/2) - 1) * sizeof(struct idmac_desc);
> + desc->des0 &= (~IDMAC_DES0_DIC);
> +#endif
> +#ifdef CONFIG_MMC_DW_CHAIN_DESC
> desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
> desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
> +#endif
> desc->des0 |= IDMAC_DES0_LD;
>
> wmb();
> @@ -388,6 +423,10 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>
> /* Enable the IDMAC */
> temp = mci_readl(host, BMOD);
> +#ifdef CONFIG_MMC_DW_DUAL_BUFFER_DESC
> + /* The Descriptor Skip length is made zero */
> + temp &= ~(SDMMC_BMOD_DSL(0x1f));
> +#endif
> temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
> mci_writel(host, BMOD, temp);
>
> @@ -402,13 +441,20 @@ static int dw_mci_idmac_init(struct dw_mci *host)
>
> /* Number of descriptors in the ring buffer */
> host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
> -
> +#ifdef CONFIG_MMC_DW_CHAIN_DESC
> /* Forward link the descriptor list */
> for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
> p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
> +#endif
> +#ifdef CONFIG_MMC_DW_DUAL_BUFFER_DESC
> + for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++)
> + p++;
> +#endif
>
> /* Set the last descriptor as the end-of-ring descriptor */
> +#ifdef CONFIG_MMC_DW_CHAIN_DESC
> p->des3 = host->sg_dma;
> +#endif
> p->des0 = IDMAC_DES0_ER;
>
> /* Mask out interrupts - get Tx & Rx complete only */
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index 027d377..0520dc8 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -72,6 +72,8 @@
> /* Clock Enable register defines */
> #define SDMMC_CLKEN_LOW_PWR BIT(16)
> #define SDMMC_CLKEN_ENABLE BIT(0)
> +/* BMOD register defines */
> +#define SDMMC_BMOD_DSL(n) _SBF(2, (n))
> /* time-out register defines */
> #define SDMMC_TMOUT_DATA(n) _SBF(8, (n))
> #define SDMMC_TMOUT_DATA_MSK 0xFFFFFF00
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
