* Balaji T K <balajitk@xxxxxx> [110929 07:11]:
> MMC1 data line IO's are powered down in before set regulator function.
> IO's should not be powered ON when regulator is OFF.
> Keep the IO's in power pown mode after regulator OFF.
> Delete incorrect comments which are not applicable for OMAP4.
Care to check how this is different from what I added into fixes
branch as commit 3fe8df93b0992199e3a0026fc51e90b705f94e40?
Is this a separate issue?
Tony
> Signed-off-by: Balaji T K <balajitk@xxxxxx>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
> Reported-by: Viswanath Puttagunta <vishp@xxxxxx>
> ---
> arch/arm/mach-omap2/hsmmc.c | 14 ++------------
> 1 files changed, 2 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
> index 097a42d..9cc2eb7 100644
> --- a/arch/arm/mach-omap2/hsmmc.c
> +++ b/arch/arm/mach-omap2/hsmmc.c
> @@ -129,15 +129,11 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
> * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
> * card with Vcc regulator (from twl4030 or whatever). OMAP has both
> * 1.8V and 3.0V modes, controlled by the PBIAS register.
> - *
> - * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
> - * is most naturally TWL VSIM; those pins also use PBIAS.
> - *
> - * FIXME handle VMMC1A as needed ...
> */
> reg = omap4_ctrl_pad_readl(control_pbias_offset);
> reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
> - OMAP4_MMC1_PWRDNZ_MASK);
> + OMAP4_MMC1_PWRDNZ_MASK |
> + OMAP4_MMC1_PBIASLITE_VMODE_MASK);
> omap4_ctrl_pad_writel(reg, control_pbias_offset);
> }
>
> @@ -172,12 +168,6 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
> reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
> omap4_ctrl_pad_writel(reg, control_pbias_offset);
> }
> - } else {
> - reg = omap4_ctrl_pad_readl(control_pbias_offset);
> - reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
> - OMAP4_MMC1_PWRDNZ_MASK |
> - OMAP4_MMC1_PBIASLITE_VMODE_MASK);
> - omap4_ctrl_pad_writel(reg, control_pbias_offset);
> }
> }
>
> --
> 1.7.0.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
