This patch adds the support for power off notify feature available in eMMC 4.5 devices. If the the host has support for this feature, then the mmc core will notify it to the device by setting the POWER_OFF_NOTIFICATION byte in the extended csd register with a value 1(POWER_ON). This patch should be applied after Seungwon Jeon's patch for cmd6 timeout. Signed-off-by: Girish K S <girish.shivananjappa@xxxxxxxxxx> --- v2: adds poweroff notification handling in suspend/normal v4: updated with review comments of Jeon v5: This patch version fixes the problem with power off notify function, when called for the first time and card is not yet initialised. v6: fixes checkpatch errors. The patches are generated after rebasing to chris's mmc-next branch. drivers/mmc/core/mmc.c | 17 +++++++++++++++++ include/linux/mmc/card.h | 1 + include/linux/mmc/host.h | 1 + include/linux/mmc/mmc.h | 6 ++++++ 4 files changed, 25 insertions(+), 0 deletions(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 7adc30d..a547f49 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -412,6 +412,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) else card->erased_byte = 0x0; + if (card->ext_csd.rev >= 6) { + card->ext_csd.power_off_longtime = 10 * + ext_csd[EXT_CSD_POWER_OFF_LONG_TIME]; + } out: return err; } @@ -713,6 +717,19 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* + * If the host supports the power_off_notify capability then + * set the notification byte in the ext_csd register of device + */ + if (host->caps & MMC_CAP_POWER_OFF_NOTIFY) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + EXT_CSD_POWER_ON, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + } + + /* * Activate high speed (if supported) */ if ((card->ext_csd.hs_max_dtr != 0) && diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 5294ddf..0f9dbd6 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -53,6 +53,7 @@ struct mmc_ext_csd { u8 rst_n_function; unsigned int part_time; /* Units: ms */ unsigned int sa_timeout; /* Units: 100ns */ + unsigned int power_off_longtime; /* Units: ms */ unsigned int hs_max_dtr; unsigned int sectors; unsigned int card_type; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index b2aefea..ed49e88 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -235,6 +235,7 @@ struct mmc_host { #define MMC_CAP_MAX_CURRENT_800 (1 << 29) /* Host max current limit is 800mA */ #define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */ #define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */ +#define MMC_CAP_POWER_OFF_NOTIFY (1 << 31)/*Notify poweroff supported */ mmc_pm_flag_t pm_caps; /* supported pm features */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index ed8fca8..95912da 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -270,6 +270,7 @@ struct _mmc_csd { * EXT_CSD fields */ +#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ @@ -294,6 +295,7 @@ struct _mmc_csd { #define EXT_CSD_SEC_ERASE_MULT 230 /* RO */ #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */ #define EXT_CSD_TRIM_MULT 232 /* RO */ +#define EXT_CSD_POWER_OFF_LONG_TIME 247 /*RO*/ /* * EXT_CSD field definitions @@ -331,6 +333,10 @@ struct _mmc_csd { #define EXT_CSD_RST_N_EN_MASK 0x3 #define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */ +#define EXT_CSD_NO_POWER_NOTIFICATION 0 +#define EXT_CSD_POWER_ON 1 +#define EXT_CSD_POWER_OFF_SHORT 2 +#define EXT_CSD_POWER_OFF_LONG 3 /* * MMC_SWITCH access modes -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html