Re: [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 05, 2011 at 11:54:34AM -0600, Grant Likely wrote:
> On Tue, Jul 5, 2011 at 9:26 AM, Shawn Guo <shawn.guo@xxxxxxxxxx> wrote:
> > The patch adds device tree probe support for sdhci-esdhc-imx driver.
> >
> > Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> > Cc: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
> > Cc: Chris Ball <cjb@xxxxxxxxxx>
> > Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |   40 ++++++++
> >  drivers/mmc/host/sdhci-esdhc-imx.c                 |  102 +++++++++++++++++++-
> >  2 files changed, 137 insertions(+), 5 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
> > new file mode 100644
> > index 0000000..351d239
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
> > @@ -0,0 +1,40 @@
> > +* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
> > +
> > +The Enhanced Secure Digital Host Controller on Freescale i.MX family
> > +provides an interface for MMC, SD, and SDIO types of memory cards.
> > +
> > +Required properties:
> > +- compatible : Should be "fsl,<chip>-esdhc"
> > +- reg : Should contain eSDHC registers location and length
> > +- interrupts : Should contain eSDHC interrupt
> > +- cd-type : String, card detection (CD) method.  Supported values are:
> > +    "none" : No CD
> > +    "controller" : Uses eSDHC controller internal CD signal
> > +    "gpio" : Uses GPIO pin for CD
> > +    "permanent" : No CD because card is permanently wired to host
> > +- wp-type : String, write protection (WP) method.  Supported values are:
> > +    "none" : No WP
> > +    "controller" : Uses eSDHC controller internal WP signal
> > +    "gpio" : Uses GPIO pin for WP
> > +- gpios : Should specify GPIOs in this order: CD GPIO, WP GPIO, if
> > +  properties cd-type and wp-type are "gpio".
> 
> Again, be explicit in your gpios property names.  Create a different
> property for each gpio: cd-gpios and wp-gpios.
> 
> As for wp-type and cd-type, I think you can drop them.  Default to
> internal controller CD and WP pins.  Use gpio if cd-gpios or wp-gpios
> is present, and define specific properties for the no-wp, no-cd and
> fixed-card cases.  (can you tell that I'm not a fan of the "*-type"
> binding for this driver?)  :-)
> 
I would let default be no CD/WP, and define properties for
controller internal CD/WP and wired case, if you do not see a
problem with it.

-- 
Regards,
Shawn

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux