Hi, Mr Chung. > -----Original Message----- > From: linux-mmc-owner@xxxxxxxxxxxxxxx [mailto:linux-mmc- > owner@xxxxxxxxxxxxxxx] On Behalf Of Jaehoon Chung > Sent: Thursday, June 30, 2011 3:55 PM > To: Seungwon Jeon > Cc: linux-mmc@xxxxxxxxxxxxxxx; cjb@xxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; Kyungmin Park > Subject: Re: [PATCH] mmc: dw_mmc: Supply clocks for both host and card. > > Hi Mr.Jeon > > What means cclk_name/ cclk enable? > Controlling card clock is possible? > Sorry, i didn't understand... > (My understanding is that if we set host clk, cclk is used with host_clk.) > > Plz can you explain to me? Yes, cclk is source clock for card I/O. It can be different from Host operating clock(hclk). Best regards, Seunwgon. > Regards, > Jaehoon Chung > > Seungwon Jeon wrote: > > Add enabling clocks for both host controller and card. > > > > Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx> > > --- > > drivers/mmc/host/dw_mmc.c | 33 ++++++++++++++++++++++++++++++++- > > include/linux/mmc/dw_mmc.h | 7 +++++++ > > 2 files changed, 39 insertions(+), 1 deletions(-) > > > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > > index 10b6979..a524416 100644 > > --- a/drivers/mmc/host/dw_mmc.c > > +++ b/drivers/mmc/host/dw_mmc.c > > @@ -1797,6 +1797,24 @@ static int dw_mci_probe(struct platform_device > *pdev) > > goto err_freehost; > > } > > > > + host->hclk = clk_get(&pdev->dev, pdata->hclk_name); > > + if (IS_ERR(host->hclk)) { > > + dev_err(&pdev->dev, > > + "Failed to get hclk\n"); > > + ret = PTR_ERR(host->hclk); > > + goto err_freehost; > > + } > > + clk_enable(host->hclk); > > + > > + host->cclk = clk_get(&pdev->dev, pdata->cclk_name); > > + if (IS_ERR(host->cclk)) { > > + dev_err(&pdev->dev, > > + "Failed to get cclk\n"); > > + ret = PTR_ERR(host->cclk); > > + goto err_free_hclk; > > + } > > + clk_enable(host->cclk); > > + > > host->bus_hz = pdata->bus_hz; > > host->quirks = pdata->quirks; > > > > @@ -1806,7 +1824,7 @@ static int dw_mci_probe(struct platform_device > *pdev) > > ret = -ENOMEM; > > host->regs = ioremap(regs->start, regs->end - regs->start + 1); > > if (!host->regs) > > - goto err_freehost; > > + goto err_free_cclk; > > > > host->dma_ops = pdata->dma_ops; > > dw_mci_init_dma(host); > > @@ -1945,6 +1963,13 @@ err_dmaunmap: > > regulator_put(host->vmmc); > > } > > > > +err_free_cclk: > > + clk_disable(host->cclk); > > + clk_put(host->cclk); > > + > > +err_free_hclk: > > + clk_disable(host->hclk); > > + clk_put(host->hclk); > > > > err_freehost: > > kfree(host); > > @@ -1983,6 +2008,12 @@ static int __exit dw_mci_remove(struct > platform_device *pdev) > > regulator_put(host->vmmc); > > } > > > > + clk_disable(host->cclk); > > + clk_put(host->cclk); > > + > > + clk_disable(host->hclk); > > + clk_put(host->hclk); > > + > > iounmap(host->regs); > > > > kfree(host); > > diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h > > index f3f68ee..56b3f27 100644 > > --- a/include/linux/mmc/dw_mmc.h > > +++ b/include/linux/mmc/dw_mmc.h > > @@ -47,6 +47,8 @@ struct mmc_data; > > * @cmd: The command currently being sent to the card, or NULL. > > * @data: The data currently being transferred, or NULL if no data > > * transfer is in progress. > > + * @hclk: Clock for host. > > + * @cclk: Clock for card. > > * @use_dma: Whether DMA channel is initialized or not. > > * @sg_dma: Bus address of DMA buffer. > > * @sg_cpu: Virtual address of DMA buffer. > > @@ -118,6 +120,8 @@ struct dw_mci { > > struct mmc_request *mrq; > > struct mmc_command *cmd; > > struct mmc_data *data; > > + struct clk *hclk; > > + struct clk *cclk; > > > > /* DMA interface members*/ > > int use_dma; > > @@ -218,6 +222,9 @@ struct dw_mci_board { > > /* delay in mS before detecting cards after interrupt */ > > u32 detect_delay_ms; > > > > + char *hclk_name; > > + char *cclk_name; > > + > > int (*init)(u32 slot_id, irq_handler_t , void *); > > int (*get_ro)(u32 slot_id); > > int (*get_cd)(u32 slot_id); > > -- > > 1.7.0.4 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
