Re: SDHCI I/O errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andy,

On Mon, Jun 20 2011, Chris Ball wrote:
> On Mon, Jun 20 2011, Andrew Lutomirski wrote:
>> I have an SDHC card that works fine in a camera and in several
>> different USB-based readers.  On my sdhci reader (the integrated one
>> on a Lenovo X220), though, it spews stuff like:
>>
>> [  306.103556] mmcblk0: error -110 sending read/write command,
>> response 0x0, card status 0x400b00
>> [  306.103559] end_request: I/O error, dev mmcblk0, sector 410272
>> [  306.103595] mmc0: Got data interrupt 0x00600000 even though no data
>> operation was in progress.
>> [  306.103597] sdhci: =========== REGISTER DUMP (mmc0)===========
>> [  306.103602] sdhci: Sys addr: 0xf9253200 | Version:  0x00000502
>> [  306.103607] sdhci: Blk size: 0x00007200 | Blk cnt:  0x00000001
>> [  306.103613] sdhci: Argument: 0x000642a1 | Trn mode: 0x00000013
>> [  306.103618] sdhci: Present:  0x01cf0000 | Host ctl: 0x00000003
>> [  306.103623] sdhci: Power:    0x0000000f | Blk gap:  0x00000000
>> [  306.103628] sdhci: Wake-up:  0x00000000 | Clock:    0x00000107
>> [  306.103634] sdhci: Timeout:  0x00000009 | Int stat: 0x00000000
>> [  306.103639] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb
>> [  306.103644] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
>> [  306.103649] sdhci: Caps:     0x21e8c8b2 | Caps_1:   0x00008073
>> [  306.103654] sdhci: Cmd:      0x0000113a | Max curr: 0x00000040
>> [  306.103655] sdhci: ===========================================
>>
>> all over the logs and fails some (but not all) attempts to read it.
>> The startup messages are:
>>
>> [  830.308403] sdhci-pci 0000:0d:00.0: SDHCI controller found
>> [1180:e823] (rev 4)
>> [  830.308632] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level,
>> low) -> IRQ 16
>> [  830.308720] sdhci-pci 0000:0d:00.0: setting latency timer to 64
>> [  830.308730] mmc0: no vmmc regulator found
>> [  830.308802] Registered led device: mmc0::
>> [  830.309059] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
>>
>> and lspci says:
>>
>> 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 04)
>>
>> I see this on 2.6.39.1 and 3.0 git from today.
>
> Any idea whether this is present in previous kernels too?  It'd be
> great if you can test a few earlier ones and find out whether we're 
> looking at a regression or just new hardware to add quirks for.

Ah, could you try this patch, please?

http://thread.gmane.org/gmane.linux.kernel.mmc/8254
("mmc: Enable MMC card reader for RICOH [1180:e823]")

It's already present in mmc-next and queued for 3.0.

- Chris.
-- 
Chris Ball   <cjb@xxxxxxxxxx>   <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux