On Mon, 20 Jun 2011, Simon Horman wrote:
> Some controllers require waiting for the bus to become idle
> before writing to some registers. I have implemented this
> by adding a hook to sd_ctrl_write16() and implementing
> a hook for SDHI which waits for the bus to become idle.
>
> Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
> Cc: Magnus Damm <magnus.damm@xxxxxxxxx>
> Signed-off-by: Simon Horman <horms@xxxxxxxxxxxx>
>
> ---
>
> Dependenvies: "mmc: tmio: Share register access functions"
> ---
> drivers/mmc/host/sh_mobile_sdhi.c | 34 ++++++++++++++++++++++++++++++++++
> drivers/mmc/host/tmio_mmc.h | 2 ++
> include/linux/mfd/tmio.h | 8 ++++++++
> include/linux/mmc/tmio.h | 1 +
> 4 files changed, 45 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
> index b365429..6c56453 100644
> --- a/drivers/mmc/host/sh_mobile_sdhi.c
> +++ b/drivers/mmc/host/sh_mobile_sdhi.c
> @@ -27,6 +27,8 @@
> #include <linux/mfd/tmio.h>
> #include <linux/sh_dma.h>
>
> +#include <asm/delay.h>
linux/delay.h
> +
> #include "tmio_mmc.h"
>
> struct sh_mobile_sdhi {
> @@ -55,6 +57,37 @@ static int sh_mobile_sdhi_get_cd(struct platform_device *pdev)
> return -ENOSYS;
> }
>
> +static void sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host)
> +{
> + int timeout = 1000;
> +
> + while (--timeout && !(sd_ctrl_read16(host, CTL_STATUS2) & (1 << 13)))
> + udelay(1);
> +
> + if (!timeout)
> + dev_warn(host->pdata->dev, "timeout waiting for SD bus idle\n");
> +
> +}
> +
> +static void sh_mobile_sdhi_write16_hook(struct tmio_mmc_host *host, int addr)
> +{
> + if (!(host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT))
> + return;
> +
> + switch (addr)
> + {
> + case CTL_SD_CMD:
> + case CTL_STOP_INTERNAL_ACTION:
> + case CTL_XFER_BLK_COUNT:
> + case CTL_SD_CARD_CLK_CTL:
> + case CTL_SD_XFER_LEN:
> + case CTL_SD_MEM_CARD_OPT:
> + case CTL_TRANSACTION_CTL:
> + case CTL_DMA_ENABLE:
> + sh_mobile_sdhi_wait_idle(host);
> + }
> +}
> +
> static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
> {
> struct sh_mobile_sdhi *priv;
> @@ -86,6 +119,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
> mmc_data->hclk = clk_get_rate(priv->clk);
> mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
> mmc_data->get_cd = sh_mobile_sdhi_get_cd;
> + mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
Not sure I like the "write16_hook" name. You consider this callback as
something the host might need to do, when writing to a 16-bit register. In
this specific case it is actually waiting for the bus to become idle,
which might also be needed in other locations. So, maybe it is better to
call this callback "wait_idle" or something similar? Or you think, other
hosts might need a write16 hook doing something different?...
Thanks
Guennadi
> mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
> if (p) {
> mmc_data->flags = p->tmio_flags;
> diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
> index 0c22df0..5912cf3 100644
> --- a/drivers/mmc/host/tmio_mmc.h
> +++ b/drivers/mmc/host/tmio_mmc.h
> @@ -153,6 +153,8 @@ static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
>
> static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val)
> {
> + if (host->pdata->write16_hook)
> + host->pdata->write16_hook(host, addr);
> writew(val, host->ctl + (addr << host->bus_shift));
> }
>
> diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
> index 5a90266..dc5db86 100644
> --- a/include/linux/mfd/tmio.h
> +++ b/include/linux/mfd/tmio.h
> @@ -68,6 +68,11 @@
> * controller and report the event to the driver.
> */
> #define TMIO_MMC_HAS_COLD_CD (1 << 3)
> +/*
> + * Some controllers require waiting for the SD bus to become
> + * idle before writing to some registers.
> + */
> +#define TMIO_MMC_HAS_IDLE_WAIT (1 << 4)
>
> int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
> int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
> @@ -80,6 +85,8 @@ struct tmio_mmc_dma {
> int alignment_shift;
> };
>
> +struct tmio_mmc_host;
> +
> /*
> * data for the MMC controller
> */
> @@ -94,6 +101,7 @@ struct tmio_mmc_data {
> void (*set_pwr)(struct platform_device *host, int state);
> void (*set_clk_div)(struct platform_device *host, int state);
> int (*get_cd)(struct platform_device *host);
> + void (*write16_hook)(struct tmio_mmc_host *host, int addr);
> };
>
> static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata)
> diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h
> index 0a6e40d..f235757 100644
> --- a/include/linux/mmc/tmio.h
> +++ b/include/linux/mmc/tmio.h
> @@ -21,6 +21,7 @@
> #define CTL_XFER_BLK_COUNT 0xa
> #define CTL_RESPONSE 0x0c
> #define CTL_STATUS 0x1c
> +#define CTL_STATUS2 0x1e
> #define CTL_IRQ_MASK 0x20
> #define CTL_SD_CARD_CLK_CTL 0x24
> #define CTL_SD_XFER_LEN 0x26
> --
> 1.7.4.4
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
