Hi Everybody, On Fri, Jun 3, 2011 at 2:56 AM, Heiko Stübner <heiko@xxxxxxxxx> wrote: > > Hi, > > Am Freitag 03 Juni 2011, 01:48:05 schrieb Kyungmin Park: > > As I don't have the s3c2416 user manaul, I'm not sure it's support > > AUTO CMD12 or not. but at least it's support at s3c6410 and later. > According to the manual, the 2416 supports AUTO CMD12. > > As I wrote disabling auto cmd12 only works sometimes and other times the irq > storm happens like with auto cmd12 enabled - always after the first reboot. > So it seems auto cmd12 is not the real reason for the error. > > Do you also encounter the second error later on (for me in udev stage): > > mmcblk1boot0: retrying using single block read > > mmc1: ADMA error > > mmcblk1boot0: error -5 transferring data, sector 448, nr 32, card status > > 0x900 > > end_request: I/O error, dev mmcblk1boot0, sector 448 > > Buffer I/O error on device mmcblk1boot0, logical block 56 > > mmcblk1boot1: retrying using single block read > > mmc1: ADMA error > > mmcblk1boot1: error -5 transferring data, sector 448, nr 32, card status > > 0x900 > > end_request: I/O error, dev mmcblk1boot1, sector 448 > > I recently came back from vacation (which is why I didn't pitch in before). Has there been any further update on this? I want to exclude my EMMC partitioning changes as the possible culprit here. A -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
