At http://dev.laptop.org/ticket/10748 we are seeing a case of the libertas firmware randomly stopping responding to commands after resume. Careful monitoring of communications indicates a firmware or hardware bug, which has been reported to Marvell. Work around this issue by adding a reset_card method; this is automatically called when command timeouts are detected and provides an instant recovery to this situation. Signed-off-by: Daniel Drake <dsd@xxxxxxxxxx> --- drivers/net/wireless/libertas/if_sdio.c | 34 +++++++++++++++++++++++++++++++ 1 files changed, 34 insertions(+), 0 deletions(-) linux-mmc: any comments on this? is there a better way to do it? We do want a full card reset where everything is properly removed and re-probed, so that userspace knows to reprogram wifi security keys, re-establish connections, etc. diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index a7b5cb0..13c9dbe 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -892,6 +892,37 @@ static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv) } +static struct mmc_host *reset_host; + +static void if_sdio_reset_card_worker(struct work_struct *work) +{ + /* + * The actual reset operation must be run outside of lbs_thread. This + * is because mmc_remove_host() will cause the device to be instantly + * destroyed, and the libertas driver then needs to end lbs_thread, + * leading to a deadlock. + * + * We run it in a workqueue totally independent from the if_sdio_card + * instance for that reason. + */ + + lbs_pr_info("Resetting card..."); + mmc_remove_host(reset_host); + mmc_add_host(reset_host); +} +static DECLARE_WORK(card_reset_work, if_sdio_reset_card_worker); + +static void if_sdio_reset_card(struct lbs_private *priv) +{ + struct if_sdio_card *card = priv->card; + + if (work_pending(&card_reset_work)) + return; + + reset_host = card->func->card->host; + schedule_work(&card_reset_work); +} + /*******************************************************************/ /* SDIO callbacks */ /*******************************************************************/ @@ -1069,6 +1100,7 @@ static int if_sdio_probe(struct sdio_func *func, priv->enter_deep_sleep = if_sdio_enter_deep_sleep; priv->exit_deep_sleep = if_sdio_exit_deep_sleep; priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup; + priv->reset_card = if_sdio_reset_card; sdio_claim_host(func); @@ -1290,6 +1322,8 @@ static void __exit if_sdio_exit_module(void) /* Set the flag as user is removing this module. */ user_rmmod = 1; + cancel_work_sync(&card_reset_work); + sdio_unregister_driver(&if_sdio_driver); lbs_deb_leave(LBS_DEB_SDIO); -- 1.7.5.2 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
