[v6 5/5] MMC: SDHCI AutoCMD23 support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enables Auto-CMD23 support where available (SDHCI 3.0 controllers)

Cc: arindam.nath@xxxxxxx
Cc: cjb@xxxxxxxxxx
Cc: arnd@xxxxxxxx
Cc: subhashj@xxxxxxxxxxxxxx
Cc: malchev@xxxxxxxxxx
Tested-by: Arindam Nath <arindam.nath@xxxxxxx>
Signed-off-by: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci.c  |   17 ++++++++++++++++-
 drivers/mmc/host/sdhci.h  |    2 ++
 include/linux/mmc/sdhci.h |    1 +
 3 files changed, 19 insertions(+), 1 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 3a53512..fbb1842 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -860,7 +860,13 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 		if (!host->mrq->sbc &&
 		    host->flags & SDHCI_AUTO_CMD12)
 			mode |= SDHCI_TRNS_AUTO_CMD12;
+		else if (host->mrq->sbc &&
+			 host->flags & SDHCI_AUTO_CMD23) {
+			mode |= SDHCI_TRNS_AUTO_CMD23;
+			sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2);
+		}
 	}
+
 	if (data->flags & MMC_DATA_READ)
 		mode |= SDHCI_TRNS_READ;
 	if (host->flags & SDHCI_REQ_USE_DMA)
@@ -1255,7 +1261,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 			host->mrq = mrq;
 		}
 
-		if (mrq->sbc)
+		if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
 			sdhci_send_command(host, mrq->sbc);
 		else
 			sdhci_send_command(host, mrq->cmd);
@@ -2491,6 +2497,15 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
 		host->flags |= SDHCI_AUTO_CMD12;
 
+	/* Auto-CMD23 stuff only works in ADMA or PIO. */
+	if ((host->version == SDHCI_SPEC_300) &&
+	    ((host->flags & SDHCI_USE_ADMA) ||
+	     !(host->flags & SDHCI_REQ_USE_DMA))) {
+		host->flags |= SDHCI_AUTO_CMD23;
+		printk(KERN_INFO "%s: Auto-CMD23 available\n", mmc_hostname(mmc));
+	} else
+		printk(KERN_INFO "%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc));
+
 	/*
 	 * A controller may support 8-bit width, but the board itself
 	 * might not have the pins brought out.  Boards that support
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 2c3fbc5..745c42f 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -25,6 +25,7 @@
  */
 
 #define SDHCI_DMA_ADDRESS	0x00
+#define SDHCI_ARGUMENT2		SDHCI_DMA_ADDRESS
 
 #define SDHCI_BLOCK_SIZE	0x04
 #define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
@@ -37,6 +38,7 @@
 #define  SDHCI_TRNS_DMA		0x01
 #define  SDHCI_TRNS_BLK_CNT_EN	0x02
 #define  SDHCI_TRNS_AUTO_CMD12	0x04
+#define  SDHCI_TRNS_AUTO_CMD23	0x08
 #define  SDHCI_TRNS_READ	0x10
 #define  SDHCI_TRNS_MULTI	0x20
 
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 73e27ba..6a68c4e 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -114,6 +114,7 @@ struct sdhci_host {
 #define SDHCI_SDR50_NEEDS_TUNING (1<<4)	/* SDR50 needs tuning */
 #define SDHCI_NEEDS_RETUNING	(1<<5)	/* Host needs retuning */
 #define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
+#define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
 
 	unsigned int version;	/* SDHCI spec. version */
 
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux