[PATCH v2 1/4] sdhci add hooks for UHS setting by platform specific code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Philip Rakity <prakity@xxxxxxxxxxx>

Allow platform specific code to set UHS registers if
implementation requires speciial platform specific handling

Signed-off-by: Philip Rakity <prakity@xxxxxxxxxxx>
Reviewed-by: Arindam Nath <arindam.nath@xxxxxxx>
---
 drivers/mmc/host/sdhci.c |   33 ++++++++++++++++++---------------
 drivers/mmc/host/sdhci.h |    2 ++
 2 files changed, 20 insertions(+), 15 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index fa33016..cc63f5e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1346,27 +1346,30 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			sdhci_set_clock(host, clock);
 		}
 
-		ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
-		/* Select Bus Speed Mode for host */
-		ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
-		if (ios->timing == MMC_TIMING_UHS_SDR12)
-			ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
-		else if (ios->timing == MMC_TIMING_UHS_SDR25)
-			ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
-		else if (ios->timing == MMC_TIMING_UHS_SDR50)
-			ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
-		else if (ios->timing == MMC_TIMING_UHS_SDR104)
-			ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
-		else if (ios->timing == MMC_TIMING_UHS_DDR50)
-			ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
 
 		/* Reset SD Clock Enable */
 		clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
 		clk &= ~SDHCI_CLOCK_CARD_EN;
 		sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 
-		sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+		if (host->ops->set_uhs_signaling)
+			host->ops->set_uhs_signaling(host, ios->timing);
+		else {
+			ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+			/* Select Bus Speed Mode for host */
+			ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+			if (ios->timing == MMC_TIMING_UHS_SDR12)
+				ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+			else if (ios->timing == MMC_TIMING_UHS_SDR25)
+				ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+			else if (ios->timing == MMC_TIMING_UHS_SDR50)
+				ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+			else if (ios->timing == MMC_TIMING_UHS_SDR104)
+				ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+			else if (ios->timing == MMC_TIMING_UHS_DDR50)
+				ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+			sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+		}
 
 		/* Re-enable SD Clock */
 		clock = host->clock;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 8ea11b7..7e28eec 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -270,6 +270,8 @@ struct sdhci_ops {
 	unsigned int    (*get_ro)(struct sdhci_host *host);
 	void	(*platform_reset_enter)(struct sdhci_host *host, u8 mask);
 	void	(*platform_reset_exit)(struct sdhci_host *host, u8 mask);
+	int	(*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
+
 };
 
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux