Hi Chris.. My question is others..I agreed the using frequency table.. But my questions is this... For example, if f_min is 300KHz, you can the below message. mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz In other words, first init card with 400KHZ, but second/third to init with 300KHz. i think not necessary that try to initialize the two times with 300KHz. I want to know your opinion.. Regards, Jaehoon Chung Chris Ball wrote: > Hi, > > On Thu, May 12 2011, Huang Changming-R66093 wrote: >> The required min frequency (f_min) is 400KHz during identify stage, is >> it necessary to use the frequency table (freqs[], including 300KHz, >> 200KHz and 100KHz)? > > Yes. Some hardware is buggy/out of compliance with the spec. > > - Chris. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
