eMMC chips do not use CMD11 when changing voltage. Add extra
argument to call to indicate if CMD11 needs to be sent.
Signed-off-by: Philip Rakity <prakity@xxxxxxxxxxx>
Reviewed-by: Arindam Nath <arindam.nath@xxxxxxx>
---
drivers/mmc/core/core.c | 4 ++--
drivers/mmc/core/core.h | 3 ++-
drivers/mmc/core/sd.c | 4 ++--
3 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 78a9b51..74b4409 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -942,7 +942,7 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
return ocr;
}
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, int cmd11)
{
struct mmc_command cmd;
int err = 0;
@@ -953,7 +953,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
* Send CMD11 only if the request is to switch the card to
* 1.8V signalling.
*/
- if (signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
+ if ((signal_voltage != MMC_SIGNAL_VOLTAGE_330) && cmd11) {
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = SD_SWITCH_VOLTAGE;
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 93f3397..3c11e17 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -41,7 +41,8 @@ void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width,
unsigned int ddr);
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage,
+ int cmd11);
void mmc_set_timing(struct mmc_host *host, unsigned int timing);
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 851c8fc..d2a05ab 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -731,7 +731,7 @@ try_again:
*/
if (!mmc_host_is_spi(host) && rocr &&
((*rocr & 0x41000000) == 0x41000000)) {
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, 1);
if (err) {
ocr &= ~SD_OCR_S18R;
goto try_again;
@@ -1104,7 +1104,7 @@ int mmc_attach_sd(struct mmc_host *host)
WARN_ON(!host->claimed);
/* Make sure we are at 3.3V signalling voltage */
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
if (err)
return err;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
