On Thu, Mar 10, 2011 at 05:07:17PM +0900, Magnus Damm wrote: > Hi Simon, > > On Thu, Mar 10, 2011 at 4:58 PM, Simon Horman <horms@xxxxxxxxxxxx> wrote: > > This allows a ROM-able zImage to be written to eSD and for SuperH Mobile > > ARM to boot directly from the SDHI hardware block. > > > > This is achieved by the MaskROM loading the first portion of the image into > > MERAM and then jumping to it. ÂThis portion contains loader code which > > copies the entire image to SDRAM and jumps to it. From there the zImage > > boot code proceeds as normal, uncompressing the image into its final > > location and then jumping to it. > > > > Cc: Magnus Damm <magnus.damm@xxxxxxxxx> > > Cc: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> > > Signed-off-by: Simon Horman <horms@xxxxxxxxxxxx> > > Nice to see some SDHI loader code! > > > --- /dev/null > > +++ b/arch/arm/boot/compressed/sdhi-shmobile.c > > > +#define PORT179CR Â Â Â0xe60520b3 > > +#define PORT180CR Â Â Â0xe60520b4 > > +#define PORT181CR Â Â Â0xe60520b5 > > +#define PORT182CR Â Â Â0xe60520b6 > > +#define PORT183CR Â Â Â0xe60520b7 > > +#define PORT184CR Â Â Â0xe60520b8 > > + > > +#define SMSTPCR3 Â Â Â 0xe615013c > > +#define SDGENCNTA Â Â Â0xfe40009c > > These... > > > + Â Â Â /* Initialise SDHI1 */ > > + Â Â Â /* PORT184CR: GPIO_FN_SDHICMD1 Control */ > > + Â Â Â __raw_writeb(CR_FUNCTION1, PORT184CR); > > + Â Â Â /* PORT179CR: GPIO_FN_SDHICLK1 Control */ > > + Â Â Â __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR); > > + Â Â Â /* PORT181CR: GPIO_FN_SDHID1_3 Control */ > > + Â Â Â __raw_writeb(CR_FUNCTION1, PORT183CR); > > + Â Â Â /* PORT182CR: GPIO_FN_SDHID1_2 Control */ > > + Â Â Â __raw_writeb(CR_FUNCTION1, PORT182CR); > > + Â Â Â /* PORT183CR: GPIO_FN_SDHID1_1 Control */ > > + Â Â Â __raw_writeb(CR_FUNCTION1, PORT181CR); > > + Â Â Â /* PORT180CR: GPIO_FN_SDHID1_0 Control */ > > + Â Â Â __raw_writeb(CR_FUNCTION1, PORT180CR); > > + > > + Â Â Â /* Enable clock to SDHI1 hardware block */ > > + Â Â Â __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3); > > ...and these are sh7372 specific. > > If possible I'd like to reuse your SDHI code on sh73a0, so please > consider splitting up the code in a SDHI specific portion and in a > processor specific portion. Sure. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
