Re: [linux-pm] [RFC,PATCHv3 0/3] sdhci runtime_pm implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday, March 02, 2011, Pierre Tardy wrote:
> On Tue, Mar 1, 2011 at 10:07 PM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> > On Tuesday, March 01, 2011, Pierre Tardy wrote:
> >> On Tue, Mar 1, 2011 at 8:33 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
> >> > On Tue, 1 Mar 2011, Pierre Tardy wrote:
> >> >
> >> >> Please find sdhci runtime_pm implementation.
> >> >>
> >> >> It uses clock gating fw as a tip to know when our chip is idle.
> >> >> It implements wake up from card insertion/removal.
> >> >>
> >> >> This is RFC, please dont merge yet. I really would like to have deep review
> >> >> from PCI linux-pm guys.
> >> >>
> >> >> Opens are:
> >> >>
> >> >> 1/ Not sure if the pci configs in the driver in rpm_suspend/resume flow
> >> >>  are not duplicate from what the core is doing.
> >> >
> >> > There may be one or two small errors.
> >> >
> >> >> 2/ Wakeup from D3hot: I cannot find any driver that is implementing it in current upstream,
> >> >
> >> > Other drivers do it, but they use PCI PME# instead of interrupts.
> >> Could you please elaborate?
> >> My understanding is that PCI PME will generate MSI, which translate in
> >> interrupt.
> >
> > Your driver won't get those interrupts.
> >
> > How it works is, basically, that when the device signals wakeup, it either
> > causes a PME# signal to be raised (parallel PCI), or a PME Message to be
> > sent upstream (PCIe).  In the first case it will cause a platform event
> > (eg. ACPI GPE) to occur and the handle of that event will resume your
> > device (using pm_request_resume()).  In the second case it will cause the PCIe
> > root port handling the PME Message to generate an interrupt and the handler of
> > that interrupt will resume your device.
> Thanks, that explain a lot how it works.
> What I still dont understand is that the wake source I'll have (e.g.
> sd card insert) is still an interrupt source.
> So it is supposed to generate interrupt until the interrupt source is
> acknowledged.
> Are we supposed to mask that interrupt source while suspended to make
> sure we have either wake or interrupt?

I think the interrupt should be masked while suspended and the driver's resume
routine should unmask it.

Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux