Re: [PATCH 1/1]mmc: set timeout for SDHCI host before sending busy cmd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

This patch looks like this. I sent to the RFC patch..

http://marc.info/?l=linux-mmc&m=129109794815028&w=3

Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
 Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>

---
 drivers/mmc/host/sdhci.c  |    6 +++++-
 include/linux/mmc/sdhci.h |    3 ++-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 782c0ee..3b93d97 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -655,8 +655,12 @@ static void sdhci_prepare_data(struct sdhci_host
*host, struct mmc_data *data)

       WARN_ON(host->data);

-       if (data == NULL)
+       if (data == NULL) {
+               if ((host->quirks & SDHCI_QUIRK_SET_DATA_TIMEOUT_VAL) &&
+                               (host->cmd->flags & MMC_RSP_BUSY))
+                       sdhci_writel(host, 0xE, SDHCI_TIMEOUT_CONTROL);
               return;
+       }

       /* Sanity checks */
       BUG_ON(data->blksz * data->blocks > 524288);
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 1fdc673..315ff49 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -83,7 +83,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12             (1<<28)
 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
 #define SDHCI_QUIRK_NO_HISPD_BIT                       (1<<29)
-
+/* Controller need set data timeout value when card is busy */
+#define SDHCI_QUIRK_SET_DATA_TIMEOUT_VAL               (1<<30)
       int irq;                /* Device IRQ */
       void __iomem *ioaddr;   /* Mapped address */

--
1.6.0.4

2011/2/24 Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>:
> Set the timeout control register for SDHCI host when it needs to send some
> commands which need busy signal. Use the maximum timeout value will be safe.
>
> Signed-off-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci.c |   14 ++++++++++----
>  1 files changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 9e15f41..32b7475 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -40,7 +40,6 @@
>
>  static unsigned int debug_quirks = 0;
>
> -static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
>  static void sdhci_finish_data(struct sdhci_host *);
>
>  static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
> @@ -651,16 +650,23 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
>                sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
>  }
>
> -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
> +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
>  {
>        u8 count;
>        u8 ctrl;
> +       struct mmc_data *data = cmd->data;
>        int ret;
>
>        WARN_ON(host->data);
>
> -       if (data == NULL)
> +       if (data == NULL) {
> +               /*
> +                * set timeout to be maximum value for command with busy signal.
> +                */
> +               if (cmd->flags & MMC_RSP_BUSY)
> +                       sdhci_writeb(host, 0xE, SDHCI_TIMEOUT_CONTROL);
>                return;
> +       }
>
>        /* Sanity checks */
>        BUG_ON(data->blksz * data->blocks > 524288);
> @@ -920,7 +926,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
>
>        host->cmd = cmd;
>
> -       sdhci_prepare_data(host, cmd->data);
> +       sdhci_prepare_data(host, cmd);
>
>        sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
>
> --
> 1.6.6.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux