need ability to set f_max independent of max_clk.
We cannot use the quirk SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN
since the clock is not broken and on mmp2 is fixed at 200MHz.
On some pxa platforms and changing this value
a) does not work
b) causes bad clock dividers
c) mmc errors
On other platforms defining
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN is the right thing to do
(pxa168 and pxa910) since the clock is configured via system
registers and not known via the CAPABILITY Register.
Signed-off-by: Philip Rakity <prakity@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 8 +++++++-
drivers/mmc/host/sdhci.h | 1 +
2 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7207b57..6d774cc 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1945,7 +1945,13 @@ int sdhci_add_host(struct sdhci_host *host)
else
mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
- mmc->f_max = host->max_clk;
+ if (host->ops->get_f_max_clock) {
+ mmc->f_max = host->ops->get_f_max_clock(host);
+ if (mmc->f_max > host->max_clk)
+ mmc->f_max = host->max_clk;
+ } else
+ mmc->f_max = host->max_clk;
+
mmc->caps |= MMC_CAP_SDIO_IRQ;
/*
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 4f62505..2477118 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -224,6 +224,7 @@ struct sdhci_ops {
unsigned int (*get_ro)(struct sdhci_host *host);
void (*platform_reset_enter)(struct sdhci_host *host, u8 mask);
void (*platform_reset_exit)(struct sdhci_host *host, u8 mask);
+ unsigned int (*get_f_max_clock)(struct sdhci_host *host);
};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
