Patch set 4/12 [PATCH 1/5] sdhci: sdhci-pxa.c: delete clk gating code - not correct clock gating is using wrong registers for mmp2 SoC sdhc-pxa.c is not generic for pxa family. [PATCH 2/5] sdhci: sdhci-pxa.c ensure clocks are enabled on all SD controllers Do not rely on u-boot to do the right thing. It does not. Do not disable the system clock to the device as this may hang the system if the register is touched [PATCH 3/5] sdhci: sdhci-pxa.c enable CAP support for cards marked permanent eMMC and Wifi cards that are fixed to the board are marked permanent in the developemnt board files (eg brownstone.c for mmp2) The platform specific code nows informs the mmc layer about this. [PATCH 4/5] sdhci: sdhci-pxa.c: Enable BUS WIDTH testing for MMC/eMMC cards The PXA family of controllers (PXA168/PXA910/MMP2) support CMD14/CMD19 transactions that are used to test the MMC/eMMC bus width for 1, 4, or 8 bits. Indicate to the mmc layer that it is safe to do bus width testing. [PATCH 5/5] sdhci: sdhci-pxa.c: Add QUIRKS for DMA/ADMA to match h/w 32 Bit DMA/ADMA Access 32 Bit Size Support ADMA End Descriptor in current chain (no need for dummy entry)-- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
