Support multiple sd/eMMC interfaces and PXA168 and MMP2 (brownstone) Patch set 2/12 [PATCH 1/5] arm: mach-mmp: SDH register definitions for (pxa168, pxa910, mmp2) Register definitions added for APMU registers for all platforms Definitions are platform dependent (not same for pxa168, pxz910, mmp2). [PATCH 2/5] arm: mach-mmp: mmp2.c uses revised APMU registers defines for APMU_CLK_OPS [PATCH 3/5] plat-pxa: sdhci.h define for PERMANENT SD/eMMC/SDIO cards [PATCH 4/5] mach-mmp: PXA168: support multiple SD controllers add support for pxa168 family for multiple sd controllers move board specific settings from mfp-pxa168.h to aspenite.c [PATCH 5/5] arm: mach-mmp: brownstone.c support multiple sd slots Support multiple sd/eMMC interfaces. enable mmc1, 2, and 3. mmc2 is used eMMC and slot is marked PERMANENT and 8 bit device. mmc1 is used for Wifi and slot is marked PERMANENT Note: eMMC (mmc2) is set to initialize first to workaround a problem where booting in logical order requires mmc create work queue to be multi-threaded otherwise boot process hangs. BUG report send to linux-mmc and linux-kernel mailing list.-- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
