Hi,
Shawn Guo writes:
> Hi Lothar,
>
> On Wed, Feb 09, 2011 at 08:46:18AM +0100, Lothar WaÃmann wrote:
> > Hi Shawn,
> >
> > Shawn Guo writes:
> > > This adds the mmc host driver for Freescale MXS-based SoC i.MX23/28.
> > > The driver calls into mxs-dma via generic dmaengine api for both pio
> > > and data transfer.
> > >
> > > Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
> > > ---
> > > arch/arm/mach-mxs/include/mach/mmc.h | 15 +
> > > drivers/mmc/host/Kconfig | 9 +
> > > drivers/mmc/host/Makefile | 1 +
> > > drivers/mmc/host/mxs-mmc.c | 884 ++++++++++++++++++++++++++++++++++
> > > 4 files changed, 909 insertions(+), 0 deletions(-)
> > > create mode 100644 arch/arm/mach-mxs/include/mach/mmc.h
> > > create mode 100644 drivers/mmc/host/mxs-mmc.c
> > >
> > I've run the mmc-test kernel module with this driver on our TX28
> > module which fails in the following tests:
> > |mmc0: Test case 15. Correct xfer_size at write (start failure)...
> > |mmc0: Result: ERROR (-110)
> > |mmc0: Test case 16. Correct xfer_size at read (start failure)...
> > |mmc0: Result: ERROR (-110)
> > |mmc0: Test case 17. Correct xfer_size at write (midway failure)...
> > |mmc0: Result: ERROR (-110)
> > |mmc0: Test case 18. Correct xfer_size at read (midway failure)...
> > |mmc0: Result: ERROR (-110)
> >
> > Could you try the test on your hardware?
> >
> I'm new to this test. I enabled MMC_TEST but did not see "test"
> under /sys for mmc. Can you please elaborate how to launch this
> test? Thanks.
>
You need debugfs mounted and the mmc-test module loaded.
An inserted card will normally be grabbed by the mmc-block driver. You
can 'unbind' the driver and 'bind' it to the mmc-test driver using the
corresponding entries in sysfs. The mmc-test driver can be controlled
via debugfs.
The following script steals an inserted card from the mmc-block driver
and performs all mmc-test testcases (TRASHING THE CONTENTS OF THE
CARD!).
<--------
#!/bin/bash
drv_path=/sys/bus/mmc/drivers
dbg_path=/sys/kernel/debug
testdrv=mmc_test
shopt -s nullglob
card=""
cleanup() {
if [ -n "$card" -a -n "$driver" -a "$driver" != "$testdrv" ];then
echo "Restoring driver $driver"
echo "$card" > "$drv_path/$testdrv/unbind"
echo "$card" > "$drv_path/$driver/bind"
fi
}
trap cleanup 0
set -e
cd "$drv_path"
for d in *;do
for l in "$d/"*;do
[ -h "$l" ] || continue
card="$(basename "$l")"
driver="$(dirname "$l")"
break
done
[ -n "$card" ] && break
done
if [ -z "$card" ];then
echo "No MMC/SD card found"
exit 1
fi
if [ "$driver" != "$testdrv" ];then
echo "Trying to claim card $card from driver $driver"
echo "$card" > "$drv_path/$driver/unbind"
echo "$card" > "$drv_path/$testdrv/bind"
fi
echo "WARNING: Card $card will be overwritten!"
echo "Hit <ENTER> to continue; <CTRL-C> to abort"
read
# perform all testcases (> 0 for individual tests)
echo 0 > "$dbg_path/${card%:*}/$card/test"
>--------
Lothar WaÃmann
--
___________________________________________________________
Ka-Ro electronics GmbH | PascalstraÃe 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
GeschÃftsfÃhrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@xxxxxxxxxxxxxxxxxxx
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
