Hi Chuanxiao,
On Thu, Jan 13, 2011 at 08:57:27PM +0800, Chuanxiao Dong wrote:
> Enhanced area feature is a new feature defined in eMMC4.4 standard. This
> kind of area can help to improve the performance.
>
> MMC driver will read out the enhanced area offset and size and add them
> to be device attributes. The feature enabling should be done in manufactory.
> To use this feature, bit ERASE_GRP_DEF should also be set.
>
> Documentation/ABI/testing/sysfs-devices-mmc described the two new attributes
>
> Signed-off-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
Thanks for the explanation of your use case, this patch looks good.
Just a few more comments:
> ---
> Documentation/ABI/testing/sysfs-devices-mmc | 19 +++++++
> drivers/mmc/core/mmc.c | 73 +++++++++++++++++++++++++++
> include/linux/mmc/card.h | 3 +
> include/linux/mmc/mmc.h | 3 +
> 4 files changed, 98 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/ABI/testing/sysfs-devices-mmc
>
> diff --git a/Documentation/ABI/testing/sysfs-devices-mmc b/Documentation/ABI/testing/sysfs-devices-mmc
> new file mode 100644
> index 0000000..f0fb053
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-devices-mmc
> @@ -0,0 +1,19 @@
> +What: /sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_offset
> +Date: January 2011
> +Contact: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
> +Description:
> + Enhanced area is a new feature defined in eMMC4.4 standard.
> + eMMC4.4 or later card can support such feature. This kind of area
> + can help to improve the card performance. If the feature is enabled,
> + this attribute will indicate the start address of enhanced data
> + area. If not, this attribute will be 0. Unit Byte.
> +
> +What: /sys/devices/.../mmc_host/mmcX/mmcX:XXXX/enhanced_area_size
> +Date: January 2011
> +Contact: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
> +Description:
> + Enhanced area is a new feature defined in eMMC4.4 standard.
> + eMMC4.4 or later card can support such feature. This kind of area
> + can help to improve the card performance. If the feature is enabled,
> + this attribute will indicate the size of enhanced data area. If not,
> + this attribute will be 0. Unit KBytes.
Please wrap the above at 80 chars.
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 16006ef..c8b5b3b 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -302,6 +302,41 @@ static int mmc_read_ext_csd(struct mmc_card *card)
> }
>
> if (card->ext_csd.rev >= 4) {
> + /*
> + * Enhanced area feature support
> + * check whether eMMC card is enabled enhanced area,
check whether eMMC card has the Enhanced Area enabled
> + * if so, export enhanced area offset and size to
> + * user by adding sysfs interface
> + */
> + if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
> + (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
> + u8 hc_erase_grp_sz =
> + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
> + u8 hc_wp_grp_sz =
> + ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
> + /*
> + * set a flag to identify whether the enhanced
> + * user data are enabled
enhanced user data area is enabled
> + */
> + card->ext_csd.enhanced_area_en = 1;
> + /*
> + * caculate the enhanced data area offset, unit B
calculate
> + */
> + card->ext_csd.enhanced_area_offset =
> + (ext_csd[139] << 24) + (ext_csd[138] << 16) +
> + (ext_csd[137] << 8) + ext_csd[136];
> + if (mmc_card_blockaddr(card))
> + card->ext_csd.enhanced_area_offset <<= 9;
> + /*
> + * caculate the enhanced data area size, unit KB
> + */
> + card->ext_csd.enhanced_area_size =
> + (ext_csd[142] << 16) + (ext_csd[141] << 8) +
> + ext_csd[140];
> + card->ext_csd.enhanced_area_size *=
> + (size_t)(hc_erase_grp_sz * hc_wp_grp_sz);
> + card->ext_csd.enhanced_area_size <<= 9;
> + }
> card->ext_csd.sec_trim_mult =
> ext_csd[EXT_CSD_SEC_TRIM_MULT];
> card->ext_csd.sec_erase_mult =
> @@ -336,6 +371,9 @@ MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
> MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
> MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
> MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
> +MMC_DEV_ATTR(enhanced_area_offset, "0x%llxB\n",
> + card->ext_csd.enhanced_area_offset);
> +MMC_DEV_ATTR(enhanced_area_size, "0x%xKB\n", card->ext_csd.enhanced_area_size);
I think these should probably be printed in decimal instead of hex.
Hm, this way the sysfs files will show up regardless of whether we have
an eMMC device or an SD card, which is very confusing. Can you not check
whether enhanced_area_en == 1 before create these files?
>
> static struct attribute *mmc_std_attrs[] = {
> &dev_attr_cid.attr,
> @@ -349,6 +387,8 @@ static struct attribute *mmc_std_attrs[] = {
> &dev_attr_name.attr,
> &dev_attr_oemid.attr,
> &dev_attr_serial.attr,
> + &dev_attr_enhanced_area_offset.attr,
> + &dev_attr_enhanced_area_size.attr,
> NULL,
> };
>
> @@ -484,6 +524,39 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> }
>
> /*
> + * If enhanced_area_en is TRUE, host need to enable
> + * ERASE_GRP_DEF bit.
> + * ERASE_GRP_DEF bit will be lost everytime
> + * after a reset or power off.
> + */
> + if (card->ext_csd.enhanced_area_en) {
> + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> + EXT_CSD_ERASE_GROUP_DEF, 1);
> +
> + if (err && err != -EBADMSG)
> + goto free_card;
> +
> + if (err) {
> + err = 0;
> + /*
> + * Just disable enhanced area off & sz
> + * will try to enable ERASE_GROUP_DEF
> + * during next time reinit
> + */
> + card->ext_csd.enhanced_area_offset = 0;
> + card->ext_csd.enhanced_area_size = 0;
It makes more sense to me to return -EINVAL instead of 0 if we know
nothing about the enhanced_area. What do you think?
> + } else {
> + card->ext_csd.erase_group_def = 1;
> + /*
> + * enable ERASE_GRP_DEF successfully.
> + * This will affect the erase size, so
> + * here need to reset erase size
> + */
> + mmc_set_erase_size(card);
> + }
> + }
> +
> + /*
> * Activate high speed (if supported)
> */
> if ((card->ext_csd.hs_max_dtr != 0) &&
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index 8ce0827..cc9a07e 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -54,6 +54,9 @@ struct mmc_ext_csd {
> unsigned int sec_trim_mult; /* Secure trim multiplier */
> unsigned int sec_erase_mult; /* Secure erase multiplier */
> unsigned int trim_timeout; /* In milliseconds */
> + bool enhanced_area_en; /* enhanced area enable bit */
> + loff_t enhanced_area_offset; /* enhanced area addr */
> + size_t enhanced_area_size; /* enhanced area size */
Think you need another tab to get these to line up.
> };
>
> struct sd_scr {
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 612301f..c50ede6 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -253,6 +253,8 @@ struct _mmc_csd {
> * EXT_CSD fields
> */
>
> +#define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
This isn't lined up properly either.
> +#define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
> #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
> #define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
> #define EXT_CSD_BUS_WIDTH 183 /* R/W */
> @@ -262,6 +264,7 @@ struct _mmc_csd {
> #define EXT_CSD_CARD_TYPE 196 /* RO */
> #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
> #define EXT_CSD_S_A_TIMEOUT 217 /* RO */
> +#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
> #define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
> #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
> #define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
Thanks,
--
Chris Ball <cjb@xxxxxxxxxx> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
