This patch is Mobile Storage Controller interface.
This controller is similar to SDHCI.(This patch is based on sdhci.c)
I tried to use mobile storage with sdhci-controller, but bit controlling is too many different
So need Mobile Storage controller.
I tested only 8-bit buswidth. It's working well...i think performance didn't ensure yet.
It should be add DDR feature.
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
drivers/mmc/host/Kconfig | 12 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/mshci.c | 1499 +++++++++++++++++++++++++++++++++++++++++++++
drivers/mmc/host/mshci.h | 364 +++++++++++
4 files changed, 1876 insertions(+), 0 deletions(-)
create mode 100644 drivers/mmc/host/mshci.c
create mode 100644 drivers/mmc/host/mshci.h
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index d618e86..59a6057 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -24,6 +24,18 @@ config MMC_PXA
If unsure, say N.
+config MMC_MSHCI
+ tristate "Mobile Storage Host Controller Interface support"
+ depends on HAS_DMA
+ help
+ This selects the Mobile Storage Host Controller Interface.
+ If support SD/MMC card.
+
+ If you have a controller with this interface, say Y or M here. You
+ also need to enable an appropriate bus interface.
+
+ If unsure, say N.
+
config MMC_SDHCI
tristate "Secure Digital Host Controller Interface support"
depends on HAS_DMA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 7b645ff..2cf4be0 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
obj-$(CONFIG_MMC_MSM) += msm_sdcc.o
+obj-$(CONFIG_MMC_MSHCI) += mshci.o
obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o
obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
diff --git a/drivers/mmc/host/mshci.c b/drivers/mmc/host/mshci.c
new file mode 100644
index 0000000..57cc040
--- /dev/null
+++ b/drivers/mmc/host/mshci.c
@@ -0,0 +1,1499 @@
+/*
+ * linux/drivers/mmc/host/mshci.c - Mobile Storage Host Controller Interface driver
+ *
+ * Copyright (C) 2011 Samsung Electronics, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ */
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/leds.h>
+
+#include <linux/mmc/host.h>
+
+#include "mshci.h"
+
+#define DRIVER_NAME "mshci"
+
+#define DBG(f, x...) \
+ pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x)
+
+static unsigned int debug_quirks;
+
+static void mshci_prepare_data(struct mshci_host *, struct mmc_data *);
+static void mshci_finish_data(struct mshci_host *);
+
+static void mshci_send_command(struct mshci_host *, struct mmc_command *);
+static void mshci_finish_command(struct mshci_host *);
+
+
+static void mshci_dumpregs(struct mshci_host *host)
+{
+ /* ToDo */
+}
+
+
+/*****************************************************************************\
+ * *
+ * Low level functions *
+ * *
+\*****************************************************************************/
+
+static void mshci_clear_set_irqs(struct mshci_host *host, u32 clear, u32 set)
+{
+ u32 ier;
+
+ ier = mshci_readl(host, MSHCI_INTMSK);
+ ier &= ~clear;
+ ier |= set;
+ mshci_writel(host, ier, MSHCI_INTMSK);
+}
+
+static void mshci_unmask_irqs(struct mshci_host *host, u32 irqs)
+{
+ mshci_clear_set_irqs(host, 0, irqs);
+}
+
+static void mshci_mask_irqs(struct mshci_host *host, u32 irqs)
+{
+ mshci_clear_set_irqs(host, irqs, 0);
+}
+
+static void mshci_set_card_detection(struct mshci_host *host, bool enable)
+{
+ u32 irqs = INTMSK_CDETECT;
+
+ if (enable)
+ mshci_unmask_irqs(host, irqs);
+ else
+ mshci_mask_irqs(host, irqs);
+}
+
+static void mshci_enable_card_detection(struct mshci_host *host)
+{
+ mshci_set_card_detection(host, true);
+}
+
+static void mshci_disable_card_detection(struct mshci_host *host)
+{
+ mshci_set_card_detection(host, false);
+}
+
+static void mshci_reset(struct mshci_host *host, u8 mask)
+{
+ u32 timeout = 100;
+ u32 ier;
+
+ ier = mshci_readl(host, MSHCI_CTRL);
+ ier |= mask;
+
+ mshci_writel(host, ier, MSHCI_CTRL);
+ while (mshci_readl(host, MSHCI_CTRL) & DMA_RESET) {
+ if (timeout == 0) {
+ printk(KERN_ERR "%s: Reset never completed.\n",
+ mmc_hostname(host->mmc));
+ mshci_dumpregs(host);
+ return;
+ }
+ timeout--;
+ mdelay(1);
+ }
+}
+
+static void mshci_init(struct mshci_host *host)
+{
+ mshci_reset(host, RESET_ALL);
+
+ /* clear interrupt status */
+ mshci_writel(host, INTMSK_ALL, MSHCI_RINTSTS);
+
+ mshci_clear_set_irqs(host, INTMSK_ALL,
+ INTMSK_CDETECT | INTMSK_RE |
+ INTMSK_CDONE | INTMSK_DTO | INTMSK_TXDR | INTMSK_RXDR |
+ INTMSK_RCRC | INTMSK_DCRC | INTMSK_RTO | INTMSK_DRTO |
+ INTMSK_HTO | INTMSK_FRUN | INTMSK_HLE | INTMSK_SBE |
+ INTMSK_EBE);
+}
+
+static void mshci_reinit(struct mshci_host *host)
+{
+ mshci_init(host);
+ mshci_enable_card_detection(host);
+}
+
+/*****************************************************************************\
+ * *
+ * Core functions *
+ * *
+\*****************************************************************************/
+
+static void mshci_read_block_pio(struct mshci_host *host)
+{
+ unsigned long flags;
+ size_t fifo_cnt, len;
+ u32 uninitialized_var(scratch);
+ u8 *buf;
+
+ DBG("PIO reading\n");
+
+ fifo_cnt = (mshci_readl(host, MSHCI_STATUS)&FIFO_COUNT) >> 17;
+ fifo_cnt *= FIFO_WIDTH;
+
+ if (fifo_cnt == 128)
+ fifo_cnt = 512;
+
+ local_irq_save(flags);
+
+ while (fifo_cnt) {
+ if (!sg_miter_next(&host->sg_miter))
+ BUG();
+
+ len = min(host->sg_miter.length, fifo_cnt);
+
+ fifo_cnt -= len;
+ host->sg_miter.consumed = len;
+
+ buf = host->sg_miter.addr;
+
+ while (len) {
+ scratch = mshci_readl(host, MSHCI_FIFODAT);
+
+ *buf = scratch & 0xFF;
+
+ *((u32 *)buf) = scratch;
+ buf += 4;
+ len -= 4;
+ }
+ }
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
+}
+
+static void mshci_write_block_pio(struct mshci_host *host)
+{
+ unsigned long flags;
+ size_t fifo_cnt, len, chunk;
+ u32 scratch;
+ u8 *buf;
+
+ DBG("PIO writing\n");
+
+ fifo_cnt = 64;
+
+ fifo_cnt *= FIFO_WIDTH;
+ chunk = 0;
+ scratch = 0;
+
+ local_irq_save(flags);
+
+ while (fifo_cnt) {
+ if (!sg_miter_next(&host->sg_miter)) {
+ /*
+ * Even though transfer is complete,
+ * TXDR interrupt occurs again.
+ * So, it has to check that it has really
+ * no next sg buffer or just DTO interrupt
+ * has not occured yet.
+ */
+ if ((host->data->blocks * host->data->blksz) ==
+ host->data_transfered)
+ break; /* transfer done but DTO not yet */
+ BUG();
+ }
+ len = min(host->sg_miter.length, fifo_cnt);
+
+ fifo_cnt -= len;
+ host->sg_miter.consumed = len;
+ host->data_transfered += len;
+
+ buf = (host->sg_miter.addr);
+
+ while (len) {
+ scratch |= (u32)*buf << (chunk * 8);
+
+ buf++;
+ chunk++;
+ len--;
+
+ if ((chunk == 4) || ((len == 0) && (fifo_cnt == 0))) {
+ mshci_writel(host, scratch, MSHCI_FIFODAT);
+ chunk = 0;
+ scratch = 0;
+ }
+ }
+ }
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
+}
+
+static void mshci_transfer_pio(struct mshci_host *host)
+{
+ BUG_ON(!host->data);
+
+ if (host->blocks == 0)
+ return;
+
+ if (host->data->flags & MMC_DATA_READ)
+ mshci_read_block_pio(host);
+ else
+ mshci_write_block_pio(host);
+
+ DBG("PIO transfer complete.\n");
+}
+
+static void mshci_set_mdma_desc(u8 *desc_vir, u8 *desc_phy,
+ u32 des0, u32 des1, u32 des2)
+{
+ ((struct mshci_idmac *)(desc_vir))->des[0] = des0;
+ ((struct mshci_idmac *)(desc_vir))->des[1] = des1;
+ ((struct mshci_idmac *)(desc_vir))->des[2] = des2;
+ ((struct mshci_idmac *)(desc_vir))->des[3] = (u32)desc_phy +
+ sizeof(struct mshci_idmac);
+}
+
+static int mshci_mdma_table_pre(struct mshci_host *host,
+ struct mmc_data *data)
+{
+ int direction;
+
+ u8 *desc_vir, *desc_phy;
+ dma_addr_t addr;
+ int len;
+
+ struct scatterlist *sg;
+ int i;
+ u32 des_flag;
+ u32 size_idmac = sizeof(struct mshci_idmac);
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+
+ host->sg_count = dma_map_sg(mmc_dev(host->mmc),
+ data->sg, data->sg_len, direction);
+ if (host->sg_count == 0)
+ goto fail;
+
+ desc_vir = host->idma_desc;
+
+ /* to know phy address */
+ host->idma_addr = dma_map_single(mmc_dev(host->mmc),
+ host->idma_desc, 128 * size_idmac, DMA_TO_DEVICE);
+ if (dma_mapping_error(mmc_dev(host->mmc), host->idma_addr))
+ goto unmap_entries;
+ BUG_ON(host->idma_addr & 0x3);
+
+ desc_phy = (u8 *)host->idma_addr;
+
+ for_each_sg(data->sg, sg, host->sg_count, i) {
+ addr = sg_dma_address(sg);
+ len = sg_dma_len(sg);
+
+ /* tran, valid */
+ des_flag = (MSHCI_IDMAC_OWN|MSHCI_IDMAC_CH);
+ des_flag |= (i == 0) ? MSHCI_IDMAC_FS : 0;
+
+ mshci_set_mdma_desc(desc_vir, desc_phy, des_flag, len, addr);
+ desc_vir += size_idmac;
+ desc_phy += size_idmac;
+
+ /*
+ * If this triggers then we have a calculation bug
+ * somewhere. :/
+ */
+ WARN_ON((desc_vir - host->idma_desc) > 128 * size_idmac);
+ }
+
+ /*
+ * Add a terminating flag.
+ */
+ ((struct mshci_idmac *)(desc_vir-size_idmac))->des[0] |= MSHCI_IDMAC_LD;
+
+ /* it has to dma map again to resync vir data to phy data */
+ host->idma_addr = dma_map_single(mmc_dev(host->mmc),
+ host->idma_desc, 128 * size_idmac, DMA_TO_DEVICE);
+ if (dma_mapping_error(mmc_dev(host->mmc), host->idma_addr))
+ goto unmap_entries;
+ BUG_ON(host->idma_addr & 0x3);
+
+ return 0;
+
+unmap_entries:
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+fail:
+ return -EINVAL;
+}
+
+static void mshci_idma_table_post(struct mshci_host *host,
+ struct mmc_data *data)
+{
+ int direction;
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+
+ dma_unmap_single(mmc_dev(host->mmc), host->idma_addr,
+ (128 * 2 + 1) * 4, DMA_TO_DEVICE);
+
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+}
+
+static u32 mshci_calc_timeout(struct mshci_host *host, struct mmc_data *data)
+{
+ return 0xffffffff; /* this value SHOULD be optimized */
+}
+
+static void mshci_set_transfer_irqs(struct mshci_host *host)
+{
+ u32 dma_irqs = INTMSK_DMA;
+ u32 pio_irqs = INTMSK_TXDR | INTMSK_RXDR;
+
+ if (host->flags & MSHCI_REQ_USE_DMA) {
+ /* Next codes are the W/A for DDR */
+ if (mshci_readl(host, MSHCI_UHS_REG) && (1 << 16))
+ dma_irqs |= INTMSK_DCRC;
+ /* clear interrupts for PIO */
+ mshci_clear_set_irqs(host, dma_irqs, 0);
+ } else {
+ /* Next codes are the W/A for DDR */
+ if (mshci_readl(host, MSHCI_UHS_REG) && (1 << 16))
+ mshci_clear_set_irqs(host, INTMSK_DCRC, pio_irqs);
+ else
+ mshci_clear_set_irqs(host, 0, pio_irqs);
+ }
+}
+
+static void mshci_prepare_data(struct mshci_host *host, struct mmc_data *data)
+{
+ u32 count;
+ u32 ret;
+
+ WARN_ON(host->data);
+
+ if (data == NULL)
+ return;
+
+ BUG_ON(data->blksz * data->blocks > (host->mmc->max_req_size *
+ host->mmc->max_segs));
+ BUG_ON(data->blksz > host->mmc->max_blk_size);
+ BUG_ON(data->blocks > 400000);
+
+ host->data = data;
+ host->data_early = 0;
+
+ count = mshci_calc_timeout(host, data);
+ mshci_writel(host, count, MSHCI_TMOUT);
+
+ mshci_reset(host, FIFO_RESET);
+
+ if (host->flags & (MSHCI_USE_IDMA))
+ host->flags |= MSHCI_REQ_USE_DMA;
+
+ /*
+ * FIXME: This doesn't account for merging when mapping the
+ * scatterlist.
+ */
+ if (host->flags & MSHCI_REQ_USE_DMA) {
+ /*
+ * mshc's IDMAC can't transfer data that is not aligned
+ * or has length not divided by 4 byte.
+ **/
+ int i;
+ struct scatterlist *sg;
+
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->length & 0x3) {
+ DBG("Reverting to PIO because of "
+ "transfer size (%d)\n",
+ sg->length);
+ host->flags &= ~MSHCI_REQ_USE_DMA;
+ break;
+ } else if (sg->offset & 0x3) {
+ DBG("Reverting to PIO because of "
+ "bad alignment\n");
+ host->flags &= ~MSHCI_REQ_USE_DMA;
+ break;
+ }
+ }
+ }
+
+ if (host->flags & MSHCI_REQ_USE_DMA) {
+ ret = mshci_mdma_table_pre(host, data);
+ if (ret) {
+ /*
+ * This only happens when someone fed
+ * us an invalid request.
+ */
+ WARN_ON(1);
+ host->flags &= ~MSHCI_REQ_USE_DMA;
+ } else {
+ mshci_writel(host, host->idma_addr,
+ MSHCI_DBADDR);
+ }
+ }
+
+ if (host->flags & MSHCI_REQ_USE_DMA) {
+ /* enable DMA, IDMA interrupts and IDMAC */
+ mshci_writel(host, (mshci_readl(host, MSHCI_CTRL) |
+ ENABLE_IDMAC|DMA_ENABLE), MSHCI_CTRL);
+ mshci_writel(host, (mshci_readl(host, MSHCI_BMOD) |
+ (BMOD_IDMAC_ENABLE|BMOD_IDMAC_FB)),
+ MSHCI_BMOD);
+ mshci_writel(host, INTMSK_IDMAC_ERROR, MSHCI_IDINTEN);
+ }
+
+ if (!(host->flags & MSHCI_REQ_USE_DMA)) {
+ int flags;
+
+ flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+ host->blocks = data->blocks;
+
+ printk(KERN_ERR "it starts transfer on PIO\n");
+ }
+ /* set transfered data as 0. this value only uses for PIO write */
+ host->data_transfered = 0;
+ mshci_set_transfer_irqs(host);
+
+ mshci_writel(host, data->blksz, MSHCI_BLKSIZ);
+ mshci_writel(host, (data->blocks * data->blksz), MSHCI_BYTCNT);
+}
+
+static u32 mshci_set_transfer_mode(struct mshci_host *host,
+ struct mmc_data *data)
+{
+ u32 ret = 0;
+
+ if (data == NULL)
+ return ret;
+
+ WARN_ON(!host->data);
+
+ /* this cmd has data to transmit */
+ ret |= CMD_DATA_EXP_BIT;
+
+ if (data->flags & MMC_DATA_WRITE)
+ ret |= CMD_RW_BIT;
+ if (data->flags & MMC_DATA_STREAM)
+ ret |= CMD_TRANSMODE_BIT;
+
+ return ret;
+}
+
+static void mshci_finish_data(struct mshci_host *host)
+{
+ struct mmc_data *data;
+
+ BUG_ON(!host->data);
+
+ data = host->data;
+ host->data = NULL;
+
+ if (host->flags & MSHCI_REQ_USE_DMA) {
+ mshci_idma_table_post(host, data);
+ /* disable IDMAC and DMA interrupt */
+ mshci_writel(host, (mshci_readl(host, MSHCI_CTRL) &
+ ~(DMA_ENABLE|ENABLE_IDMAC)), MSHCI_CTRL);
+ /* mask all interrupt source of IDMAC */
+ mshci_writel(host, 0x0, MSHCI_IDINTEN);
+ }
+
+ if (data->error) {
+ mshci_reset(host, DMA_RESET);
+ data->bytes_xfered = 0;
+ } else
+ data->bytes_xfered = data->blksz * data->blocks;
+
+ if (data->stop)
+ mshci_send_command(host, data->stop);
+ else
+ tasklet_schedule(&host->finish_tasklet);
+}
+
+static void mshci_clock_onoff(struct mshci_host *host, bool val)
+{
+ u32 loop_count = 0x100000;
+
+ if (val)
+ mshci_writel(host, CLK_ENABLE, MSHCI_CLKENA);
+ else
+ mshci_writel(host, CLK_DISABLE, MSHCI_CLKENA);
+
+ mshci_writel(host, 0, MSHCI_CMD);
+ mshci_writel(host, CMD_ONLY_CLK, MSHCI_CMD);
+
+ do {
+ if (!(mshci_readl(host, MSHCI_CMD) & CMD_STRT_BIT))
+ break;
+ loop_count--;
+ } while (loop_count);
+
+ if (loop_count == 0) {
+ printk(KERN_ERR "%s: Clock %s has been failed.\n "
+ , mmc_hostname(host->mmc), val ? "ON" : "OFF");
+ }
+}
+
+static void mshci_send_command(struct mshci_host *host, struct mmc_command *cmd)
+{
+ int flags, ret;
+
+ WARN_ON(host->cmd);
+
+ /* disable interrupt before issuing cmd to the card. */
+ mshci_writel(host, (mshci_readl(host, MSHCI_CTRL) & ~INT_ENABLE),
+ MSHCI_CTRL);
+
+ mod_timer(&host->timer, jiffies + 10 * HZ);
+
+ host->cmd = cmd;
+
+ mshci_prepare_data(host, cmd->data);
+
+ mshci_writel(host, cmd->arg, MSHCI_CMDARG);
+
+ flags = mshci_set_transfer_mode(host, cmd->data);
+
+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
+ printk(KERN_ERR "%s: Unsupported response type!\n",
+ mmc_hostname(host->mmc));
+ cmd->error = -EINVAL;
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ flags |= CMD_RESP_EXP_BIT;
+ if (cmd->flags & MMC_RSP_136)
+ flags |= CMD_RESP_LENGTH_BIT;
+ }
+ if (cmd->flags & MMC_RSP_CRC)
+ flags |= CMD_CHECK_CRC_BIT;
+ flags |= (cmd->opcode | CMD_STRT_BIT | CMD_WAIT_PRV_DAT_BIT);
+
+ ret = mshci_readl(host, MSHCI_CMD);
+ if (ret & CMD_STRT_BIT)
+ printk(KERN_ERR "CMD busy. current cmd %d. last cmd reg 0x%x\n",
+ cmd->opcode, ret);
+
+ mshci_writel(host, flags, MSHCI_CMD);
+
+ /* enable interrupt upon it sends a command to the card. */
+ mshci_writel(host, (mshci_readl(host, MSHCI_CTRL) | INT_ENABLE),
+ MSHCI_CTRL);
+}
+
+static void mshci_finish_command(struct mshci_host *host)
+{
+ int i;
+
+ BUG_ON(host->cmd == NULL);
+
+ if (host->cmd->flags & MMC_RSP_PRESENT) {
+ if (host->cmd->flags & MMC_RSP_136) {
+ /*
+ * response data are overturned.
+ */
+ for (i = 0; i < 4; i++) {
+ host->cmd->resp[i] = mshci_readl(host,
+ MSHCI_RESP0 + (3-i)*4);
+ }
+ } else {
+ host->cmd->resp[0] = mshci_readl(host, MSHCI_RESP0);
+ }
+ }
+
+ host->cmd->error = 0;
+
+ /* if data interrupt occurs earlier than command interrupt */
+ if (host->data && host->data_early)
+ mshci_finish_data(host);
+
+ if (!host->cmd->data)
+ tasklet_schedule(&host->finish_tasklet);
+
+ host->cmd = NULL;
+}
+
+static void mshci_set_clock(struct mshci_host *host, unsigned int clock)
+{
+ int div;
+ u32 loop_count;
+
+ if (clock == host->clock)
+ return;
+
+ /* befor changing clock. clock needs to be off. */
+ mshci_clock_onoff(host, CLK_DISABLE);
+
+ if (clock == 0)
+ goto out;
+
+ if (clock >= host->max_clk) {
+ div = 0;
+ } else {
+ for (div = 1; div < 255; div++) {
+ if ((host->max_clk / (div<<1)) <= clock)
+ break;
+ }
+ }
+
+ mshci_writel(host, div, MSHCI_CLKDIV);
+
+ mshci_writel(host, 0, MSHCI_CMD);
+ mshci_writel(host, CMD_ONLY_CLK, MSHCI_CMD);
+ loop_count = 0x10000;
+
+ do {
+ if (!(mshci_readl(host, MSHCI_CMD) & CMD_STRT_BIT))
+ break;
+ loop_count--;
+ } while (loop_count);
+
+ if (loop_count == 0) {
+ printk(KERN_ERR "%s: Changing clock has been failed.\n "
+ , mmc_hostname(host->mmc));
+ }
+ mshci_writel(host, mshci_readl(host, MSHCI_CMD)&(~CMD_SEND_CLK_ONLY),
+ MSHCI_CMD);
+
+ mshci_clock_onoff(host, CLK_ENABLE);
+
+out:
+ host->clock = clock;
+}
+
+static void mshci_set_power(struct mshci_host *host, unsigned short power)
+{
+ u8 pwr;
+
+ if (power == (unsigned short)-1)
+ pwr = 0;
+
+ if (host->pwr == pwr)
+ return;
+
+ host->pwr = pwr;
+
+ if (pwr == 0)
+ mshci_writel(host, 0x0, MSHCI_PWREN);
+ else
+ mshci_writel(host, 0x1, MSHCI_PWREN);
+}
+
+/*****************************************************************************\
+ * *
+ * MMC callbacks *
+ * *
+\*****************************************************************************/
+
+static void mshci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct mshci_host *host;
+ bool present;
+ unsigned long flags;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ WARN_ON(host->mrq != NULL);
+
+ host->mrq = mrq;
+
+ present = !(mshci_readl(host, MSHCI_CDETECT) & CARD_PRESENT);
+
+ if (host->quirks && MSHCI_QUIRK_BROKEN_CARD_DETECTION)
+ present = true;
+
+ if (!present || host->flags & MSHCI_DEVICE_DEAD) {
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ } else {
+ mshci_send_command(host, mrq->cmd);
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void mshci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct mshci_host *host;
+ unsigned long flags;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->flags & MSHCI_DEVICE_DEAD)
+ goto out;
+
+ if (ios->power_mode == MMC_POWER_OFF)
+ mshci_reinit(host);
+
+ if (host->ops->set_ios)
+ host->ops->set_ios(host, ios);
+
+ mshci_set_clock(host, ios->clock);
+
+ if (ios->power_mode == MMC_POWER_OFF)
+ mshci_set_power(host, -1);
+ else
+ mshci_set_power(host, ios->vdd);
+
+ if (ios->bus_width == MMC_BUS_WIDTH_8)
+ mshci_writel(host, (0x1<<16), MSHCI_CTYPE);
+ else if (ios->bus_width == MMC_BUS_WIDTH_4)
+ mshci_writel(host, (0x1<<0), MSHCI_CTYPE);
+ else
+ mshci_writel(host, (0x0<<0), MSHCI_CTYPE);
+out:
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static int mshci_get_ro(struct mmc_host *mmc)
+{
+ struct mshci_host *host;
+ unsigned long flags;
+ int wrtprt;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->quirks & MSHCI_QUIRK_ALWAYS_WRITABLE)
+ wrtprt = 0;
+ else if (host->quirks & MSHCI_QUIRK_NO_WP_BIT)
+ wrtprt = host->ops->get_ro(mmc) ? 0 : WRTPRT_ON;
+ else if (host->flags & MSHCI_DEVICE_DEAD)
+ wrtprt = 0;
+ else
+ wrtprt = mshci_readl(host, MSHCI_WRTPRT);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return wrtprt & WRTPRT_ON;
+}
+
+static void mshci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct mshci_host *host;
+ unsigned long flags;
+
+ host = mmc_priv(mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->flags & MSHCI_DEVICE_DEAD)
+ goto out;
+
+ if (enable)
+ mshci_unmask_irqs(host, SDIO_INT_ENABLE);
+ else
+ mshci_mask_irqs(host, SDIO_INT_ENABLE);
+out:
+ mmiowb();
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static struct mmc_host_ops mshci_ops = {
+ .request = mshci_request,
+ .set_ios = mshci_set_ios,
+ .get_ro = mshci_get_ro,
+ .enable_sdio_irq = mshci_enable_sdio_irq,
+};
+
+/*****************************************************************************\
+ * *
+ * Tasklets *
+ * *
+\*****************************************************************************/
+
+static void mshci_tasklet_card(unsigned long param)
+{
+ struct mshci_host *host;
+ unsigned long flags;
+
+ host = (struct mshci_host *)param;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (!mshci_readl(host, MSHCI_CDETECT) & CARD_PRESENT) {
+ if (host->mrq) {
+ printk(KERN_ERR "%s: Card removed during transfer!\n",
+ mmc_hostname(host->mmc));
+ printk(KERN_ERR "%s: Resetting controller.\n",
+ mmc_hostname(host->mmc));
+
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ }
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
+}
+
+static void mshci_tasklet_finish(unsigned long param)
+{
+ struct mshci_host *host;
+ unsigned long flags;
+ struct mmc_request *mrq;
+
+ host = (struct mshci_host *)param;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ del_timer(&host->timer);
+
+ mrq = host->mrq;
+
+ /*
+ * The controller needs a reset of internal state machines
+ * upon error conditions.
+ */
+ if (!(host->flags & MSHCI_DEVICE_DEAD) &&
+ (mrq->cmd->error ||
+ (mrq->data && (mrq->data->error ||
+ (mrq->data->stop && mrq->data->stop->error))))) {
+
+ /* Spec says we should do both at the same time, but Ricoh
+ controllers do not like that. */
+ mshci_reset(host, FIFO_RESET);
+ }
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void mshci_timeout_timer(unsigned long data)
+{
+ struct mshci_host *host;
+ unsigned long flags;
+
+ host = (struct mshci_host *)data;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->mrq) {
+ printk(KERN_ERR "%s: Timeout waiting for hardware "
+ "interrupt.\n", mmc_hostname(host->mmc));
+ mshci_dumpregs(host);
+
+ if (host->data) {
+ host->data->error = -ETIMEDOUT;
+ mshci_finish_data(host);
+ } else {
+ if (host->cmd)
+ host->cmd->error = -ETIMEDOUT;
+ else
+ host->mrq->cmd->error = -ETIMEDOUT;
+
+ tasklet_schedule(&host->finish_tasklet);
+ }
+ }
+
+ mmiowb();
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+/*****************************************************************************\
+ * *
+ * Interrupt handling *
+ * *
+\*****************************************************************************/
+
+static void mshci_cmd_irq(struct mshci_host *host, u32 intmask)
+{
+ BUG_ON(intmask == 0);
+
+ if (!host->cmd) {
+ printk(KERN_ERR "%s: Got command interrupt 0x%08x even "
+ "though no command operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
+ mshci_dumpregs(host);
+ return;
+ }
+
+ if (intmask & INTMSK_RTO)
+ host->cmd->error = -ETIMEDOUT;
+ else if (intmask & (INTMSK_RCRC | INTMSK_RE))
+ host->cmd->error = -EILSEQ;
+
+ if (host->cmd->error) {
+ tasklet_schedule(&host->finish_tasklet);
+ return;
+ }
+
+ if (intmask & INTMSK_CDONE)
+ mshci_finish_command(host);
+}
+
+static void mshci_data_irq(struct mshci_host *host, u32 intmask, u8 intr_src)
+{
+ BUG_ON(intmask == 0);
+
+ if (!host->data) {
+ /*
+ * The "data complete" interrupt is also used to
+ * indicate that a busy state has ended. See comment
+ * above in mshci_cmd_irq().
+ */
+ if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
+ if (intmask & INTMSK_DTO) {
+ mshci_finish_command(host);
+ return;
+ }
+ }
+
+ printk(KERN_ERR "%s: Got data interrupt 0x%08x from %s "
+ "even though no data operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask,
+ intr_src ? "MINT" : "IDMAC");
+ mshci_dumpregs(host);
+
+ return;
+ }
+ if (intr_src == INT_SRC_MINT) {
+ if (intmask & INTMSK_DATA_TIMEOUT)
+ host->data->error = -ETIMEDOUT;
+ else if (intmask & INTMSK_DATA_CRC)
+ host->data->error = -EILSEQ;
+ else if (intmask & INTMSK_FRUN) {
+ printk(KERN_ERR "%s: FIFO underrun/overrun error\n",
+ mmc_hostname(host->mmc));
+ host->data->error = -EIO;
+ }
+ } else {
+ if (intmask & (IDSTS_FBE | IDSTS_CES | IDSTS_DU)) {
+ printk(KERN_ERR "%s: Fatal Bus error on DMA\n",
+ mmc_hostname(host->mmc));
+ host->data->error = -EIO;
+ }
+ }
+
+ if (host->data->error)
+ mshci_finish_data(host);
+ else {
+ if (!(host->flags & MSHCI_REQ_USE_DMA) &&
+ (((host->data->flags & MMC_DATA_READ) &&
+ (intmask & (INTMSK_RXDR | INTMSK_DTO))) ||
+ ((host->data->flags & MMC_DATA_WRITE) &&
+ (intmask & (INTMSK_TXDR)))))
+ mshci_transfer_pio(host);
+
+ if (intmask & INTMSK_DTO) {
+ if (host->cmd) {
+ /*
+ * Data managed to finish before the
+ * command completed. Make sure we do
+ * things in the proper order.
+ */
+ host->data_early = 1;
+ } else {
+ mshci_finish_data(host);
+ }
+ }
+ }
+}
+
+static irqreturn_t mshci_irq(int irq, void *dev_id)
+{
+ irqreturn_t result;
+ struct mshci_host *host = dev_id;
+ u32 intmask;
+ int cardint = 0;
+ int timeout = 100;
+
+ spin_lock(&host->lock);
+
+ intmask = mshci_readl(host, MSHCI_MINTSTS);
+
+ if (!intmask || intmask == 0xffffffff) {
+ /* check if there is a interrupt for IDMAC */
+ intmask = mshci_readl(host, MSHCI_IDSTS);
+ if (intmask) {
+ mshci_writel(host, intmask, MSHCI_IDSTS);
+ mshci_data_irq(host, intmask, INT_SRC_IDMAC);
+ result = IRQ_HANDLED;
+ goto out;
+ }
+ result = IRQ_NONE;
+ goto out;
+ }
+ DBG("*** %s got interrupt: 0x%08x\n",
+ mmc_hostname(host->mmc), intmask);
+
+ mshci_writel(host, intmask, MSHCI_RINTSTS);
+
+ if (intmask & (INTMSK_CDETECT))
+ tasklet_schedule(&host->card_tasklet);
+
+ intmask &= ~INTMSK_CDETECT;
+
+ if (intmask & CMD_STATUS) {
+ if (!(intmask & INTMSK_CDONE) && (intmask & INTMSK_RTO)) {
+ /*
+ * when a error about command timeout occurs,
+ * cmd done intr comes together.
+ * cmd done intr comes later than error intr.
+ * so, it has to wait for cmd done intr.
+ */
+ while (--timeout &&
+ (!(mshci_readl(host, MSHCI_MINTSTS)
+ & INTMSK_CDONE))) {
+ if (!timeout)
+ printk(KERN_ERR"*** %s time out for\
+ CDONE intr\n",
+ mmc_hostname(host->mmc));
+ else
+ mshci_writel(host, INTMSK_CDONE,
+ MSHCI_RINTSTS);
+ }
+ mshci_cmd_irq(host, intmask & CMD_STATUS);
+ } else {
+ mshci_cmd_irq(host, intmask & CMD_STATUS);
+ }
+ }
+
+ if (intmask & DATA_STATUS) {
+ if (!(intmask & INTMSK_DTO) && (intmask & INTMSK_DRTO)) {
+ /*
+ * when a error about data timout occurs,
+ * DTO intr comes together.
+ * DTO intr comes later than error intr.
+ * so, it has to wait for DTO intr.
+ */
+ while (--timeout &&
+ (!(mshci_readl(host, MSHCI_MINTSTS)
+ & INTMSK_DTO))) {
+ if (!timeout)
+ printk(KERN_ERR"*** %s time out for\
+ CDONE intr\n",
+ mmc_hostname(host->mmc));
+ else
+ mshci_writel(host, INTMSK_DTO,
+ MSHCI_RINTSTS);
+ }
+ mshci_data_irq(host, intmask &
+ DATA_STATUS, INT_SRC_MINT);
+ } else {
+ mshci_data_irq(host, intmask &
+ DATA_STATUS, INT_SRC_MINT);
+ }
+ }
+
+ intmask &= ~(CMD_STATUS | DATA_STATUS);
+
+ if (intmask & SDIO_INT_ENABLE)
+ cardint = 1;
+
+ intmask &= ~SDIO_INT_ENABLE;
+
+ if (intmask) {
+ printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
+ mmc_hostname(host->mmc), intmask);
+ mshci_dumpregs(host);
+ }
+
+ result = IRQ_HANDLED;
+
+ mmiowb();
+out:
+ spin_unlock(&host->lock);
+
+ /*
+ * We have to delay this as it calls back into the driver.
+ */
+ if (cardint)
+ mmc_signal_sdio_irq(host->mmc);
+
+ return result;
+}
+
+/*****************************************************************************\
+ * *
+ * Suspend/resume *
+ * *
+\*****************************************************************************/
+
+#ifdef CONFIG_PM
+
+int mshci_suspend_host(struct mshci_host *host, pm_message_t state)
+{
+ int ret;
+
+ mshci_disable_card_detection(host);
+
+ ret = mmc_suspend_host(host->mmc);
+ if (ret)
+ return ret;
+
+ free_irq(host->irq, host);
+
+ if (host->vmmc)
+ ret = regulator_disable(host->vmmc);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mshci_suspend_host);
+
+int mshci_resume_host(struct mshci_host *host)
+{
+ int ret;
+
+ if (host->vmmc) {
+ ret = regulator_enable(host->vmmc);
+ if (ret)
+ return ret;
+ }
+
+ if (host->flags & (MSHCI_USE_IDMA)) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
+
+ ret = request_irq(host->irq, mshci_irq, IRQF_SHARED,
+ mmc_hostname(host->mmc), host);
+ if (ret)
+ return ret;
+
+ mshci_init(host);
+ mmiowb();
+
+ ret = mmc_resume_host(host->mmc);
+ mshci_enable_card_detection(host);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mshci_resume_host);
+
+#endif /* CONFIG_PM */
+
+/*****************************************************************************\
+ * *
+ * Device allocation/registration *
+ * *
+\*****************************************************************************/
+
+struct mshci_host *mshci_alloc_host(struct device *dev,
+ size_t priv_size)
+{
+ struct mmc_host *mmc;
+ struct mshci_host *host;
+
+ WARN_ON(dev == NULL);
+
+ mmc = mmc_alloc_host(sizeof(struct mshci_host) + priv_size, dev);
+ if (!mmc)
+ return ERR_PTR(-ENOMEM);
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ return host;
+}
+EXPORT_SYMBOL_GPL(mshci_alloc_host);
+
+static void mshci_fifo_init(struct mshci_host *host)
+{
+ int fifo_val, fifo_depth, fifo_threshold;
+
+ fifo_val = mshci_readl(host, MSHCI_FIFOTH);
+ fifo_depth = ((fifo_val & RX_WMARK) >> 16) + 1;
+ fifo_threshold = fifo_depth / 2;
+ host->fifo_threshold = fifo_threshold;
+ host->fifo_depth = fifo_threshold * 2;
+
+ printk(KERN_INFO "%s: FIFO WMARK FOR RX 0x%x WX 0x%x.\n",
+ mmc_hostname(host->mmc), fifo_depth,
+ ((fifo_val & TX_WMARK)>>16)+1);
+
+ fifo_val &= ~(RX_WMARK | TX_WMARK | MSIZE_MASK);
+
+ fifo_val |= (fifo_threshold | (fifo_threshold<<16));
+ fifo_val |= MSIZE_8;
+
+ mshci_writel(host, fifo_val, MSHCI_FIFOTH);
+}
+
+int mshci_add_host(struct mshci_host *host)
+{
+ struct mmc_host *mmc;
+ int ret, count;
+
+ WARN_ON(host == NULL);
+ if (host == NULL)
+ return -EINVAL;
+
+ mmc = host->mmc;
+
+ if (debug_quirks)
+ host->quirks = debug_quirks;
+
+ mshci_reset(host, RESET_ALL);
+
+ host->version = mshci_readl(host, MSHCI_VERID);
+
+ /* there are no reasons not to use DMA */
+ host->flags |= MSHCI_USE_IDMA;
+
+ if (host->flags & MSHCI_USE_IDMA) {
+ /* We need to allocate descriptors for all sg entries
+ * 128 transfer for each of those entries. */
+ host->idma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
+ if (!host->idma_desc) {
+ kfree(host->idma_desc);
+ printk(KERN_WARNING "%s: Unable to allocate IDMA "
+ "buffers. Falling back to standard DMA.\n",
+ mmc_hostname(mmc));
+ host->flags &= ~MSHCI_USE_IDMA;
+ }
+ }
+
+ /*
+ * If we use DMA, then it's up to the caller to set the DMA
+ * mask, but PIO does not need the hw shim so we set a new
+ * mask here in that case.
+ */
+ if (!(host->flags & (MSHCI_USE_IDMA))) {
+ host->dma_mask = DMA_BIT_MASK(64);
+ mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
+ }
+
+ printk("%s: Version ID 0x%x.\n",
+ mmc_hostname(host->mmc), host->version);
+
+ host->max_clk = 0;
+
+ if (host->max_clk == 0) {
+ if (!host->ops->get_max_clock) {
+ printk(KERN_ERR
+ "%s: Hardware doesn't specify base clock "
+ "frequency.\n", mmc_hostname(mmc));
+ return -ENODEV;
+ }
+ host->max_clk = host->ops->get_max_clock(host);
+ }
+
+ /*
+ * Set host parameters.
+ */
+ if (host->ops->get_ro)
+ mshci_ops.get_ro = host->ops->get_ro;
+
+ mmc->ops = &mshci_ops;
+ mmc->f_min = host->max_clk / 512;
+ mmc->f_max = host->max_clk;
+
+ mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_4_BIT_DATA;
+
+ mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34 |
+ MMC_VDD_29_30 | MMC_VDD_30_31;
+
+ spin_lock_init(&host->lock);
+
+ mmc->max_segs = 128;
+
+ /* Maximum number of sectors in one transfer */
+ mmc->max_req_size = 524288;
+
+ /*
+ * Maximum segment size. Could be one segment with the maximum number
+ * of bytes. When doing hardware scatter/gather, each entry cannot
+ * be larger than 4 KiB though.
+ */
+ if (host->flags & MSHCI_USE_IDMA)
+ mmc->max_seg_size = 0x1000;
+ else
+ mmc->max_seg_size = mmc->max_req_size;
+
+ /*
+ * from SD spec 2.0 and MMC spec 4.2, block size has been
+ * fixed to 512 byte
+ */
+ mmc->max_blk_size = 512;
+
+ /*
+ * Maximum block count.
+ */
+ mmc->max_blk_count = 65535;
+
+ /*
+ * Init tasklets.
+ */
+ tasklet_init(&host->card_tasklet,
+ mshci_tasklet_card, (unsigned long)host);
+ tasklet_init(&host->finish_tasklet,
+ mshci_tasklet_finish, (unsigned long)host);
+
+ setup_timer(&host->timer, mshci_timeout_timer, (unsigned long)host);
+
+ ret = request_irq(host->irq, mshci_irq, IRQF_SHARED,
+ mmc_hostname(mmc), host);
+ if (ret)
+ goto untasklet;
+
+ host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
+ if (IS_ERR(host->vmmc)) {
+ printk(KERN_INFO "%s: no vmmc regulator found\n",
+ mmc_hostname(mmc));
+ host->vmmc = NULL;
+ } else
+ regulator_enable(host->vmmc);
+
+ mshci_init(host);
+ mshci_fifo_init(host);
+
+ mshci_writel(host, (mshci_readl(host, MSHCI_CTRL) | INT_ENABLE),
+ MSHCI_CTRL);
+
+ /* set debounce filter value*/
+ mshci_writel(host, 0xffffff, MSHCI_DEBNCE);
+
+ /* clear card type. set 1bit mode */
+ mshci_writel(host, 0x0, MSHCI_CTYPE);
+
+ /* set bus mode register for IDMAC */
+ if (host->flags & MSHCI_USE_IDMA) {
+ mshci_writel(host, BMOD_IDMAC_RESET, MSHCI_BMOD);
+ count = 100;
+ while ((mshci_readl(host, MSHCI_BMOD) & BMOD_IDMAC_RESET)
+ && --count);
+
+ mshci_writel(host, (mshci_readl(host, MSHCI_BMOD) |
+ (BMOD_IDMAC_ENABLE|BMOD_IDMAC_FB)), MSHCI_BMOD);
+ }
+#ifdef CONFIG_MMC_DEBUG
+ mshci_dumpregs(host);
+#endif
+
+ mmiowb();
+
+ mmc_add_host(mmc);
+
+ printk(KERN_INFO "%s: MSHCI controller on %s [%s] using %s\n",
+ mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
+ (host->flags & MSHCI_USE_IDMA) ? "IDMA" : "PIO");
+
+ mshci_enable_card_detection(host);
+
+ return 0;
+
+untasklet:
+ tasklet_kill(&host->card_tasklet);
+ tasklet_kill(&host->finish_tasklet);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(mshci_add_host);
+
+void mshci_remove_host(struct mshci_host *host, int dead)
+{
+ unsigned long flags;
+
+ if (dead) {
+ spin_lock_irqsave(&host->lock, flags);
+
+ host->flags |= MSHCI_DEVICE_DEAD;
+
+ if (host->mrq) {
+ printk(KERN_ERR "%s: Controller removed during "
+ " transfer!\n", mmc_hostname(host->mmc));
+
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
+
+ mshci_disable_card_detection(host);
+
+ mmc_remove_host(host->mmc);
+
+ if (!dead)
+ mshci_reset(host, RESET_ALL);
+
+ free_irq(host->irq, host);
+
+ del_timer_sync(&host->timer);
+
+ tasklet_kill(&host->card_tasklet);
+ tasklet_kill(&host->finish_tasklet);
+
+ kfree(host->idma_desc);
+
+ host->idma_desc = NULL;
+ host->align_buffer = NULL;
+}
+EXPORT_SYMBOL_GPL(mshci_remove_host);
+
+void mshci_free_host(struct mshci_host *host)
+{
+ mmc_free_host(host->mmc);
+}
+EXPORT_SYMBOL_GPL(mshci_free_host);
+
+/*****************************************************************************\
+ * *
+ * Driver init/exit *
+ * *
+\*****************************************************************************/
+
+static int __init mshci_drv_init(void)
+{
+ printk(KERN_INFO DRIVER_NAME
+ ": Mobile Storage Host Controller Interface driver\n");
+
+ return 0;
+}
+
+static void __exit mshci_drv_exit(void)
+{
+}
+
+module_init(mshci_drv_init);
+module_exit(mshci_drv_exit);
+
+module_param(debug_quirks, uint, 0444);
+
+MODULE_AUTHOR("Jaehoon Chung <jh80.chung@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Mobile Storage Host Controller Interface core driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
diff --git a/drivers/mmc/host/mshci.h b/drivers/mmc/host/mshci.h
new file mode 100644
index 0000000..4594494
--- /dev/null
+++ b/drivers/mmc/host/mshci.h
@@ -0,0 +1,364 @@
+ /*
+ * linux/drivers/mmc/host/mshci.h - Mobile Storage Host Controller Interface driver
+ *
+ * Copyright (C) 2011 Samsung Electronics, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef __MSHCI_H
+#define __MSHCI_H
+
+#include <linux/scatterlist.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#define MSHCI_CTRL 0x00 /* Control Register */
+#define CTRL_RESET (0x1<<0)
+#define FIFO_RESET (0x1<<1)
+#define DMA_RESET (0x1<<2)
+#define RESET_ALL (CTRL_RESET | FIFO_RESET | DMA_RESET)
+#define INT_ENABLE (0x1<<4) /*Global interrupt */
+#define DMA_ENABLE (0x1<<5) /* DMA transfer mode */
+#define ENABLE_IDMAC (0x1<<25)
+
+#define MSHCI_PWREN 0x04 /* Power-enable */
+#define POWER_ENABLE (0x1<<0)
+
+#define MSHCI_CLKDIV 0x08 /* Clock divider */
+#define MSHCI_CLKSRC 0x0C /* Clock source */
+
+#define MSHCI_CLKENA 0x10 /* Clock enable */
+#define CLK_SDMMC_MAX (48000000) /* 96Mhz. it SHOULDBE optimized */
+#define CLK_ENABLE (0x1<<0)
+#define CLK_DISABLE (0x0<<0)
+
+#define MSHCI_TMOUT 0x14 /* Timeout */
+#define RSP_TIMEOUT (0xFF<<0)
+#define DATA_TIMEOUT (0xFFFFFF<<8)
+
+#define MSHCI_CTYPE 0x18 /* Card type */
+#define CARD_WIDTH14 (0xFFFF<<0)
+#define CARD_WIDTH8 (0xFFFF<<16)
+
+#define MSHCI_BLKSIZ 0x1C /* Block Size */
+#define BLK_SIZ (0xFFFF<<0)
+
+#define MSHCI_BYTCNT 0x20 /* Byte count */
+#define MSHCI_INTMSK 0x24 /* Interrupt Mask */
+#define INT_MASK (0xFFFF<<0)
+#define SDIO_INT_MASK (0xFFFF<<16)
+#define SDIO_INT_ENABLE (0x1<<16)
+#define INTMSK_ALL 0xFFFFFFFF
+#define INTMSK_CDETECT (0x1<<0)
+#define INTMSK_RE (0x1<<1)
+#define INTMSK_CDONE (0x1<<2)
+#define INTMSK_DTO (0x1<<3)
+#define INTMSK_TXDR (0x1<<4)
+#define INTMSK_RXDR (0x1<<5)
+#define INTMSK_RCRC (0x1<<6)
+#define INTMSK_DCRC (0x1<<7)
+#define INTMSK_RTO (0x1<<8)
+#define INTMSK_DRTO (0x1<<9)
+#define INTMSK_HTO (0x1<<10)
+#define INTMSK_FRUN (0x1<<11)
+#define INTMSK_HLE (0x1<<12)
+#define INTMSK_SBE (0x1<<13)
+#define INTMSK_ACD (0x1<<14)
+#define INTMSK_EBE (0x1<<15)
+#define INTMSK_DMA (INTMSK_ACD | INTMSK_RXDR | INTMSK_TXDR)
+#define INTMSK_DATA_TIMEOUT (INTMSK_HTO | INTMSK_DRTO)
+#define INTMSK_DATA_CRC (INTMSK_EBE | INTMSK_SBE | INTMSK_DCRC)
+
+#define INT_SRC_IDMAC (0x0)
+#define INT_SRC_MINT (0x1)
+
+#define MSHCI_CMDARG 0x28 /* Command Argument */
+#define MSHCI_CMD 0x2C /* Command */
+#define CMD_RESP_EXP_BIT (0x1<<6)
+#define CMD_RESP_LENGTH_BIT (0x1<<7)
+#define CMD_CHECK_CRC_BIT (0x1<<8)
+#define CMD_DATA_EXP_BIT (0x1<<9)
+#define CMD_RW_BIT (0x1<<10)
+#define CMD_TRANSMODE_BIT (0x1<<11)
+#define CMD_SENT_AUTO_STOP_BIT (0x1<<12)
+#define CMD_WAIT_PRV_DAT_BIT (0x1<<13)
+#define CMD_ABRT_CMD_BIT (0x1<<14)
+#define CMD_SEND_INIT_BIT (0x1<<15)
+#define CMD_CARD_NUM_BITS (0x1F<<16)
+#define CMD_SEND_CLK_ONLY (0x1<<21)
+#define CMD_READ_CEATA (0x1<<22)
+#define CMD_CCS_EXPECTED (0x1<<23)
+#define CMD_STRT_BIT (0x1<<31)
+#define CMD_ONLY_CLK (CMD_STRT_BIT | CMD_SEND_CLK_ONLY | \
+ CMD_WAIT_PRV_DAT_BIT)
+
+#define MSHCI_RESP0 0x30 /* Response 0 */
+
+#define MSHCI_MINTSTS 0x40 /* Masked interrupt status */
+#define MSHCI_RINTSTS 0x44 /* Raw interrupt status */
+#define INT_STATUS (0xFFFF<<0)
+#define SDIO_INTR (0xFFFF<<16)
+#define DATA_ERR (INTMSK_EBE | INTMSK_SBE | INTMSK_HLE | INTMSK_FRUN | \
+ INTMSK_EBE | INTMSK_DCRC)
+#define DATA_TOUT (INTMSK_HTO | INTMSK_DRTO)
+#define DATA_STATUS (DATA_ERR | DATA_TOUT | INTMSK_RXDR | \
+ INTMSK_TXDR | INTMSK_DTO)
+#define CMD_STATUS (INTMSK_RTO | INTMSK_RCRC | INTMSK_CDONE | INTMSK_RE)
+#define CMD_ERROR (INTMSK_RCRC | INTMSK_RTO | INTMSK_RE)
+
+#define MSHCI_STATUS 0x48 /* Status */
+#define FIFO_RXWTRMARK (0x1<<0)
+#define FIFO_TXWTRMARK (0x1<<1)
+#define FIFO_EMPTY (0x1<<2)
+#define FIFO_FULL (0x1<<3)
+#define CMD_FSMSTAT (0xF<<4)
+#define DATA_3STATUS (0x1<<8)
+#define DATA_BUSY (0x1<<9)
+#define DATA_MCBUSY (0x1<<10)
+#define RSP_INDEX (0x3F<<11)
+#define FIFO_COUNT (0x1FFF<<17)
+#define DMA_ACK (0x1<<30)
+#define DMA_REQ (0x1<<31)
+#define FIFO_WIDTH (0x4)
+#define FIFO_DEPTH (0x20)
+
+/*Command FSM status */
+#define FSM_IDLE (0<<4)
+#define FSM_SEND_INIT_SEQ (1<<4)
+#define FSM_TX_CMD_STARTBIT (2<<4)
+#define FSM_TX_CMD_TXBIT (3<<4)
+#define FSM_TX_CMD_INDEX_ARG (4<<4)
+#define FSM_TX_CMD_CRC7 (5<<4)
+#define FSM_TX_CMD_ENDBIT (6<<4)
+#define FSM_RX_RESP_STARTBIT (7<<4)
+#define FSM_RX_RESP_IRQRESP (8<<4)
+#define FSM_RX_RESP_TXBIT (9<<4)
+#define FSM_RX_RESP_CMDIDX (10<<4)
+#define FSM_RX_RESP_DATA (11<<4)
+#define FSM_RX_RESP_CRC7 (12<<4)
+#define FSM_RX_RESP_ENDBIT (13<<4)
+#define FSM_CMD_PATHWAITNCC (14<<4)
+#define FSM_WAIT (15<<4)
+
+#define MSHCI_FIFOTH 0x4C /* FIFO threshold */
+#define TX_WMARK (0xFFF<<0)
+#define RX_WMARK (0xFFF<<16)
+#define MSIZE_MASK (0x7<<28)
+
+/* DW DMA Mutiple Transaction Size */
+#define MSIZE_1 (0<<28)
+#define MSIZE_4 (1<<28)
+#define MSIZE_8 (2<<28)
+#define MSIZE_16 (3<<28)
+#define MSIZE_32 (4<<28)
+#define MSIZE_64 (5<<28)
+#define MSIZE_128 (6<<28)
+#define MSIZE_256 (7<<28)
+
+#define MSHCI_CDETECT 0x50 /* Card detect */
+#define CARD_PRESENT (0x1<<0)
+
+#define MSHCI_WRTPRT 0x54 /* Write protect */
+#define WRTPRT_ON (0x1<<0)
+
+#define MSHCI_GPIO 0x58 /* General Purpose IO */
+#define MSHCI_TCBCNT 0x5C /* Transferred CIU byte count */
+#define MSHCI_TBBCNT 0x60 /* Transferred host/DMA to/from byte count */
+#define MSHCI_DEBNCE 0x64 /* Card detect debounce */
+#define MSHCI_USRID 0x68 /* User ID */
+#define MSHCI_VERID 0x6C /* Version ID */
+
+#define MSHCI_HCON 0x70 /* Hardware Configuration */
+#define CARD_TYPE (0x1<<0)
+#define NUM_CARDS (0x1F<<1)
+#define H_BUS_TYPE (0x1<<6)
+#define H_DATA_WIDTH (0x7<<7)
+#define H_ADDR_WIDTH (0x3F<<10)
+#define DMA_INTERFACE (0x3<<16)
+#define GE_DMA_DATA_WIDTH (0x7<<18)
+#define FIFO_RAM_INSIDE (0x1<<21)
+#define UMPLEMENT_HOLD_REG (0x1<<22)
+#define SET_CLK_FALSE_PATH (0x1<<23)
+#define NUM_CLK_DIVIDER (0x3<<24)
+
+#define MSHCI_UHS_REG 0x74 /* UHS and DDR setting */
+
+#define MSHCI_BMOD 0x80 /* Bus mode register */
+#define BMOD_IDMAC_RESET (0x1<<0)
+#define BMOD_IDMAC_FB (0x1<<1)
+#define BMOD_IDMAC_ENABLE (0x1<<7)
+
+#define MSHCI_PLDMND 0x84 /* Poll demand */
+#define MSHCI_DBADDR 0x88 /* Descriptor list base address */
+#define MSHCI_IDSTS 0x8C /* Internal DMAC status */
+#define IDSTS_FSM (0xf<<13)
+#define IDSTS_EB (0x7<<10)
+#define IDSTS_AIS (0x1<<9)
+#define IDSTS_NIS (0x1<<8)
+#define IDSTS_CES (0x1<<5)
+#define IDSTS_DU (0x1<<4)
+#define IDSTS_FBE (0x1<<2)
+#define IDSTS_RI (0x1<<1)
+#define IDSTS_TI (0x1<<0)
+
+#define MSHCI_IDINTEN 0x90 /* Internal DMAC interrupt enable */
+#define MSHCI_DSCADDR 0x94 /* Current host descriptor address */
+#define MSHCI_BUFADDR 0x98 /* Current host buffer address */
+#define MSHCI_WAKEUPCON 0xA0 /* Wakeup control register */
+#define MSHCI_CLOCKCON 0xA4 /* Clock (delay) control register */
+#define MSHCI_FIFODAT 0x100 /* FIFO data read write */
+
+struct mshci_ops;
+
+struct mshci_idmac {
+ u32 des[4];
+#define MSHCI_IDMAC_OWN (1<<31)
+#define MSHCI_IDMAC_ER (1<<5)
+#define MSHCI_IDMAC_CH (1<<4)
+#define MSHCI_IDMAC_FS (1<<3)
+#define MSHCI_IDMAC_LD (1<<2)
+#define MSHCI_IDMAC_DIC (1<<1)
+#define INTMSK_IDMAC_ALL (0x337)
+#define INTMSK_IDMAC_ERROR (0x214)
+};
+
+struct mshci_host {
+ /* Data set by hardware interface driver */
+ const char *hw_name; /* Hardware bus name */
+
+ unsigned int quirks; /* Deviations from spec. */
+/* Controller has no write-protect pin connected with SD card */
+#define MSHCI_QUIRK_NO_WP_BIT (1<<0)
+#define MSHCI_QUIRK_BROKEN_CARD_DETECTION (1<<1)
+#define MSHCI_QUIRK_ALWAYS_WRITABLE (1<<2)
+
+ int irq; /* Device IRQ */
+ void __iomem *ioaddr; /* Mapped address */
+
+ const struct mshci_ops *ops; /* Low level hw interface */
+
+ struct regulator *vmmc; /* Power regulator */
+
+ /* Internal data */
+ struct mmc_host *mmc; /* MMC structure */
+ u64 dma_mask; /* custom DMA mask */
+
+ spinlock_t lock; /* Mutex */
+
+ int flags; /* Host attributes */
+#define MSHCI_USE_IDMA (1<<1) /* Host is ADMA capable */
+#define MSHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
+#define MSHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
+
+ unsigned int version; /* SDHCI spec. version */
+
+ unsigned int max_clk; /* Max possible freq (MHz) */
+ unsigned int timeout_clk; /* Timeout freq (KHz) */
+
+ unsigned int clock; /* Current clock (MHz) */
+ u8 pwr; /* Current voltage */
+
+ struct mmc_request *mrq; /* Current request */
+ struct mmc_command *cmd; /* Current command */
+ struct mmc_data *data; /* Current data request */
+ unsigned int data_early:1; /* Data finished before cmd */
+
+ struct sg_mapping_iter sg_miter; /* SG state for PIO */
+ unsigned int blocks; /* remaining PIO blocks */
+
+ int sg_count; /* Mapped sg entries */
+
+ u8 *idma_desc; /* ADMA descriptor table */
+ u8 *align_buffer; /* Bounce buffer */
+
+ dma_addr_t idma_addr; /* Mapped ADMA descr. table */
+ dma_addr_t align_addr; /* Mapped bounce buffer */
+
+ struct tasklet_struct card_tasklet; /* Tasklet structures */
+ struct tasklet_struct finish_tasklet;
+
+ struct timer_list timer; /* Timer for timeouts */
+
+ u32 fifo_depth;
+ u32 fifo_threshold;
+ u32 data_transfered;
+ unsigned long private[0] ____cacheline_aligned;
+};
+
+
+struct mshci_ops {
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
+ u32 (*readl)(struct mshci_host *host, int reg);
+ u16 (*readw)(struct mshci_host *host, int reg);
+ u8 (*readb)(struct mshci_host *host, int reg);
+ void (*writel)(struct mshci_host *host, u32 val, int reg);
+ void (*writew)(struct mshci_host *host, u16 val, int reg);
+ void (*writeb)(struct mshci_host *host, u8 val, int reg);
+#endif
+
+ void (*set_clock)(struct mshci_host *host, unsigned int clock);
+
+ int (*enable_dma)(struct mshci_host *host);
+ unsigned int (*get_max_clock)(struct mshci_host *host);
+ unsigned int (*get_min_clock)(struct mshci_host *host);
+ unsigned int (*get_timeout_clock)(struct mshci_host *host);
+ void (*set_ios)(struct mshci_host *host,
+ struct mmc_ios *ios);
+ int (*get_ro) (struct mmc_host *mmc);
+ void (*init_issue_cmd)(struct mshci_host *host);
+};
+
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
+
+static inline void mshci_writel(struct mshci_host *host, u32 val, int reg)
+{
+ if (unlikely(host->ops->writel))
+ host->ops->writel(host, val, reg);
+ else
+ writel(val, host->ioaddr + reg);
+}
+
+static inline u32 mshci_readl(struct mshci_host *host, int reg)
+{
+ if (unlikely(host->ops->readl))
+ return host->ops->readl(host, reg);
+ else
+ return readl(host->ioaddr + reg);
+}
+
+#else
+
+static inline void mshci_writel(struct mshci_host *host, u32 val, int reg)
+{
+ writel(val, host->ioaddr + reg);
+}
+
+static inline u32 mshci_readl(struct mshci_host *host, int reg)
+{
+ return readl(host->ioaddr + reg);
+}
+
+#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
+
+extern struct mshci_host *mshci_alloc_host(struct device *dev,
+ size_t priv_size);
+extern void mshci_free_host(struct mshci_host *host);
+
+static inline void *mshci_priv(struct mshci_host *host)
+{
+ return (void *)host->private;
+}
+
+extern int mshci_add_host(struct mshci_host *host);
+extern void mshci_remove_host(struct mshci_host *host, int dead);
+
+#ifdef CONFIG_PM
+extern int mshci_suspend_host(struct mshci_host *host, pm_message_t state);
+extern int mshci_resume_host(struct mshci_host *host);
+#endif
+
+#endif /* __MSHCI_H */
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
