Re: [PATCH 2/2] sdhci-pxa add call back interface to share sdhci-pxa

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 3, 2010 at 1:31 AM, zhangfei gao <zhangfei.gao@xxxxxxxxx> wrote:
> From fb5927afac7cbb44805093816bea51dde33da1e5 Mon Sep 17 00:00:00 2001
> From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxxx>
> Date: Tue, 30 Nov 2010 05:43:29 -0500
> Subject: [PATCH 2/2] sdhci-pxa: add call back interface to share sdhci-pxa
>
>        Call back functions is added to support mmp2, pxa910, pxa168 and pxa955
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxxx>
> CC: RaymondWu <xywu@xxxxxxxxxxx>
> CC: Jun Nie <njun@xxxxxxxxxxx>
> CC: Philip Rakity <prakity@xxxxxxxxxxx>
> ---
>  arch/arm/plat-pxa/include/plat/sdhci.h |   44 +++++++++++++++++
>  drivers/mmc/host/sdhci-pxa.c           |   83 +++++++++++++++++++++-----------
>  2 files changed, 98 insertions(+), 29 deletions(-)
>
> diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h
> b/arch/arm/plat-pxa/include/plat/sdhci.h
> index 1ab332e..4ce3b05 100644
> --- a/arch/arm/plat-pxa/include/plat/sdhci.h
> +++ b/arch/arm/plat-pxa/include/plat/sdhci.h
> @@ -13,9 +13,14 @@
>  #ifndef __PLAT_PXA_SDHCI_H
>  #define __PLAT_PXA_SDHCI_H
>
> +#include <linux/mmc/sdhci.h>
> +#include <linux/platform_device.h>
> +
>  /* pxa specific flag */
>  /* Require clock free running */
>  #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
> +/* card alwayes wired to host, like on-chip emmc */
> +#define PXA_FLAG_CARD_PERMANENT        (1<<1)
>
>  /* Board design supports 8-bit data on SD/SDIO BUS */
>  #define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
> @@ -25,11 +30,50 @@
>  * @max_speed: the maximum speed supported
>  * @quirks: quirks of specific device
>  * @flags: flags for platform requirement
> + * @clk_delay_cycles:
> + *     mmp2: each step is roughly 100ps, 5bits width
> + *     pxa910 & pxa168: each step is 1ns, 4bits width
> + * @clk_delay_enable: enable clk_delay or not, used on pxa910 & pxa168
> + * @clk_delay_sel: select clk_delay, used on pxa910 & pxa168
> + *     0: choose feedback clk
> + *     1: choose feedback clk + delay value
> + *     2: choose internal clk
> + * @ext_cd_gpio: gpio pin used for external CD line
> + * @ext_cd_gpio_invert: invert values for external CD gpio line
> + * @soc_set_timing: set timing for specific soc
> + * @ext_cd_init: Initialize external card detect subsystem
> + * @ext_cd_cleanup: Cleanup external card detect subsystem
> + * @soc_set_ops: overwrite host ops with soc specific ops
>  */
> +struct sdhci_pxa;
>  struct sdhci_pxa_platdata {
>        unsigned int    max_speed;
>        unsigned int    quirks;
>        unsigned int    flags;
> +       unsigned int    clk_delay_cycles;
> +       unsigned int    clk_delay_sel;
> +       unsigned int    ext_cd_gpio;
> +       bool            ext_cd_gpio_invert;
> +       bool            clk_delay_enable;
> +
> +       void (*soc_set_timing)(struct sdhci_host *host,
> +                       struct sdhci_pxa_platdata *pdata);
> +       int (*ext_cd_init)(void (*notify_func)(struct platform_device *dev,
> +                                                  int state), void *data);
> +       int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *dev,
> +                                                     int state), void *data);
> +       void (*soc_set_ops)(struct sdhci_pxa *pxa);
> +};
> +
> +struct sdhci_pxa {
> +       struct sdhci_host               *host;
> +       struct sdhci_pxa_platdata       *pdata;
> +       struct clk                      *clk;
> +       struct resource                 *res;
> +       struct sdhci_ops                *ops;
> +
> +       u8      clk_enable;
> +       u8      power_mode;
>  };
>
>  #endif /* __PLAT_PXA_SDHCI_H */
> diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
> index 5a61208..f79dccf 100644
> --- a/drivers/mmc/host/sdhci-pxa.c
> +++ b/drivers/mmc/host/sdhci-pxa.c
> @@ -24,32 +24,22 @@
>  #include <linux/clk.h>
>  #include <linux/io.h>
>  #include <linux/err.h>
> +#include <linux/slab.h>
>  #include <plat/sdhci.h>
>  #include "sdhci.h"
>
>  #define DRIVER_NAME    "sdhci-pxa"
>
> -#define SD_FIFO_PARAM          0x104
> -#define DIS_PAD_SD_CLK_GATE    0x400
> -
> -struct sdhci_pxa {
> -       struct sdhci_host               *host;
> -       struct sdhci_pxa_platdata       *pdata;
> -       struct clk                      *clk;
> -       struct resource                 *res;
> -
> -       u8 clk_enable;
> -};
> -
>  /*****************************************************************************\
>  *                                                                           *
>  * SDHCI core callbacks                                                      *
>  *                                                                           *
>  \*****************************************************************************/
> +
>  static void set_clock(struct sdhci_host *host, unsigned int clock)
>  {
>        struct sdhci_pxa *pxa = sdhci_priv(host);
> -       u32 tmp = 0;
> +       struct sdhci_pxa_platdata *pdata = pxa->pdata;
>
>        if (clock == 0) {
>                if (pxa->clk_enable) {
> @@ -57,21 +47,31 @@ static void set_clock(struct sdhci_host *host,
> unsigned int clock)
>                        pxa->clk_enable = 0;
>                }
>        } else {
> -               if (0 == pxa->clk_enable) {
> -                       if (pxa->pdata->flags & PXA_FLAG_DISABLE_CLOCK_GATING) {
> -                               tmp = readl(host->ioaddr + SD_FIFO_PARAM);
> -                               tmp |= DIS_PAD_SD_CLK_GATE;
> -                               writel(tmp, host->ioaddr + SD_FIFO_PARAM);
> -                       }
> -                       clk_enable(pxa->clk);
> -                       pxa->clk_enable = 1;
> -               }
> +               if (pdata && pdata->soc_set_timing)
> +                       pdata->soc_set_timing(host, pdata);
> +               clk_enable(pxa->clk);
> +               pxa->clk_enable = 1;
>        }
>  }
>
> -static struct sdhci_ops sdhci_pxa_ops = {
> -       .set_clock = set_clock,
> -};
> +static void sdhci_pxa_notify_change(struct platform_device *dev, int state)
> +{
> +       struct sdhci_host *host = platform_get_drvdata(dev);
> +       unsigned long flags;
> +
> +       if (host) {
> +               spin_lock_irqsave(&host->lock, flags);
> +               if (state) {
> +                       dev_dbg(&dev->dev, "card inserted.\n");
> +                       host->flags &= ~SDHCI_DEVICE_DEAD;
> +               } else {
> +                       dev_dbg(&dev->dev, "card removed.\n");
> +                       host->flags |= SDHCI_DEVICE_DEAD;
> +               }
> +               tasklet_schedule(&host->card_tasklet);
> +               spin_unlock_irqrestore(&host->lock, flags);
> +       }
> +}
>
>  /*****************************************************************************\
>  *                                                                           *
> @@ -111,6 +111,12 @@ static int __devinit sdhci_pxa_probe(struct
> platform_device *pdev)
>        pxa->pdata = pdata;
>        pxa->clk_enable = 0;
>
> +       pxa->ops = kzalloc(sizeof(struct sdhci_ops), GFP_KERNEL);
> +       if (!pxa->ops) {
> +               ret = -ENOMEM;
> +               goto out;
> +       }
> +
>        pxa->clk = clk_get(dev, "PXA-SDHCLK");
>        if (IS_ERR(pxa->clk)) {
>                dev_err(dev, "failed to get io clock\n");
> @@ -134,32 +140,46 @@ static int __devinit sdhci_pxa_probe(struct
> platform_device *pdev)
>        }
>
>        host->hw_name = "MMC";
> -       host->ops = &sdhci_pxa_ops;
>        host->irq = irq;
>        host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
>
> -       if (pdata->quirks)
> +       if (pdata && pdata->flags & PXA_FLAG_CARD_PERMANENT) {
> +               /* on-chip device */
> +               host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
> +               host->mmc->caps |= MMC_CAP_NONREMOVABLE;
> +       }
> +
> +       if (pdata && pdata->quirks)
>                host->quirks |= pdata->quirks;
>
>        /* If slot design supports 8 bit data, indicate this to MMC. */
>        if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
>                host->mmc->caps |= MMC_CAP_8_BIT_DATA;
>
> +       if (pdata && pdata->soc_set_ops)
> +               pdata->soc_set_ops(pxa);
> +
> +       pxa->ops->set_clock = set_clock;
> +       host->ops = pxa->ops;
> +
>        ret = sdhci_add_host(host);
>        if (ret) {
>                dev_err(&pdev->dev, "failed to add host\n");
>                goto out;
>        }
>
> -       if (pxa->pdata->max_speed)
> -               host->mmc->f_max = pxa->pdata->max_speed;
> +       if (pdata && pdata->max_speed)
> +               host->mmc->f_max = pdata->max_speed;
>
> +       if (pdata && pdata->ext_cd_init)
> +               pdata->ext_cd_init(&sdhci_pxa_notify_change, pdata);
>        platform_set_drvdata(pdev, host);
>
>        return 0;
>  out:
>        if (host) {
>                clk_put(pxa->clk);
> +               kfree(pxa->ops);
>                if (host->ioaddr)
>                        iounmap(host->ioaddr);
>                if (pxa->res)
> @@ -173,18 +193,23 @@ out:
>
>  static int __devexit sdhci_pxa_remove(struct platform_device *pdev)
>  {
> +       struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
>        struct sdhci_host *host = platform_get_drvdata(pdev);
>        struct sdhci_pxa *pxa = sdhci_priv(host);
>        int dead = 0;
>        u32 scratch;
>
>        if (host) {
> +               if (pdata && pdata->ext_cd_cleanup)
> +                       pdata->ext_cd_cleanup(&sdhci_pxa_notify_change, pdata);
> +
>                scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
>                if (scratch == (u32)-1)
>                        dead = 1;
>
>                sdhci_remove_host(host, dead);
>
> +               kfree(pxa->ops);
>                if (host->ioaddr)
>                        iounmap(host->ioaddr);
>                if (pxa->res)
> --
> 1.7.0.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux