Based on report made by Yauhen in:
"MMC: Fix multiblock SDIO transfers in AT91 MCI" patch,
I report those changes to the brother driver: atmel-mci.
So, this patch sets SDIO transfer types: SDIO block and SDIO byte
transfers instead of using ordinary MMC block transfers.
It is checking opcode for SDIO CMD53 and setting transfer
type in MCI_CMDR register properly.
Reported-by: Yauhen Kharuzhy <yauhen.kharuzhy@xxxxxxxxxxx>
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
---
Hi Chris,
In addition to the at91_mci multiblock SDIO fix, I add this little one too as
it concerns the brother driver atmel-mci with same issue.
I hope that you will be able to queue those fixes to .37-final and stable...
Thanks a lot, best regards,
drivers/mmc/host/atmel-mci.c | 18 ++++++++++++------
1 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 301351a..ad2a7a0 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -26,6 +26,7 @@
#include <linux/stat.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
#include <mach/atmel-mci.h>
#include <linux/atmel-mci.h>
@@ -532,12 +533,17 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
data = cmd->data;
if (data) {
cmdr |= MCI_CMDR_START_XFER;
- if (data->flags & MMC_DATA_STREAM)
- cmdr |= MCI_CMDR_STREAM;
- else if (data->blocks > 1)
- cmdr |= MCI_CMDR_MULTI_BLOCK;
- else
- cmdr |= MCI_CMDR_BLOCK;
+
+ if (cmd->opcode == SD_IO_RW_EXTENDED) {
+ cmdr |= MCI_CMDR_SDIO_BLOCK;
+ } else {
+ if (data->flags & MMC_DATA_STREAM)
+ cmdr |= MCI_CMDR_STREAM;
+ else if (data->blocks > 1)
+ cmdr |= MCI_CMDR_MULTI_BLOCK;
+ else
+ cmdr |= MCI_CMDR_BLOCK;
+ }
if (data->flags & MMC_DATA_READ)
cmdr |= MCI_CMDR_TRDIR_READ;
--
1.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
