enhanced area is a new feature of eMMC4.41 card. Since the offsize and size
of enhaneced area is one time programmable register, driver will not set
them and just read these values out.
So this patch just let host driver read out the enhanced area offsize and
size if the eMMC card is enabled this feature. And expose these values to
user space through sys fs for use. The feature enabling should be done in
manufactory.
Before read out these values, host driver also need set the ERASE_GROUP_DEF
byte. If this setting this byte failed, driver will set the offsize and size
to be 0. But not sure whether need to do this.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
---
drivers/mmc/core/mmc.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mmc/card.h | 3 +
include/linux/mmc/mmc.h | 3 +
3 files changed, 98 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 77f93c3..1f49778 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -302,6 +302,64 @@ static int mmc_read_ext_csd(struct mmc_card *card)
}
if (card->ext_csd.rev >= 4) {
+ /*
+ * Enhanced area feature support
+ * check whether eMMC card is enabled enhanced area,
+ * if so, export enhanced area offset and size to
+ * user by adding sysfs interface
+ */
+ if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
+ (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
+ u8 hc_erase_grp_sz =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
+ u8 hc_wp_grp_sz =
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+ /*
+ * FIXME
+ * Not sure whether need to enable the
+ * ERASE_GROUP_DEF bit
+ */
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_ERASE_GROUP_DEF, 1);
+
+ if (err && err != -EBADMSG)
+ goto out;
+
+ if (err) {
+ /*
+ * ignore this err, just disable enhanced area
+ */
+ err = 0;
+ goto next;
+ }
+ /* update ext_csd ERASE_GRP_DEF bit */
+ ext_csd[EXT_CSD_ERASE_GROUP_DEF] = 1;
+ card->ext_csd.erase_group_def =
+ ext_csd[EXT_CSD_ERASE_GROUP_DEF];
+ /*
+ * set a flag to identify whether the enhanced
+ * user data are enabled
+ */
+ card->ext_csd.enh_data_area_en = 1;
+ /*
+ * caculate the enhanced data area offset, unit B
+ */
+ card->ext_csd.enh_data_area_off =
+ (ext_csd[139] << 24) + (ext_csd[138] << 16) +
+ (ext_csd[137] << 8) + ext_csd[136];
+ if (mmc_card_blockaddr(card))
+ card->ext_csd.enh_data_area_off <<= 9;
+ /*
+ * caculate the enhanced data area size, unit KB
+ */
+ card->ext_csd.enh_data_area_sz =
+ (ext_csd[142] << 16) + (ext_csd[141] << 8) +
+ ext_csd[140];
+ card->ext_csd.enh_data_area_sz *=
+ (size_t)(hc_erase_grp_sz * hc_wp_grp_sz);
+ card->ext_csd.enh_data_area_sz <<= 9;
+ }
+next:
card->ext_csd.sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.sec_erase_mult =
@@ -336,6 +394,9 @@ MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
+MMC_DEV_ATTR(enhen, "%d\n", card->ext_csd.enh_data_area_en);
+MMC_DEV_ATTR(enhoff, "0x%llxB\n", card->ext_csd.enh_data_area_off);
+MMC_DEV_ATTR(enhsz, "0x%xKB\n", card->ext_csd.enh_data_area_sz);
static struct attribute *mmc_std_attrs[] = {
&dev_attr_cid.attr,
@@ -349,6 +410,9 @@ static struct attribute *mmc_std_attrs[] = {
&dev_attr_name.attr,
&dev_attr_oemid.attr,
&dev_attr_serial.attr,
+ &dev_attr_enhen.attr,
+ &dev_attr_enhoff.attr,
+ &dev_attr_enhsz.attr,
NULL,
};
@@ -472,6 +536,34 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
goto free_card;
}
+ /*
+ * If enh_data_are_en is TRUE, means this init card
+ * operation is used to reinit card after a reset
+ * ERASE_GRP_DEF register value will be lost everytime
+ * after a reset or power off.
+ *
+ * FIXME
+ * Not sure whether need to enable ERASE_GRP_DEF bit.
+ */
+ if (card->ext_csd.enh_data_area_en) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_ERASE_GROUP_DEF, 1);
+
+ if (err && err != -EBADMSG)
+ goto free_card;
+
+ if (err) {
+ err = 0;
+ /*
+ * Just disable enhanced area off & sz
+ * will try to enable ERASE_GROUP_DEF
+ * during next time reinit
+ */
+ card->ext_csd.enh_data_area_off = 0;
+ card->ext_csd.enh_data_area_sz = 0;
+ }
+ }
+
if (!oldcard) {
/*
* Fetch and process extended CSD.
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 8ce0827..e850a39 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -54,6 +54,9 @@ struct mmc_ext_csd {
unsigned int sec_trim_mult; /* Secure trim multiplier */
unsigned int sec_erase_mult; /* Secure erase multiplier */
unsigned int trim_timeout; /* In milliseconds */
+ unsigned int enh_data_area_en; /* enh area enable bit */
+ loff_t enh_data_area_off; /* enh area offset */
+ size_t enh_data_area_sz; /* enh area size */
};
struct sd_scr {
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 956fbd8..97ca016 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -251,6 +251,8 @@ struct _mmc_csd {
* EXT_CSD fields
*/
+#define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
+#define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
@@ -260,6 +262,7 @@ struct _mmc_csd {
#define EXT_CSD_CARD_TYPE 196 /* RO */
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
#define EXT_CSD_S_A_TIMEOUT 217 /* RO */
+#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
#define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
--
1.6.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
