On Tue, Dec 7, 2010 at 1:03 AM, Dong, Chuanxiao <chuanxiao.dong@xxxxxxxxx> wrote: > Hello all, > How about these patches? It implemented HW reset feature. When card occurred a timeout error during reading/writing/erasing, these patches will allow driver to reset eMMC card by trigger a HW reset signal. > Does anyone have any comments about the implementation of these patches? Wolfram and Arnd already pointed out the unsuitable patch headers. Thanks! :) Hi, I'm not yet find a reason to use this feature. Now it uses the samsung and sandisk v4.41 but still no problem. I wonder what's the purpose and effect if it uses or not? Thank you, Kyungmin Park > > >> -----Original Message----- >> From: linux-mmc-owner@xxxxxxxxxxxxxxx >> [mailto:linux-mmc-owner@xxxxxxxxxxxxxxx] On Behalf Of Chuanxiao Dong >> Sent: Wednesday, December 01, 2010 8:49 PM >> To: linux-mmc@xxxxxxxxxxxxxxx >> Cc: linux-kernel@xxxxxxxxxxxxxxx; cjb@xxxxxxxxxx; arjan@xxxxxxxxxxxxxxx; >> alan@xxxxxxxxxxxxxxx; akpm@xxxxxxxxxxxxxxxxxxxx >> Subject: [PATCH v4 0/4]implement eMMC4.4 standard HW reset feature >> >> Hi, >> These are the version 4 patches to implement eMMC4.4 HW reset >> feature. Host controller can use this feature by trigger RST_n signal. >> To enable this, byte 162 of EXT_CSD register should be set. >> HW reset is implemented in mmc core layer and sdhci host layer, and it >> will be used after each reading/writing/erasing timeout error occures. >> >> change-log: >> This version change the way to detect timeout error conditions. Added a >> new routine mmc_handle_timeout_error to do this instead to do this in >> mmc_wait_for_req. Each timeout read/write/erase command can use this >> routine to do HW reset. >> >> patch1: enable HW reset capability if card support. >> >> patch2: add two new callback to implement HW reset in mmc core layer. In >> this patch, routine mmc_handle_timeout_error was added. >> >> patch3: implement hardware_reset callback for sdhci host. A new callback >> reset_emmc was defined which will be each sdhci host controller to >> implement separately. >> >> patch4: did a HW reset after each read/write/erase command. >> >> Thanks >> Chuanxiao >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
