Hi Michal,
> On Fri, Dec 03, 2010 at 05:21:10AM +0800, Hein_Tibosch wrote:
>> Hi Sahitya,
>> On 2-12-2010 19:16, Sahitya Tummala wrote:
>> > Hi Hein Tibosch,
>> >
>> > On Fri, 2010-09-03 at 05:34 +0800, Hein_Tibosch wrote:
>> >> In the latest releases of the mmc driver, the freq during
>> initialization
>> >> is set to a fixed 400 Khz. This was reportedly too fast for several
>> >> users. As there doesn't seem to be an ideal frequency
>> which-works-for-all,
>> >> Pierre suggested to let the driver try several frequencies.
>> >> <cut>
>> >> + /*
>> >> + * First we search for SDIO...
>> >> + */
>> >> + err = mmc_send_io_op_cond(host, 0, &ocr);
>> >> + if (!err) {
>> >> + if (mmc_attach_sdio(host, ocr)) {
>> >> + mmc_claim_host(host);
>> >> + /* try SDMEM (but not MMC) even if SDIO is broken */
>> >> + if (mmc_send_app_op_cond(host, 0, &ocr))
>> > In case of SDIO error, mmc_power_off() is getting called as part of
>> > mmc_detach_bus(). Shouldn't we power up the host before checking for
>> > SDMEM? Any comments?
>> I think you should ask Michal Miroslaw, as he wrote the patch for the
>> SD-combo (IO + mem)*
>>
>> But yes, in case of a failure, mmc_attach_sdio() will call
>> mmc_detach_bus()
>> which in turn will call mmc_power_off()
>>
>> And so it should be mmc_power_up() again before trying to detect SD
>> memory.
>
> Yes, you are right! This explains some things...
>
> Please try attached patch. (Not tested, but obvious enough.)
I was looking at the code and figured out this issue. I don't have any
SD-combo card to verify your patch.
Thanks
Sahitya.
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum.
> Best Regards,
> Micha³ Miros³aw
>
> ---
>
> mmc: fix detection of memory part of SD-combo card with broken SDIO
>
> In case of failure, mmc_attach_sdio() will power off the SD bus.
> Power it up and reinitialize before trying SD memory detection.
>
> Reported-by: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>
> Signed-off-by: Micha³ Miros³aw <mirq-linux@xxxxxxxxxxxx>
> ---
> drivers/mmc/core/core.c | 5 +++++
> 1 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 6286898..32a4798 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -1564,6 +1564,11 @@ void mmc_rescan(struct work_struct *work)
> * Try SDMEM (but not MMC) even if SDIO
> * is broken.
> */
> + mmc_power_up(host);
> + sdio_reset(host);
> + mmc_go_idle(host);
> + mmc_send_if_cond(host, host->ocr_avail);
> +
> if (mmc_send_app_op_cond(host, 0, &ocr))
> goto out_fail;
>
> --
> 1.7.2.3
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
