Hi,
Here are some obvious changes:
On Tue, Nov 09, 2010 at 09:17:21AM -0500, zhangfei gao wrote:
> Haojian,
>
> Would you help review, since arch/arm/plat-pxa/include/plat/sdhci.h is
> updated, thanks
>
> >From 6619812b749aa12ebf0efbe057366c2f99051bfe Mon Sep 17 00:00:00 2001
> From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxxx>
> Date: Tue, 2 Nov 2010 07:37:44 -0400
> Subject: [PATCH] sdhci-pxa: support tune_timming for various cards
>
> 1. Add pdata check, in case pdata is NULL
> 2. Add tune_timming to adjust read data/command timming without
> performance impact when crc error, as a result
> a, sd could work at 50M
> b, emmc could work at ddr50 mode
timming -> timing, throughout the patch
> 3. Remove clock_enable checking, since clock gating is still on-going
> in core stack.
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxxx>
> ---
> arch/arm/plat-pxa/include/plat/sdhci.h | 2 +
> drivers/mmc/host/sdhci-pxa.c | 51 +++++++++++++++++++++++--------
> 2 files changed, 40 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h
> b/arch/arm/plat-pxa/include/plat/sdhci.h
> index fc5ceab..8c340b1 100644
> --- a/arch/arm/plat-pxa/include/plat/sdhci.h
> +++ b/arch/arm/plat-pxa/include/plat/sdhci.h
> @@ -24,11 +24,13 @@
> * @max_speed: the maximum speed supported
> * @quirks: quirks of specific device
> * @flags: flags for platform requirement
> + * @clk_delay: clk_delay vlaue to tunning various cards
vlaue -> value
tunning -> tuning
> */
> struct sdhci_pxa_platdata {
> unsigned int max_speed;
> unsigned int quirks;
> unsigned int flags;
> + unsigned int clk_delay;
> };
>
> #endif /* __PLAT_PXA_SDHCI_H */
> diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
> index 8455c46..cf514f8 100644
> --- a/drivers/mmc/host/sdhci-pxa.c
> +++ b/drivers/mmc/host/sdhci-pxa.c
> @@ -32,6 +32,11 @@
> #define SD_FIFO_PARAM 0x104
> #define DIS_PAD_SD_CLK_GATE 0x400
>
> +#define SD_CLOCK_AND_BURST_SIZE_SETUP 0x10A
> +#define SDCLK_SEL 0x100
> +#define SDCLK_DELAY_SHIFT 9
> +#define SDCLK_DELAY_MASK 0x1f
> +
> struct sdhci_pxa {
> struct sdhci_host *host;
> struct sdhci_pxa_platdata *pdata;
> @@ -46,6 +51,26 @@ struct sdhci_pxa {
> * SDHCI core callbacks *
> * *
> \*****************************************************************************/
> +static void tune_timming(struct sdhci_host *host)
> +{
> + struct sdhci_pxa *pxa = sdhci_priv(host);
> +
> + /*
> + * tune timming of read data/command when crc error happen
> + * No perfermance impact
perfermance -> performance
> + */
> + if (pxa->pdata && 0 != pxa->pdata->clk_delay) {
> + u16 tmp;
> +
> + tmp = readw(host->ioaddr + SD_CLOCK_AND_BURST_SIZE_SETUP);
> + tmp |= (pxa->pdata->clk_delay & SDCLK_DELAY_MASK)
> + << SDCLK_DELAY_SHIFT;
> + tmp |= SDCLK_SEL;
> + writew(tmp, host->ioaddr + SD_CLOCK_AND_BURST_SIZE_SETUP);
> + }
> +
> +}
> +
> static void set_clock(struct sdhci_host *host, unsigned int clock)
> {
> struct sdhci_pxa *pxa = sdhci_priv(host);
> @@ -57,15 +82,16 @@ static void set_clock(struct sdhci_host *host,
> unsigned int clock)
> pxa->clk_enable = 0;
> }
> } else {
> - if (0 == pxa->clk_enable) {
> - if (pxa->pdata->flags & PXA_FLAG_DISABLE_CLOCK_GATING) {
> - tmp = readl(host->ioaddr + SD_FIFO_PARAM);
> - tmp |= DIS_PAD_SD_CLK_GATE;
> - writel(tmp, host->ioaddr + SD_FIFO_PARAM);
> - }
> - clk_enable(pxa->clk);
> - pxa->clk_enable = 1;
> + tune_timming(host);
It looks like tune_timing() is a void function that only gets called
once. Perhaps it should just happen inline here instead?
> + if (pxa->pdata &&
> + pxa->pdata->flags & PXA_FLAG_DISABLE_CLOCK_GATING) {
> +
> + tmp = readl(host->ioaddr + SD_FIFO_PARAM);
> + tmp |= DIS_PAD_SD_CLK_GATE;
> + writel(tmp, host->ioaddr + SD_FIFO_PARAM);
> }
> + clk_enable(pxa->clk);
> + pxa->clk_enable = 1;
> }
> }
>
> @@ -138,13 +164,13 @@ static int __devinit sdhci_pxa_probe(struct
> platform_device *pdev)
> host->irq = irq;
> host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
>
> - if (pxa->pdata->flags & PXA_FLAG_CARD_PERMANENT) {
> + if (pdata && pdata->flags & PXA_FLAG_CARD_PERMANENT) {
> /* on-chip device */
> host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
> host->mmc->caps |= MMC_CAP_NONREMOVABLE;
> }
>
> - if (pdata->quirks)
> + if (pdata && pdata->quirks)
> host->quirks |= pdata->quirks;
>
> ret = sdhci_add_host(host);
> @@ -153,9 +179,8 @@ static int __devinit sdhci_pxa_probe(struct
> platform_device *pdev)
> goto out;
> }
>
> - if (pxa->pdata->max_speed)
> - host->mmc->f_max = pxa->pdata->max_speed;
> -
> + if (pdata && pdata->max_speed)
> + host->mmc->f_max = pdata->max_speed;
> platform_set_drvdata(pdev, host);
No reason to remove the newline here.
>
> return 0;
> --
Thanks,
--
Chris Ball <cjb@xxxxxxxxxx> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
