This moves some constants from sh_mmcif.c to sh_mmcif.h
so that they can be used in sh_mmcif_boot_init().
It also alters the definition of SOFT_RST_OFF from (0 << 31) to
~SOFT_RST_ON (= ~(1 << 31)). The former seems bogus. The latter is
consistent with the code in sh_mmcif_boot_init().
Cc: Yusuke Goda <yusuke.goda.sx@xxxxxxxxxxx>
Cc: Magnus Damm <magnus.damm@xxxxxxxxx>
Signed-off-by: Simon Horman <horms@xxxxxxxxxxxx>
---
drivers/mmc/host/sh_mmcif.c | 23 -----------------------
include/linux/mmc/sh_mmcif.h | 39 ++++++++++++++++++++++++++++++++++-----
2 files changed, 34 insertions(+), 28 deletions(-)
* v1 diff against 2.6.37-rc1
* v2 rediff against Linus's current tree
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index ddd0984..3f49273 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -62,25 +62,6 @@
/* CE_BLOCK_SET */
#define BLOCK_SIZE_MASK 0x0000ffff
-/* CE_CLK_CTRL */
-#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */
-#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
-#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
-#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */
-#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \
- (1 << 9) | (1 << 8)) /* resp busy timeout */
-#define SRWDTO_29 ((1 << 7) | (1 << 6) | \
- (1 << 5) | (1 << 4)) /* read/write timeout */
-#define SCCSTO_29 ((1 << 3) | (1 << 2) | \
- (1 << 1) | (1 << 0)) /* ccs timeout */
-
-/* CE_BUF_ACC */
-#define BUF_ACC_DMAWEN (1 << 25)
-#define BUF_ACC_DMAREN (1 << 24)
-#define BUF_ACC_BUSW_32 (0 << 17)
-#define BUF_ACC_BUSW_16 (1 << 17)
-#define BUF_ACC_ATYP (1 << 16)
-
/* CE_INT */
#define INT_CCSDE (1 << 29)
#define INT_CMD12DRE (1 << 26)
@@ -165,10 +146,6 @@
STS2_AC12BSYTO | STS2_RSPBSYTO | \
STS2_AC12RSPTO | STS2_RSPTO)
-/* CE_VERSION */
-#define SOFT_RST_ON (1 << 31)
-#define SOFT_RST_OFF (0 << 31)
-
#define CLKDEV_EMMC_DATA 52000000 /* 52MHz */
#define CLKDEV_MMC_DATA 20000000 /* 20MHz */
#define CLKDEV_INIT 400000 /* 400 KHz */
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index d19e211..b4eaebf 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -59,6 +59,29 @@ struct sh_mmcif_plat_data {
#define MMCIF_CE_HOST_STS2 0x0000004C
#define MMCIF_CE_VERSION 0x0000007C
+/* CE_BUF_ACC */
+#define BUF_ACC_DMAWEN (1 << 25)
+#define BUF_ACC_DMAREN (1 << 24)
+#define BUF_ACC_BUSW_32 (0 << 17)
+#define BUF_ACC_BUSW_16 (1 << 17)
+#define BUF_ACC_ATYP (1 << 16)
+
+/* CE_CLK_CTRL */
+#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */
+#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
+#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
+#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */
+#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \
+ (1 << 9) | (1 << 8)) /* resp busy timeout */
+#define SRWDTO_29 ((1 << 7) | (1 << 6) | \
+ (1 << 5) | (1 << 4)) /* read/write timeout */
+#define SCCSTO_29 ((1 << 3) | (1 << 2) | \
+ (1 << 1) | (1 << 0)) /* ccs timeout */
+
+/* CE_VERSION */
+#define SOFT_RST_ON (1 << 31)
+#define SOFT_RST_OFF ~SOFT_RST_ON
+
static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
{
return readl(addr + reg);
@@ -149,17 +172,23 @@ extern inline void sh_mmcif_boot_init(void __iomem *base)
/* reset */
tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION);
- sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000);
- sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000);
+ sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | SOFT_RST_ON);
+ sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & SOFT_RST_OFF);
/* byte swap */
- sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000);
+ sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
/* Set block size in MMCIF hardware */
sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
- /* Enable the clock, set it to Bus clock/256 (about 325Khz)*/
- sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff);
+ /* Enable the clock, set it to Bus clock/256 (about 325Khz).
+ * It is unclear where 0x70000 comes from or if it is even needed.
+ * It is there for byte-compatibility with code that is known to
+ * work.
+ */
+ sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+ CLK_ENABLE | SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 |
+ SCCSTO_29 | 0x70000);
/* CMD0 */
sh_mmcif_boot_cmd(base, 0x00000040, 0);
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
