On Sun, Nov 7, 2010 at 12:51 PM, Daniel Drake <dsd@xxxxxxxxxx> wrote: > If you take the interface down, the card is still powered up in some > way. With SDIO runtime pm support, it shouldn't be. > When I asked the hardware guy he said it was entirely controlled by > the normal SD power pin, but a full card reset will be needed after > cycling the power. We need to understand why the wlan card on the XO-1.5 does not go through full power off/on cycle, despite software calling mmc_power_off/on. If this is solved, I don't think you will still need that rfkill driver. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
