RE: [PATCH 1/5] ARM: S5PV310: Add HSMMC support and SDHCI configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Thursday, September 16, 2010 10:37 AM Jeongbae Seo wrote:

> From: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
> 
> This patch adds to support HSMMC for S5PV310 and S5PC210 and setup for
> HSMMC host controller and also related GPIO.
> At most 4 channel can be used at the same time.
> A user can configure SDHCI data bus as 8bit or 4bit.
> 
> Signed-off-by: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
> Signed-off-by: Jeongbae Seo <jeongbae.seo@xxxxxxxxxxx>
> ---
>  arch/arm/mach-s5pv310/Kconfig            |   39 ++++++++
>  arch/arm/mach-s5pv310/Makefile           |    2 +
>  arch/arm/mach-s5pv310/setup-sdhci-gpio.c |  156 ++++++++++++++++++++++++++++++
>  arch/arm/mach-s5pv310/setup-sdhci.c      |   69 +++++++++++++
>  4 files changed, 266 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-s5pv310/setup-sdhci-gpio.c
>  create mode 100644 arch/arm/mach-s5pv310/setup-sdhci.c
> 

<snip>

> diff --git a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> new file mode 100644
> index 0000000..8db8c81
> --- /dev/null
> +++ b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> @@ -0,0 +1,156 @@
> +/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
> + *
> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com/
> + *
> + * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/gpio.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/card.h>
> +
> +#include <plat/gpio-cfg.h>
> +#include <plat/regs-sdhci.h>
> +#include <plat/sdhci.h>
> +
> +void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
> +{
> +	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> +	unsigned int gpio;
> +
> +	/* Set all the necessary GPK0[0:1] pins to special-function 2 */
> +	for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) {
> +		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> +	}
> +
> +	switch (width) {
> +	case 8:
> +		for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
> +			/* Data pin GPK1[3:6] to special-funtion 3 */
> +			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
> +			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> +			/* Setup Drive Strength */
> +			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> +		}
> +	case 4:
> +		for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6); gpio++) {
> +			/* Data pin GPK0[3:6] to special-funtion 2 */
> +			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> +			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> +			/* Setup Drive Strength */
> +			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> +		}
> +	default:
> +		break;
> +	}
> +
> +	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> +		s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP);
> +	}
> +}
> +
> +void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
> +{
> +	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> +	unsigned int gpio;
> +
> +	/* Set all the necessary GPK1[0:1] pins to special-function 2 */
> +	for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) {
> +		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> +	}
> +
> +	for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
> +		/* Data pin GPK1[3:6] to special-function 2 */
> +		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> +		/* Setup Drive Strength */
> +		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> +	}
> +
> +	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> +		s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP);
> +	}
> +}
> +
> +void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
> +{
> +	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> +	unsigned int gpio;
> +
> +	/* Set all the necessary GPK2[0:1] pins to special-function 2 */
> +	for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) {
> +		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);

Lack of "s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4)" here causes problems with 
Universal C210 and external SD-card. IMHO driver strength should be set for all MMC
pins, not only for data pins like below (and do this for all MMC blocks of course). 

> +	}
> +
> +	switch (width) {
> +	case 8:
> +		for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
> +			/* Data pin GPK3[3:6] to special-function 3 */
> +			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
> +			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> +			/* Setup Drive Strength */
> +			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> +		}
> +	case 4:
> +		for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6); gpio++) {
> +			/* Data pin GPK2[3:6] to special-function 2 */
> +			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> +			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> +			/* Setup Drive Strength */
> +			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> +		}
> +	default:
> +		break;
> +	}
> +
> +	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> +		s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP);
> +	}
> +}
> +
> +void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
> +{
> +	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
> +	unsigned int gpio;
> +
> +	/* Set all the necessary GPK3[0:1] pins to special-function 2 */
> +	for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) {
> +		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> +	}
> +
> +	for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
> +		/* Data pin GPK3[3:6] to special-function 2 */
> +		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
> +
> +		/* Setup Drive Strength */
> +		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
> +	}
> +
> +	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
> +		s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2));
> +		s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP);
> +	}
> +}

<snip>

Best regards
--
Marek Szyprowski
Samsung Poland R&D Center


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux