On Tue, Sep 28, 2010 at 10:41:29AM +0200, Giuseppe CAVALLARO wrote:
> Some platforms based on the shdci-pltfm device driver need to
> set own quirks (that currently are in drivers/mmc/host/sdhci.h).
>
> This patch splits this header file in two parts:
> o drivers/mmc/host/sdhci.h
> include the HC registers and I/O accessors.
> o include/linux/mmc/sdhci.h
> include the sdhci structure and quirks.
>
> Instead of including the devices/mmc/host/shdci.h, all
> the platforms, based on shdci-pltfm, can only include:
> include/linux/mmc/sdhci.h and include/linux/sdhci-pltfm.h.
>
> Also This patch avoids to add/change the calls/flags in the
> sdhci_pltfm_data structure.
>
> It has been tested on STM platforms (e.g. STx7106, STx7108,
> STx5206) where the driver is configured and used as shown
> in the example below:
>
> [snip]
> static int mmc_pad_resources(struct sdhci_host *sdhci)
> {
> if (!devm_stm_pad_claim(sdhci->mmc->parent,
> &stx7108_mmc_pad_config,
> dev_name(sdhci->mmc->parent)))
> return -ENODEV;
>
> return 0;
> }
>
> static struct sdhci_pltfm_data stx7108_mmc_platform_data = {
> .init = mmc_pad_resources,
> .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> };
>
> static struct platform_device stx7108_mmc_device = {
> .name = "sdhci",
> [snip]
>
> Note: drivers/mmc/host/sdhci.h also includes the linux/mmc/sdhci.h
> and no modifications should be needed on other sdhci-<XXX> drivers.
>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
Reviewed-by: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
> ---
> drivers/mmc/host/sdhci.h | 138 ++-----------------------------------------
> include/linux/mmc/sdhci.h | 144 +++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 151 insertions(+), 131 deletions(-)
> create mode 100644 include/linux/mmc/sdhci.h
>
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 112543a..410ee8a 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -1,6 +1,8 @@
> /*
> * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver
> *
> + * Header file for Host Controller registers and I/O accessors.
> + *
> * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
> *
> * This program is free software; you can redistribute it and/or modify
> @@ -8,14 +10,16 @@
> * the Free Software Foundation; either version 2 of the License, or (at
> * your option) any later version.
> */
> -#ifndef __SDHCI_H
> -#define __SDHCI_H
> +#ifndef __SDHCI_HW_H
> +#define __SDHCI_HW_H
>
> #include <linux/scatterlist.h>
> #include <linux/compiler.h>
> #include <linux/types.h>
> #include <linux/io.h>
>
> +#include <linux/mmc/sdhci.h>
> +
> /*
> * Controller registers
> */
> @@ -192,134 +196,6 @@
> #define SDHCI_MAX_DIV_SPEC_200 256
> #define SDHCI_MAX_DIV_SPEC_300 2046
>
> -struct sdhci_ops;
> -
> -struct sdhci_host {
> - /* Data set by hardware interface driver */
> - const char *hw_name; /* Hardware bus name */
> -
> - unsigned int quirks; /* Deviations from spec. */
> -
> -/* Controller doesn't honor resets unless we touch the clock register */
> -#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
> -/* Controller has bad caps bits, but really supports DMA */
> -#define SDHCI_QUIRK_FORCE_DMA (1<<1)
> -/* Controller doesn't like to be reset when there is no card inserted. */
> -#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
> -/* Controller doesn't like clearing the power reg before a change */
> -#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
> -/* Controller has flaky internal state so reset it on each ios change */
> -#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
> -/* Controller has an unusable DMA engine */
> -#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
> -/* Controller has an unusable ADMA engine */
> -#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
> -/* Controller can only DMA from 32-bit aligned addresses */
> -#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
> -/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
> -#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
> -/* Controller can only ADMA chunks that are a multiple of 32 bits */
> -#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
> -/* Controller needs to be reset after each request to stay stable */
> -#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
> -/* Controller needs voltage and power writes to happen separately */
> -#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
> -/* Controller provides an incorrect timeout value for transfers */
> -#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
> -/* Controller has an issue with buffer bits for small transfers */
> -#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
> -/* Controller does not provide transfer-complete interrupt when not busy */
> -#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
> -/* Controller has unreliable card detection */
> -#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
> -/* Controller reports inverted write-protect state */
> -#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
> -/* Controller has nonstandard clock management */
> -#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
> -/* Controller does not like fast PIO transfers */
> -#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
> -/* Controller losing signal/interrupt enable states after reset */
> -#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
> -/* Controller has to be forced to use block size of 2048 bytes */
> -#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
> -/* Controller cannot do multi-block transfers */
> -#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
> -/* Controller can only handle 1-bit data transfers */
> -#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
> -/* Controller needs 10ms delay between applying power and clock */
> -#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
> -/* Controller uses SDCLK instead of TMCLK for data timeouts */
> -#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
> -/* Controller reports wrong base clock capability */
> -#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
> -/* Controller cannot support End Attribute in NOP ADMA descriptor */
> -#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
> -/* Controller is missing device caps. Use caps provided by host */
> -#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
> -/* Controller uses Auto CMD12 command to stop the transfer */
> -#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
> -/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
> -#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
> -
> - int irq; /* Device IRQ */
> - void __iomem * ioaddr; /* Mapped address */
> -
> - const struct sdhci_ops *ops; /* Low level hw interface */
> -
> - struct regulator *vmmc; /* Power regulator */
> -
> - /* Internal data */
> - struct mmc_host *mmc; /* MMC structure */
> - u64 dma_mask; /* custom DMA mask */
> -
> -#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
> - struct led_classdev led; /* LED control */
> - char led_name[32];
> -#endif
> -
> - spinlock_t lock; /* Mutex */
> -
> - int flags; /* Host attributes */
> -#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
> -#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
> -#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
> -#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
> -
> - unsigned int version; /* SDHCI spec. version */
> -
> - unsigned int max_clk; /* Max possible freq (MHz) */
> - unsigned int timeout_clk; /* Timeout freq (KHz) */
> -
> - unsigned int clock; /* Current clock (MHz) */
> - u8 pwr; /* Current voltage */
> -
> - struct mmc_request *mrq; /* Current request */
> - struct mmc_command *cmd; /* Current command */
> - struct mmc_data *data; /* Current data request */
> - unsigned int data_early:1; /* Data finished before cmd */
> -
> - struct sg_mapping_iter sg_miter; /* SG state for PIO */
> - unsigned int blocks; /* remaining PIO blocks */
> -
> - int sg_count; /* Mapped sg entries */
> -
> - u8 *adma_desc; /* ADMA descriptor table */
> - u8 *align_buffer; /* Bounce buffer */
> -
> - dma_addr_t adma_addr; /* Mapped ADMA descr. table */
> - dma_addr_t align_addr; /* Mapped bounce buffer */
> -
> - struct tasklet_struct card_tasklet; /* Tasklet structures */
> - struct tasklet_struct finish_tasklet;
> -
> - struct timer_list timer; /* Timer for timeouts */
> -
> - unsigned int caps; /* Alternative capabilities */
> -
> - unsigned long private[0] ____cacheline_aligned;
> -};
> -
> -
> struct sdhci_ops {
> #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
> u32 (*read_l)(struct sdhci_host *host, int reg);
> @@ -440,4 +316,4 @@ extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
> extern int sdhci_resume_host(struct sdhci_host *host);
> #endif
>
> -#endif /* __SDHCI_H */
> +#endif /* __SDHCI_HW_H */
> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
> new file mode 100644
> index 0000000..1fdc673
> --- /dev/null
> +++ b/include/linux/mmc/sdhci.h
> @@ -0,0 +1,144 @@
> +/*
> + * linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
> + *
> + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + */
> +#ifndef __SDHCI_H
> +#define __SDHCI_H
> +
> +#include <linux/scatterlist.h>
> +#include <linux/compiler.h>
> +#include <linux/types.h>
> +#include <linux/io.h>
> +#include <linux/mmc/host.h>
> +
> +struct sdhci_host {
> + /* Data set by hardware interface driver */
> + const char *hw_name; /* Hardware bus name */
> +
> + unsigned int quirks; /* Deviations from spec. */
> +
> +/* Controller doesn't honor resets unless we touch the clock register */
> +#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
> +/* Controller has bad caps bits, but really supports DMA */
> +#define SDHCI_QUIRK_FORCE_DMA (1<<1)
> +/* Controller doesn't like to be reset when there is no card inserted. */
> +#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
> +/* Controller doesn't like clearing the power reg before a change */
> +#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
> +/* Controller has flaky internal state so reset it on each ios change */
> +#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
> +/* Controller has an unusable DMA engine */
> +#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
> +/* Controller has an unusable ADMA engine */
> +#define SDHCI_QUIRK_BROKEN_ADMA (1<<6)
> +/* Controller can only DMA from 32-bit aligned addresses */
> +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7)
> +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
> +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8)
> +/* Controller can only ADMA chunks that are a multiple of 32 bits */
> +#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9)
> +/* Controller needs to be reset after each request to stay stable */
> +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10)
> +/* Controller needs voltage and power writes to happen separately */
> +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
> +/* Controller provides an incorrect timeout value for transfers */
> +#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
> +/* Controller has an issue with buffer bits for small transfers */
> +#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
> +/* Controller does not provide transfer-complete interrupt when not busy */
> +#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
> +/* Controller has unreliable card detection */
> +#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
> +/* Controller reports inverted write-protect state */
> +#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
> +/* Controller has nonstandard clock management */
> +#define SDHCI_QUIRK_NONSTANDARD_CLOCK (1<<17)
> +/* Controller does not like fast PIO transfers */
> +#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
> +/* Controller losing signal/interrupt enable states after reset */
> +#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET (1<<19)
> +/* Controller has to be forced to use block size of 2048 bytes */
> +#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20)
> +/* Controller cannot do multi-block transfers */
> +#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21)
> +/* Controller can only handle 1-bit data transfers */
> +#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22)
> +/* Controller needs 10ms delay between applying power and clock */
> +#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23)
> +/* Controller uses SDCLK instead of TMCLK for data timeouts */
> +#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24)
> +/* Controller reports wrong base clock capability */
> +#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25)
> +/* Controller cannot support End Attribute in NOP ADMA descriptor */
> +#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
> +/* Controller is missing device caps. Use caps provided by host */
> +#define SDHCI_QUIRK_MISSING_CAPS (1<<27)
> +/* Controller uses Auto CMD12 command to stop the transfer */
> +#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)
> +/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
> +#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29)
> +
> + int irq; /* Device IRQ */
> + void __iomem *ioaddr; /* Mapped address */
> +
> + const struct sdhci_ops *ops; /* Low level hw interface */
> +
> + struct regulator *vmmc; /* Power regulator */
> +
> + /* Internal data */
> + struct mmc_host *mmc; /* MMC structure */
> + u64 dma_mask; /* custom DMA mask */
> +
> +#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
> + struct led_classdev led; /* LED control */
> + char led_name[32];
> +#endif
> +
> + spinlock_t lock; /* Mutex */
> +
> + int flags; /* Host attributes */
> +#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
> +#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
> +#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
> +#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
> +
> + unsigned int version; /* SDHCI spec. version */
> +
> + unsigned int max_clk; /* Max possible freq (MHz) */
> + unsigned int timeout_clk; /* Timeout freq (KHz) */
> +
> + unsigned int clock; /* Current clock (MHz) */
> + u8 pwr; /* Current voltage */
> +
> + struct mmc_request *mrq; /* Current request */
> + struct mmc_command *cmd; /* Current command */
> + struct mmc_data *data; /* Current data request */
> + unsigned int data_early:1; /* Data finished before cmd */
> +
> + struct sg_mapping_iter sg_miter; /* SG state for PIO */
> + unsigned int blocks; /* remaining PIO blocks */
> +
> + int sg_count; /* Mapped sg entries */
> +
> + u8 *adma_desc; /* ADMA descriptor table */
> + u8 *align_buffer; /* Bounce buffer */
> +
> + dma_addr_t adma_addr; /* Mapped ADMA descr. table */
> + dma_addr_t align_addr; /* Mapped bounce buffer */
> +
> + struct tasklet_struct card_tasklet; /* Tasklet structures */
> + struct tasklet_struct finish_tasklet;
> +
> + struct timer_list timer; /* Timer for timeouts */
> +
> + unsigned int caps; /* Alternative capabilities */
> +
> + unsigned long private[0] ____cacheline_aligned;
> +};
> +#endif /* __SDHCI_H */
> --
> 1.5.5.6
>
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Attachment:
signature.asc
Description: Digital signature
