Hi Tony, On Sat, Sep 25, 2010 at 6:08 AM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > * kishore kadiyala <kishore.kadiyala@xxxxxx> [100924 10:05]: >> Adding card detect callback function and card detect configuration >> function for MMC1 Controller on OMAP4. >> >> Card detect configuration function does initial configuration of the >> MMC Control & PullUp-PullDown registers of Phoenix. >> >> For MMC1 Controller, card detect interrupt source is >> twl6030 which is non-gpio. The card detect call back function provides >> card present/absent status by reading MMC Control register present >> on twl6030. >> >> Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect, >> the suspend/resume initialization which was done in omap_hsmmc_gpio_init >> previously is moved to the probe thus making it generic for both OMAP3 & OMAP4. > >> --- a/drivers/mfd/twl6030-irq.c >> +++ b/drivers/mfd/twl6030-irq.c > > Looks like this patch should be sent to Samuel Ortiz as it's mostly > mfd related. Thanks , I will send this patch to Samuel. <snip> Regards, Kishore -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
