Hello, I have a Dell Latitude E6410 laptop with the following Ricoh reader: 03:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 03) (prog-if 01) Subsystem: Dell Device 040a Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f2c40000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci The driver has been failing with ugly errors for a long time and I was following [1] (pointed out from [2]) to get proper support. According to [2], 2.6.36 is supposed to contain what's needed to support my reader, but 2.6.36-rc3 still fails to read my SD card. It just says mmc0: new high speed SD card at address b368 And nothing else happens. dmesg with mmc debug enabled is available at https://bugzilla.redhat.com/attachment.cgi?id=447442 For the record, the same SD card works fine on a Dell Latitude E6500 (older model) with Ubuntu 10.4 03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) I was told to report the upstream here, so here I am. Brice [1] https://bugzilla.redhat.com/show_bug.cgi?id=596475 [2] https://bugzilla.kernel.org/show_bug.cgi?id=16390 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
