From: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
This patch adds to support no internal clock divider in SDHCI.
The external clock divider can be used to make a proper clock
because SDHCI doesn't support internal clock divider by itself.
Signed-off-by: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
Signed-off-by: Jeongbae Seo <jeongbae.seo@xxxxxxxxxxx>
Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-s3c.c | 60 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 60 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index e6e0438..5ad5ed7 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -96,6 +96,13 @@ static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
unsigned int rate, max;
int clk;
+ /*
+ * There is only one clock source(sclk) if there is no clock divider
+ * in the host controller
+ */
+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
+ return clk_round_rate(ourhost->clk_bus[2], UINT_MAX);
+
/* note, a reset will reset the clock source */
sdhci_s3c_check_sclk(host);
@@ -130,6 +137,15 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
if (!clksrc)
return UINT_MAX;
+ /*
+ * There is only one clock source(sclk) if there is no clock divider
+ * in the host controller
+ */
+ if (ourhost->host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
+ rate = clk_round_rate(clksrc, wanted);
+ return wanted - rate;
+ }
+
rate = clk_get_rate(clksrc);
for (div = 1; div < 256; div *= 2) {
@@ -159,6 +175,7 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
int best_src = 0;
int src;
u32 ctrl;
+ unsigned int timeout;
/* don't bother if the clock is going off. */
if (clock == 0)
@@ -204,6 +221,35 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
(ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr,
&ios, NULL);
}
+
+ /*
+ * There is only one clock source(sclk) if there is no clock divider
+ * in the host controller
+ */
+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
+ writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+ clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+
+ writew(SDHCI_CLOCK_INT_EN, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = 20;
+ while (!((sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ printk(KERN_ERR "%s: clock never stabilised.\n"
+ , mmc_hostname(host->mmc));
+ return;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ writew(SDHCI_CLOCK_INT_EN | SDHCI_CLOCK_CARD_EN,
+ host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+ host->clock = clock;
+ }
}
/**
@@ -221,6 +267,13 @@ static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
unsigned int delta, min = UINT_MAX;
int src;
+ /*
+ * There is only one clock source(sclk) if there is no clock divider
+ * in the host controller
+ */
+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
+ return clk_round_rate(ourhost->clk_bus[2], 400000);
+
for (src = 0; src < MAX_BUS_CLK; src++) {
delta = sdhci_s3c_consider_clock(ourhost, src, 0);
if (delta == UINT_MAX)
@@ -425,6 +478,13 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+ /*
+ * If controller does not have internal clock divider,
+ * we need to use another method with setup a quirk.
+ */
+ if (pdata->clk_type)
+ host->quirks |= SDHCI_QUIRK_NONSTANDARD_CLOCK;
+
/* It supports additional host capabilities if needed */
if (pdata->host_caps)
host->mmc->caps |= pdata->host_caps;
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
