Re: [PATCH] MMC: move regulator handling closer to core v3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mark Brown wrote:
On Thu, Sep 09, 2010 at 09:01:27AM +0300, Adrian Hunter wrote:

As an aside, I would like to enhance the regulator framework to
enable boards to hook their code directly into the regulator.

What do you mean when you say that you would like boards to "hook
directly into the regulator" - what do you want to be able to do?
Is this the notifiers?  Do you need more of them?

There would need to be notifiers before and after any change to the
voltage.  However the notifiers would have to be set up before or
during regulator initialisation because initialisation already can
change the voltage e.g. in set_machine_constraints.


Arguably this is essential to allow pbias configuration (without
which the board may be damaged) so that regulator_enable/disable
can be used independently of the board, or for example to allow

I can't parse this at all I'm afraid.  Could you be more specific about
what you mean by using enable and disable independantly of the board -
clearly the consumer drivers are already able to be board independant?

For OMAP3 (and OMAP2 in some cases) the 1st SD/SDIO/MMC controller
can operate at either 1.8V or 3V, however at 3V the board must apply
voltage level shifting (PBIAS configuation).  Currently the
level-shifting is done by board code that must be called before and
after the voltage changes.  The omap_hsmmc driver calls the board
code via callbacks in platform data (.before_set_reg and
.after_set_reg).


the regulator core to turn the regulator on/off at initialisation.

The regulator core already supports enabling or disabling regulators
from the machine constraints which I *think* is what you're looking for
but since I can't follow what you're saying above I'm not sure.

Yes that is what I would like, but it won't work at present because
the core does not do the PBIAS configuration.

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux