Re: [PATCH] sdhci - add public definition of quirks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Any comments on this patch from the list?

On Mon, Feb 22, 2010 at 11:33:48PM +0300, dmitry pervushin wrote:
> Hi Pierre, Richard,
> 
> The patch adds ability to architectures that use sdhci-pltfm driver to
> provide their own quirks via platform_data parameter of sdhci devices.
> 
> Signed-off-by: dmitry pervushin <dpervushin@xxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-pltfm.c |    5 ++
>  drivers/mmc/host/sdhci.h       |   52 ------------------------------
>  include/linux/mmc/sdhci.h      |   69 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 75 insertions(+), 51 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
> index 297f40a..766eef4 100644
> --- a/drivers/mmc/host/sdhci-pltfm.c
> +++ b/drivers/mmc/host/sdhci-pltfm.c
> @@ -51,6 +51,7 @@ static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
>  {
>  	struct sdhci_host *host;
>  	struct resource *iomem;
> +	struct sdhci_platform_data *pdata;
>  	int ret;
>  
>  	BUG_ON(pdev == NULL);
> @@ -75,9 +76,13 @@ static int __devinit sdhci_pltfm_probe(struct platform_device *pdev)
>  		goto err;
>  	}
>  
> +	pdata = pdev->dev.platform_data;
> +
>  	host->hw_name = "platform";
>  	host->ops = &sdhci_pltfm_ops;
>  	host->irq = platform_get_irq(pdev, 0);
> +	if (pdata)
> +		host->quirks = pdata->quirks;
>  
>  	if (!request_mem_region(iomem->start, resource_size(iomem),
>  		mmc_hostname(host->mmc))) {
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 842f46f..ecd4b29 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -16,6 +16,7 @@
>  #include <linux/types.h>
>  #include <linux/io.h>
>  
> +#include <linux/mmc/sdhci.h>
>  /*
>   * Controller registers
>   */
> @@ -186,57 +187,6 @@ struct sdhci_host {
>  
>  	unsigned int		quirks;		/* Deviations from spec. */
>  
> -/* Controller doesn't honor resets unless we touch the clock register */
> -#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
> -/* Controller has bad caps bits, but really supports DMA */
> -#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
> -/* Controller doesn't like to be reset when there is no card inserted. */
> -#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
> -/* Controller doesn't like clearing the power reg before a change */
> -#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
> -/* Controller has flaky internal state so reset it on each ios change */
> -#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
> -/* Controller has an unusable DMA engine */
> -#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
> -/* Controller has an unusable ADMA engine */
> -#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
> -/* Controller can only DMA from 32-bit aligned addresses */
> -#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
> -/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
> -#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
> -/* Controller can only ADMA chunks that are a multiple of 32 bits */
> -#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
> -/* Controller needs to be reset after each request to stay stable */
> -#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
> -/* Controller needs voltage and power writes to happen separately */
> -#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
> -/* Controller provides an incorrect timeout value for transfers */
> -#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
> -/* Controller has an issue with buffer bits for small transfers */
> -#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
> -/* Controller does not provide transfer-complete interrupt when not busy */
> -#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
> -/* Controller has unreliable card detection */
> -#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
> -/* Controller reports inverted write-protect state */
> -#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
> -/* Controller has nonstandard clock management */
> -#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1<<17)
> -/* Controller does not like fast PIO transfers */
> -#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
> -/* Controller losing signal/interrupt enable states after reset */
> -#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
> -/* Controller has to be forced to use block size of 2048 bytes */
> -#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
> -/* Controller cannot do multi-block transfers */
> -#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
> -/* Controller can only handle 1-bit data transfers */
> -#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
> -/* Controller needs 10ms delay between applying power and clock */
> -#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
> -/* Controller uses SDCLK instead of TMCLK for data timeouts */
> -#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
> -
>  	int			irq;		/* Device IRQ */
>  	void __iomem *		ioaddr;		/* Mapped address */
>  
> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
> new file mode 100644
> index 0000000..c3fcaa9
> --- /dev/null
> +++ b/include/linux/mmc/sdhci.h
> @@ -0,0 +1,69 @@
> +/*
> + * include/linux/mmc/sdhci.h - public definition of 'quirks' bitfield
> + *
> + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + */
> +#ifndef __LINUX_SDHCI_H
> +#define __LINUX_SDHCI_H
> +
> +/* Controller doesn't honor resets unless we touch the clock register */
> +#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
> +/* Controller has bad caps bits, but really supports DMA */
> +#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
> +/* Controller doesn't like to be reset when there is no card inserted. */
> +#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
> +/* Controller doesn't like clearing the power reg before a change */
> +#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
> +/* Controller has flaky internal state so reset it on each ios change */
> +#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
> +/* Controller has an unusable DMA engine */
> +#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
> +/* Controller has an unusable ADMA engine */
> +#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
> +/* Controller can only DMA from 32-bit aligned addresses */
> +#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
> +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
> +#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
> +/* Controller can only ADMA chunks that are a multiple of 32 bits */
> +#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
> +/* Controller needs to be reset after each request to stay stable */
> +#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
> +/* Controller needs voltage and power writes to happen separately */
> +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
> +/* Controller provides an incorrect timeout value for transfers */
> +#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
> +/* Controller has an issue with buffer bits for small transfers */
> +#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
> +/* Controller does not provide transfer-complete interrupt when not busy */
> +#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
> +/* Controller has unreliable card detection */
> +#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
> +/* Controller reports inverted write-protect state */
> +#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
> +/* Controller has nonstandard clock management */
> +#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1<<17)
> +/* Controller does not like fast PIO transfers */
> +#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
> +/* Controller losing signal/interrupt enable states after reset */
> +#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
> +/* Controller has to be forced to use block size of 2048 bytes */
> +#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
> +/* Controller cannot do multi-block transfers */
> +#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
> +/* Controller can only handle 1-bit data transfers */
> +#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
> +/* Controller needs 10ms delay between applying power and clock */
> +#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
> +/* Controller uses SDCLK instead of TMCLK for data timeouts */
> +#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
> +
> +struct sdhci_platform_data {
> +	unsigned int quirks;
> +};
> +
> +#endif /* __LINUX_SDHCI_H */
> 
> 
> --

-- 
Chris Ball   <cjb@xxxxxxxxxx>   <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux