From: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx> P4080 ESDHC controller does not support 1.8V and 3.0V voltage. but the host controller capabilities register wrongly set the bits. This patch adds the workaround to correct the weird voltage setting bits. Only 3.3V voltage is supported for P4080 ESDHC controller. Signed-off-by: Roy Zang <tie-fei.zang@xxxxxxxxxxxxx> Cc: Jerry Huang <Chang-Ming.Huang@xxxxxxxxxxxxx> Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> Cc: Kumar Gala <galak@xxxxxxxxxxxxxxxxx> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx> Cc: <linux-mmc@xxxxxxxxxxxxxxx> Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> --- arch/powerpc/boot/dts/p4080ds.dts | 1 + 1 file changed, 1 insertion(+) diff -puN arch/powerpc/boot/dts/p4080ds.dts~dts-add-esdhc-weird-voltage-bits-workaround arch/powerpc/boot/dts/p4080ds.dts --- a/arch/powerpc/boot/dts/p4080ds.dts~dts-add-esdhc-weird-voltage-bits-workaround +++ a/arch/powerpc/boot/dts/p4080ds.dts @@ -280,6 +280,7 @@ reg = <0x114000 0x1000>; interrupts = <48 2>; interrupt-parent = <&mpic>; + voltage-ranges = <3300 3300>; sdhci,auto-cmd12; }; _ -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
